Classic Hearbeat...the best! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 IRON · 12-16-2011, 11:15 PM

Ok,...here goes. Today I went over to Wes's place to get lock cylinders for one of my trucks. You know the situation...stick the key in and you have to wiggle and sometimes cus to get the key to turn. Well, Wes had them in stock and I wanted something to do. So I pay for the parts, with the card and started talking to him about my column problem. So I purchase another part...get the card out and pay. On my way out he explains, in detail, how to remove the ignition lock...no problem. I went home and started the procedure. When I started, it was'nt a problem....45 minutes later, a different story. I decided to step away from it and go get something for dinner. Since tacos sounded good, I shopped the store and head for the checkout line. Now its my turn to pay, again....but this time no card (but I did have a backup). I'm thinkin' it has to be at Wes's place. I call, he has it and says if I hurry he'll leave a little money for me! What a guy! When I headed back over, I figured he could show me the technique to remove the cylinder. On arrival, he was sitting, smiling (almost laughing) when he handed it back to me (I deserved it). Asking him to show me he got up, walked to the truck and quickly removed and replace the lock! He said, "...they do put up a fight sometimes". A fight? He went into the fight and kicked its a#%! My switch apparently doesn't have the accessory side...maybe thats what was tougher?
Anyway, thanks Wes. You get a Kudos from me. I even bought another lock set for the other truck....maybe I can do this one on my own.

**70cst** · 12-17-2011, 12:33 AM

Great story

eightbanger · 12-17-2011, 02:43 PM

He's a lovely bloke, and your story only verifies that. I've only ever had the pleasure of talking to him on the phone....would really like to be able to meet him like you one day.

**Classic Heartbeat** · 12-19-2011, 06:36 PM

Thanks for the kind words guys..

Not much that I have'nt ran into on these trucks. I have learned a few tricks along the way

. Anyway I am happy to have changed the cylinder for you and I hope the other one went smooth for you.

WES

12-16-2011, 11:15 PM	#1
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Classic Hearbeat...the best! Ok,...here goes. Today I went over to Wes's place to get lock cylinders for one of my trucks. You know the situation...stick the key in and you have to wiggle and sometimes cus to get the key to turn. Well, Wes had them in stock and I wanted something to do. So I pay for the parts, with the card and started talking to him about my column problem. So I purchase another part...get the card out and pay. On my way out he explains, in detail, how to remove the ignition lock...no problem. I went home and started the procedure. When I started, it was'nt a problem....45 minutes later, a different story. I decided to step away from it and go get something for dinner. Since tacos sounded good, I shopped the store and head for the checkout line. Now its my turn to pay, again....but this time no card (but I did have a backup). I'm thinkin' it has to be at Wes's place. I call, he has it and says if I hurry he'll leave a little money for me! What a guy! When I headed back over, I figured he could show me the technique to remove the cylinder. On arrival, he was sitting, smiling (almost laughing) when he handed it back to me (I deserved it). Asking him to show me he got up, walked to the truck and quickly removed and replace the lock! He said, "...they do put up a fight sometimes". A fight? He went into the fight and kicked its a#%! My switch apparently doesn't have the accessory side...maybe thats what was tougher? Anyway, thanks Wes. You get a Kudos from me. I even bought another lock set for the other truck....maybe I can do this one on my own.

12-17-2011, 12:33 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Classic Hearbeat...the best! Great story __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-17-2011, 02:43 PM	#3
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Classic Hearbeat...the best! He's a lovely bloke, and your story only verifies that. I've only ever had the pleasure of talking to him on the phone....would really like to be able to meet him like you one day. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

12-19-2011, 06:36 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Classic Hearbeat...the best! Thanks for the kind words guys.. Not much that I have'nt ran into on these trucks. I have learned a few tricks along the way. Anyway I am happy to have changed the cylinder for you and I hope the other one went smooth for you. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.