Hello all :) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

elcaminodragster · 12-20-2011, 03:29 AM

So tuesday night I bought a 71 C20 for $800!!!
Its a little rought around the edges but if you look passed all the dirt and crud lol its a great deal!
Its a 3/4ton 8 lug wood bed 350/350 combo with a dana 60 rear.
The kid didnt know much about the truck at all he bolted a eddy carb onto a qjet intake without the spacer and coundt figure out the problem and lost intrest in the truck.
It was sitting for about 2 years with a low milage engine and trans. the truck needs a lot of help but nothing serious is wrong with the truck at all. the worst issue is the driver rocker needs to be replaced and the wood bed is rotted.
Theres quite a few little things that it needs but nothing thats costly or hard to do.
So here are some pics of the truck...

Posted via Mobile Device

**Clyde65** · 12-22-2011, 01:06 PM

Welcome and good find, nothing like a man and his truck!

elcaminodragster · 12-22-2011, 04:55 PM

I'm very excited to get this thing driving. I want it driving by the end of January. I won't have any prettys done but I'll have new brakes all new weather stripping and some engine work.

The rust issues are going to be the hardest tho. I've never done rocker panels before. Tho after watching vids on YouTube it seems fairly straight forward.
Posted via Mobile Device

**Clyde65** · 12-23-2011, 12:16 PM

Thats a good plan, get it safe, get it running and drive the crap out of her...the rest will come with time and money

12-20-2011, 03:29 AM	#1
elcaminodragster Registered User Join Date: Dec 2011 Location: Modesto CA Posts: 55	Hello all :) So tuesday night I bought a 71 C20 for $800!!! Its a little rought around the edges but if you look passed all the dirt and crud lol its a great deal! Its a 3/4ton 8 lug wood bed 350/350 combo with a dana 60 rear. The kid didnt know much about the truck at all he bolted a eddy carb onto a qjet intake without the spacer and coundt figure out the problem and lost intrest in the truck. It was sitting for about 2 years with a low milage engine and trans. the truck needs a lot of help but nothing serious is wrong with the truck at all. the worst issue is the driver rocker needs to be replaced and the wood bed is rotted. Theres quite a few little things that it needs but nothing thats costly or hard to do. So here are some pics of the truck... Posted via Mobile Device

12-22-2011, 01:06 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Hello all :) Welcome and good find, nothing like a man and his truck! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-22-2011, 04:55 PM	#3
elcaminodragster Registered User Join Date: Dec 2011 Location: Modesto CA Posts: 55	Re: Hello all :) I'm very excited to get this thing driving. I want it driving by the end of January. I won't have any prettys done but I'll have new brakes all new weather stripping and some engine work. The rust issues are going to be the hardest tho. I've never done rocker panels before. Tho after watching vids on YouTube it seems fairly straight forward. Posted via Mobile Device

12-23-2011, 12:16 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Hello all :) Thats a good plan, get it safe, get it running and drive the crap out of her...the rest will come with time and money __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.