The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board > Blazer and Suburban Stuff

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-26-2011, 06:07 PM   #1
jeffg1010
Registered User
 
jeffg1010's Avatar
 
Join Date: Aug 2010
Location: Mooresville, NC
Posts: 2,675
Parting a complete 1971 Blazer 4x4

AVAILABLE PARTS LIST -UPDATED: 02/11/12-
There is a lot of photos spread throughout this thread, I added more photos below, but I have over 200 photos in a photobucket album at this link: http://s213.photobucket.com/albums/c...arts%20Blazer/

There is A LOT of good parts on this Blazer and I have tried to document all of them. (including a lot of good patch pieces ranging from floor pans, to rear floor and even a few body pieces. Not to mention a complete windshield/firewall/windshield/dash and partial floor pan that is in good shape with only minor rust. The truck is now torn down to bare frame and everything is ready to buy. Let me know what you are looking for

Complete K5 Blazer, quarters and rockers are shot. Floor pans are decent except around the doors, Good frame from what I have seen. Original 307 engine with 3 speed on the column, 56,000 original miles from what I have been told. Runs and 4wd works, so transfer case should be good. Nice uncut dash, Windshield has a little fog around the edges but windshield frame is in good shape. But there is a lot of good parts and patches on this truck. let me know quick what you need. Good double wall top, minus the hatch.

The truck is located in WV, but I will bring any part you want back to NC if you are interested and live in the Charlotte area. I can also keep parts stored until Auto Fair or Good Guys in the Spring if you pay now.

Liftgate, sunvisors and rear seat are already spoken for.

Update: Rough price list is below, I have no clue how to price this stuff, so feel free to give me feedback. Many of the prices were taken from other threads, so I know I am close.

ALSO... now parting out the chassis!

1. Under Dash Speaker: $40.00 - SOLD
2. Painted Bumpers: $100.00 for both or $50.00 each - SOLD
3. Complete Doors w/ wing glass: $100 for the pair w/out inner door panels, $130 with panels-SOLD
5. Crossmembers-
6. 6 lug rally wheels: $75.00/set
7. Hubs: -
8. Upper radiator tube with end hoses: $20.00 - SOLD
9. Front and Rear Carpet hold downs: $20.00/ pair-SOLD
10. Inside Door panels: $40.00 / pair-SOLD
11. E-Brake Cables:
12. Front Seat Belts: $40.00 / pair-SOLD

12. Front Seats -SOLD
13. Front Seat Brackets/Tracks: $85.00 -SOLD
14. Proportioning Valve “L” Bracket $15.00 - SOLD
15. Transfer Case shifter $40.00-SOLD
16. Blazer Emblems: $20.00 pair-SOLD
17. Windshield Frame: $100.00-SOLD

19. Rolling chassis: $150.00

21. Front Clip Complete: $300.00-SOLD
22. 3 speed tranny: $100.00
23. Transfer Case: $100.00 -SOLD-Pending Payment

29. Taillights: $20.00 pair

32. Rear seat bolt down plates: $30.00
33. Fuel filler neck: 45.00
34. Front drive shaft: $40.00
35. Rear drive shaft: $40.00
36. Firewall: $150.00
37. Double Wall Top- minus hatch $200.00

39. Complete 307 SBC: Runs $250.00
40. Factory AM Radio: $30.00- SOLD
41. Non A/C Dash with un-cut radio hole $90.00
42. Complete Instrument Cluster: $40.00-SOLD
43. Ashtray $20.00
44. Glove Compartment Door: $40.00-SOLD-pending payment
45. Backup lights: $10.00
46. Rear Bumper brackets: $25.00-SOLD
47. Front Bumper brackets: $25.00-SOLD
48. Radiator: $40.00-SOLD
49. Radiator Shroud: $30.00-SOLD PENDING PAYMENT

51. Marker lights: $15.00 for all four

53. Heater box with hoses: $40.00
54. Non-tilt 3 speed column: $50.00
55. Rear view mirror: $10.00
56. Rear top hold down brackets: $25.00-SOLD
57. Clutch pedal assembly: $20.00
58. Brake pedal assembly : $25.00
59. Gas pedal assembly: $15.00
60. Transmission "High" Hump: $40.00-SOLD
60. Gas tank - SOLD-pending payment

















both sides available




[IMG]
[/IMG]























__________________
Jeff
1972 Blazer CST 2wd- My son Sam's Project "S" Project "S"
1970 Suburban - SOLD "One Bad Burb" Photobucket Album
1986 C30 Crewcab - 63K original miles, original paint


Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

Last edited by jeffg1010; 02-11-2012 at 02:41 PM.
jeffg1010 is offline   Reply With Quote
Old 12-26-2011, 06:33 PM   #2
47thriftmaster
Registered User
 
47thriftmaster's Avatar
 
Join Date: Sep 2010
Location: UP, Washington
Posts: 978
Re: Parting a complete 1971 Blazer 4x4

Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks
47thriftmaster is offline   Reply With Quote
Old 12-26-2011, 06:35 PM   #3
47thriftmaster
Registered User
 
47thriftmaster's Avatar
 
Join Date: Sep 2010
Location: UP, Washington
Posts: 978
Re: Parting a complete 1971 Blazer 4x4

May also be interested in the doors, pending pics of the ruff areas and price. I'll take all I mentioned pending pricing and pics

Last edited by 47thriftmaster; 12-26-2011 at 08:44 PM. Reason: Forgot the magic words
47thriftmaster is offline   Reply With Quote
Old 12-26-2011, 08:15 PM   #4
teeitup
Just like to part out trucks!!
 
teeitup's Avatar
 
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
Re: Parting a complete 1971 Blazer 4x4

Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD
72 blazer 4x4 4 speed Cheyenne
72 GMC swb 4x4 fleet 4 speed, original paint
1958 Cameo (one of 1405 built, it was my dads)
2020 chevy Apex 4x4 crew cab
1969 Z28 with the 302
1980 chevy swb 4x4
1964 chevell Malibu SS
1976 K20, sold new originally out of my dads chevy dealership


Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"
teeitup is offline   Reply With Quote
Old 12-26-2011, 08:42 PM   #5
rockc
Registered User
 
Join Date: Jul 2007
Location: SE WY
Posts: 640
Re: Parting a complete 1971 Blazer 4x4

I would be interested in front and rear carpet hold downs.
__________________
72 chevy 3/4 ton 4X4
rockc is offline   Reply With Quote
Old 12-26-2011, 08:47 PM   #6
CORSAIR
Registered User
 
CORSAIR's Avatar
 
Join Date: Dec 2010
Location: Pahrump, Nevada
Posts: 451
Re: Parting a complete 1971 Blazer 4x4

Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred
__________________
"The Can't Family Lives Across The Street"
CORSAIR is offline   Reply With Quote
Old 12-26-2011, 08:50 PM   #7
WETOWM
Senior Member
 
Join Date: Jun 2011
Location: ST LOUIS MO
Posts: 2,114
Re: Parting a complete 1971 Blazer 4x4

Put me 2nd in line for the upper radiator hoses & tube
WETOWM is offline   Reply With Quote
Old 12-27-2011, 05:29 AM   #8
gmclonghorn
Registered User
 
gmclonghorn's Avatar
 
Join Date: Mar 2011
Location: Westminster, Ca
Posts: 1,104
Re: Parting a complete 1971 Blazer 4x4

Put me down 2nd for the carpet strips. Thanks
Posted via Mobile Device
gmclonghorn is offline   Reply With Quote
Old 12-27-2011, 08:20 AM   #9
rsavage
Registered User
 
rsavage's Avatar
 
Join Date: Aug 2009
Location: Alden NY
Posts: 2,705
Re: Parting a complete 1971 Blazer 4x4

I'll be 2nd in line for the underdash radio speaker/brackets if it is an original one. Thanks, Rick.
__________________
1961 C1 Corvette
1959 El Camino 350 TPI, 9" 4 w disc
69 Blazer K5 - sold July '20
2021 Durango RT 5.7
rsavage is offline   Reply With Quote
Old 12-27-2011, 08:24 AM   #10
72GMCK-2500
Registered User
 
72GMCK-2500's Avatar
 
Join Date: Feb 2011
Location: West Chester Pa.
Posts: 195
Re: Parting a complete 1971 Blazer 4x4

Does the E-Brake still work? How are the cables? Im interested!
__________________
1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride)
1965 GMC 1000 305E V6, Powerglide. GONE
1972 GMC K-2500 350, 4 speed, 229,000 miles
1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4.
1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel.
RUST NEVER SLEEPS
72GMCK-2500 is offline   Reply With Quote
Old 12-27-2011, 09:18 AM   #11
blazin71K5
Registered User
 
blazin71K5's Avatar
 
Join Date: Aug 2009
Location: Cash,TX
Posts: 285
Re: Parting a complete 1971 Blazer 4x4

If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks
__________________
71 2wd k5
67 Nova
blazin71K5 is offline   Reply With Quote
Old 12-27-2011, 02:13 PM   #12
LUCKTRUCK
Senior Member
 
LUCKTRUCK's Avatar
 
Join Date: May 2007
Location: new jersey
Posts: 610
Re: Parting a complete 1971 Blazer 4x4

How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.
__________________
LUCKTRUCK

LUCKTRUCK is offline   Reply With Quote
Old 12-27-2011, 05:05 PM   #13
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,764
Re: Parting a complete 1971 Blazer 4x4

T case knob and blazer emblems?
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 12-27-2011, 05:12 PM   #14
Gary 70 Jimmy
Senior Member

 
Gary 70 Jimmy's Avatar
 
Join Date: Jan 2002
Location: Burghill, Ohio 44404
Posts: 3,402
Re: Parting a complete 1971 Blazer 4x4

put me in line for the speaker under the dash
__________________

1972 GMC Jimmy 1/2 4X4 4wheel camper
1970 GMC Jimmy 1/2 4X4 350
1969 Chevy Blazer 1/2 4X4 307
1967 chevy LWB 3/4 396
Gary 70 Jimmy is offline   Reply With Quote
Old 12-27-2011, 06:15 PM   #15
68panelman
Registered User
 
68panelman's Avatar
 
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,455
Re: Parting a complete 1971 Blazer 4x4

Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike
68panelman is offline   Reply With Quote
Old 12-27-2011, 09:43 PM   #16
68lowburb
Registered User
 
68lowburb's Avatar
 
Join Date: Sep 2006
Location: prairieville, louisiana
Posts: 883
Re: Parting a complete 1971 Blazer 4x4

inline for rear bumper and doors pending pics and price thanks jimmy
68lowburb is offline   Reply With Quote
Old 12-27-2011, 10:48 PM   #17
jeffg1010
Registered User
 
jeffg1010's Avatar
 
Join Date: Aug 2010
Location: Mooresville, NC
Posts: 2,675
Re: Parting a complete 1971 Blazer 4x4

I've posted some pricing. I will not be able to start tearing into this thing until next week, so hopefully you are not in a rush.
__________________
Jeff
1972 Blazer CST 2wd- My son Sam's Project "S" Project "S"
1970 Suburban - SOLD "One Bad Burb" Photobucket Album
1986 C30 Crewcab - 63K original miles, original paint


Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...
jeffg1010 is offline   Reply With Quote
Old 12-27-2011, 11:07 PM   #18
jeffg1010
Registered User
 
jeffg1010's Avatar
 
Join Date: Aug 2010
Location: Mooresville, NC
Posts: 2,675
Re: Parting a complete 1971 Blazer 4x4

Quote:
Originally Posted by 47thriftmaster View Post
Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks
I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.

Quote:
Originally Posted by teeitup View Post
Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy
How about $45 shipped. I will have to get you a better pic and confirm it's condition.

Quote:
Originally Posted by rockc View Post
I would be interested in front and rear carpet hold downs.
I will have to make sure they are there

Quote:
Originally Posted by CORSAIR View Post
Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred
How about $50 shipped?

Quote:
Originally Posted by 72GMCK-2500 View Post
Does the E-Brake still work? How are the cables? Im interested!
I will check, but I would like to sell the rolling chassis complete, I will let you know.

Quote:
Originally Posted by blazin71K5 View Post
If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks
I will get you pics of these and we will determine pricing from there.


Quote:
Originally Posted by LUCKTRUCK View Post
How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.
How about $20 shipped?

Quote:
Originally Posted by too much stuff View Post
T case knob and blazer emblems?
How about $40 shipped?

Quote:
Originally Posted by 68panelman View Post
Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike
I will see if they are there and get you a pic
__________________
Jeff
1972 Blazer CST 2wd- My son Sam's Project "S" Project "S"
1970 Suburban - SOLD "One Bad Burb" Photobucket Album
1986 C30 Crewcab - 63K original miles, original paint


Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...
jeffg1010 is offline   Reply With Quote
Old 12-27-2011, 11:35 PM   #19
47thriftmaster
Registered User
 
47thriftmaster's Avatar
 
Join Date: Sep 2010
Location: UP, Washington
Posts: 978
Re: Parting a complete 1971 Blazer 4x4

I will take the bumpers, just let me know when your ready. No problem on the other stuff, just let me know. For the doors I will wait on the pictures. Would also be interested in the core support, pending pictures. If you plan to do the tear down here in NC, let me know maybe I could come help you.

Quote:
Originally Posted by jeffg1010 View Post
I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.

Last edited by 47thriftmaster; 12-30-2011 at 01:24 AM. Reason: Removed a question about brakets, was answered in add
47thriftmaster is offline   Reply With Quote
Old 12-27-2011, 11:36 PM   #20
teeitup
Just like to part out trucks!!
 
teeitup's Avatar
 
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
Re: Parting a complete 1971 Blazer 4x4

Jeff, I'll take the upper radiator tube with both hoses for sure. I'll wait for pics of speaker and bracket. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD
72 blazer 4x4 4 speed Cheyenne
72 GMC swb 4x4 fleet 4 speed, original paint
1958 Cameo (one of 1405 built, it was my dads)
2020 chevy Apex 4x4 crew cab
1969 Z28 with the 302
1980 chevy swb 4x4
1964 chevell Malibu SS
1976 K20, sold new originally out of my dads chevy dealership


Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"
teeitup is offline   Reply With Quote
Old 12-28-2011, 12:28 AM   #21
LUCKTRUCK
Senior Member
 
LUCKTRUCK's Avatar
 
Join Date: May 2007
Location: new jersey
Posts: 610
Re: Parting a complete 1971 Blazer 4x4

$20. sounds good for the prop. valve bracket.

I'll take it. Please send me your payment info.
__________________
LUCKTRUCK

LUCKTRUCK is offline   Reply With Quote
Old 12-28-2011, 12:30 AM   #22
botmfedr1
Registered User
 
botmfedr1's Avatar
 
Join Date: Feb 2008
Location: Harlingen, TX
Posts: 1,096
Re: Parting a complete 1971 Blazer 4x4

Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs.

shipping to 79908. please send me pics via text if possible (253-495-0880)

thanks,
Mondo
botmfedr1 is offline   Reply With Quote
Old 12-28-2011, 01:51 AM   #23
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,764
Re: Parting a complete 1971 Blazer 4x4

That sounds fine on the t case knob and emblems. Let me know when they are off and overall condition. Thanks, Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 12-28-2011, 02:24 AM   #24
72blazr
Registered User
 
72blazr's Avatar
 
Join Date: Nov 2011
Location: Houston Texas
Posts: 120
Re: Parting a complete 1971 Blazer 4x4

Interested in the bolt down plates #32 pending pic. Are those prices shipped??
72blazr is offline   Reply With Quote
Old 12-28-2011, 03:15 AM   #25
c1069
Registered User
 
c1069's Avatar
 
Join Date: Apr 2010
Location: McFarland CA
Posts: 1,392
Re: Parting a complete 1971 Blazer 4x4

its a 4 core radiator? Or?
__________________
Pancho

69 c/10 step side 454/400 with 3.07
c1069 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com