My build thread.. 63 LS powered C10

[Super73]

bcdeutsch731,

The lower sill bar needs to connect the bottom of the A-pillar bar and main hoop together. Being the main hoop does not go bellow the cab, it would be hard to run it under the cab. Also not sure the legality regarding distance from the diagnal door bar.

There does not have to have an X in the door, just needs to be a diagnal, but an X is more on the safe side. I am nimble enough to get in/out.



Thanks all for the compliments.

Most likely going to pull the motor on sunday, get the heads off and to their new owner. Then order the new ones with gaskets, put it all back together ASAP.

Come on 10.5x ET NA... I don't think it will happen first time out but sure would be nice.