""First look At Black Ice"" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Pardue'sCustoms* · 08-27-2003, 07:44 PM

here is the frame comeing togther

*Pardue'sCustoms* · 08-27-2003, 07:45 PM

pic.2 new ss lines and new grade 8 bolts

FRENCHBLUE72 · 08-27-2003, 07:48 PM

nice frame can't wait to see the rest of it..

*Pardue'sCustoms* · 08-27-2003, 07:54 PM

pic.3

Piper71c10 · 08-27-2003, 08:28 PM

nicely done! what are ya putting on top of that beauty?
piper!

**old Rusty C10** · 08-27-2003, 08:29 PM

lookin good black ice sounds slippery!!

*Pardue'sCustoms* · 08-27-2003, 09:09 PM

This is how it looked when he brought it to me. 1972 chevy cheynne swb. The last guy did a lot of bad body work it was starting to crack and he just would lay a pice of metal over rust and pop rivet it and lay the filler to it and called it done and water went in the rust hole from behind it and cause the bonda to turn loose. CAG17 is going to have a show stooper all the frame and suspension and drive shaft and coil springs and inner fenders and hood hinges and tailgate lacthes , trunnion's and hinges and rad support and carrer bear bracket and the rotor's and drums and battery tray and bumper brackets motor mounts rear end and backing plates , sway bar, washer jar brackets you get the pic. thanks for the replays

http://www.bowtieclubofthecarolinas....s/CAG92802.jpg

*Pardue'sCustoms* · 08-27-2003, 09:12 PM

*Randy70C-10* · 08-27-2003, 09:12 PM

You're the right man for the job.

Hey, hows Daves truck coming along?

*Pardue'sCustoms* · 08-27-2003, 09:29 PM

should be done sept 15 ill take pic. of it torrom

*Pardue'sCustoms* · 08-27-2003, 09:30 PM

pic4

cag17 · 08-27-2003, 09:58 PM

I just want to say that I have seen what bad body work can do and if any of you need body work done, call Tony. He is the best body man that I have seen in some time and I trust him with anything that I own, obviously.

I hope that you all like that start of BlackIce. More pics to come.

MAVIS · 08-29-2003, 05:07 PM

SWEET

anthony_1269 · 08-29-2003, 05:19 PM

Looks Awesome! Keep up the good work!

griesel72 · 08-29-2003, 05:23 PM

nice frame. Gonna be a nice one. ga17 is gonna have a nice ride

MrShelley · 08-30-2003, 12:04 PM

This may be a stupid question, but where did you get those gold-iridated Grade 8 bolts on the frame? I'd like to use something like that when I put my frame back together.

*Pardue'sCustoms* · 08-30-2003, 09:28 PM

at my local hardware store

SEVEND2 · 08-31-2003, 06:16 AM

very very sweet ride, any before pics?

Pardue's Custom's & Restoration

^^^^DAM I wish you where so much closer

08-27-2003, 07:44 PM	#1
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	""First look At Black Ice"" here is the frame comeing togther Attached Images

08-27-2003, 07:45 PM	#2
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	pic.2 new ss lines and new grade 8 bolts Attached Images

08-27-2003, 07:48 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	nice frame can't wait to see the rest of it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-27-2003, 07:54 PM	#4
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	pic.3 Attached Images

08-27-2003, 08:29 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	lookin good black ice sounds slippery!! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-27-2003, 08:28 PM	#5
Piper71c10 Unending Project Join Date: Aug 2003 Location: Sequim, WA Posts: 337	nicely done! what are ya putting on top of that beauty? piper!

08-27-2003, 09:09 PM	#7
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	This is how it looked when he brought it to me. 1972 chevy cheynne swb. The last guy did a lot of bad body work it was starting to crack and he just would lay a pice of metal over rust and pop rivet it and lay the filler to it and called it done and water went in the rust hole from behind it and cause the bonda to turn loose. CAG17 is going to have a show stooper all the frame and suspension and drive shaft and coil springs and inner fenders and hood hinges and tailgate lacthes , trunnion's and hinges and rad support and carrer bear bracket and the rotor's and drums and battery tray and bumper brackets motor mounts rear end and backing plates , sway bar, washer jar brackets you get the pic. thanks for the replays http://www.bowtieclubofthecarolinas....s/CAG92802.jpg

08-27-2003, 09:12 PM	#8
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618

08-27-2003, 09:12 PM	#9
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	You're the right man for the job. Hey, hows Daves truck coming along?

08-27-2003, 09:29 PM	#10
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	should be done sept 15 ill take pic. of it torrom

08-27-2003, 09:30 PM	#11
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	pic4 Attached Images

08-27-2003, 09:58 PM	#12
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	I just want to say that I have seen what bad body work can do and if any of you need body work done, call Tony. He is the best body man that I have seen in some time and I trust him with anything that I own, obviously. I hope that you all like that start of BlackIce. More pics to come.

08-29-2003, 05:07 PM	#13
MAVIS Registered User Join Date: Aug 2003 Location: DRAPER, UTAH Posts: 4	SWEET

08-29-2003, 05:19 PM	#14
anthony_1269 Registered User Join Date: Sep 2002 Location: Texas Posts: 108	Looks Awesome! Keep up the good work! __________________ 1971 Chevy Longbed Fleetside Chevrolet All The Way!

08-29-2003, 05:23 PM	#15
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	nice frame. Gonna be a nice one. ga17 is gonna have a nice ride __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife



Register or Log In To remove these advertisements.

08-30-2003, 12:04 PM	#16
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	This may be a stupid question, but where did you get those gold-iridated Grade 8 bolts on the frame? I'd like to use something like that when I put my frame back together.

08-30-2003, 09:28 PM	#17
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	at my local hardware store

08-31-2003, 06:16 AM	#18
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,146	very very sweet ride, any before pics? Pardue's Custom's & Restoration ^^^^DAM I wish you where so much closer __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

Register or Log In To remove these advertisements.