1967 GMC with Buddy Buckets on CL Seattle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MusicMan70** · 12-30-2011, 07:26 PM

Looks like a good price to me...

http://seattle.craigslist.org/tac/cto/2761839776.html

Leroy-B1 · 12-30-2011, 08:11 PM

that is nice seat looks to be in excellent shape

**too much stuff** · 12-30-2011, 08:15 PM

Looks like a nice truck for the money. It is a 68 and 327 didn't have a 4 bolt main, but otherwise...

shawno72 · 12-30-2011, 08:37 PM

Sweet deal

**fine69** · 12-30-2011, 09:34 PM

Well worth that money.

**Already Gone** · 12-30-2011, 09:58 PM

There is a super deal for someone. When these pop up on here I often wonder where the guys are that ask on the boards ,how do I find a decent truck at at a decent price. This is a great starter truck for someone.
Posted via Mobile Device

**fine69** · 12-30-2011, 10:00 PM

Quote:

Originally Posted by Already Gone

There is a super deal for someone. When these pop up on here I often wonder where the guys are that ask on the boards ,how do I find a decent truck at at a decent price. This is a great starter truck for someone.
Posted via Mobile Device

I think they hide. It is one thing to jump on here and say your looking for a nice truck. It is totally another to actually have money to buy one.

Leroy-B1 · 12-30-2011, 10:20 PM

does it have cruise on it looks like something is going on the left side of the column

patrickth · 12-30-2011, 10:48 PM

Quote:

Originally Posted by fine69

I think they hide. It is one thing to jump on here and say your looking for a nice truck. It is totally another to actually have money to buy one.

You might be right, but I know for a fact things also get bought off these ads and not mentioned in a timely manner. I would be all over that truck right now if I didn't already have 3 and an appointment in the morning to look at a 72 I have been chasing for a month.

If I get it, the next ad you might see on CL will be one of mine :-)

I haven't had one for two weeks and already thinking I will flip it. It was a C.L from a machine shop, totally gone through 1978 K20 Bonanza. They went through rear end, transfer case and TH350 with and complete engine receipts.

They even delivered it 3 hrs north of them for purchase price. I have $575 into as it sits.

Need to hook up power steering, drain 30 gallons of old nasty gas out of it , but lots of good deals on C.L. right now.

gysgtc · 12-31-2011, 06:19 AM

You west coast guys have all the deals. If it was on the east coast I would buy it in a heart beat. Long trip from Seattle to Buffalo.

67chevy1series · 12-31-2011, 06:24 AM

cool truck its just interesting to see that 67 came with marker lights.

**special-K** · 12-31-2011, 08:20 AM

Yep,that '67 looks an awful lot like a '68

. That 327 should be a 4-bolt large journal 010 block. I can't tell in the picture,but I think that's an aftermarket cruise control,although it was an option in '68 from the factory. That's an amazing deal. I suspect some flipper already snatched that up and scheming to better than double his money. Athough,it would be mice to think a person who truly loves a good truck got it for a steal.

HavinSomeFun · 12-31-2011, 10:33 AM

Love to have that one. Talk about opposite ends of the world..

patrickth · 12-31-2011, 10:44 AM

Here is another just found here in town.

http://bellingham.craigslist.org/cto/2770324665.html

**special-K** · 12-31-2011, 10:50 AM

Quote:

Originally Posted by patrickth

Here is another just found here in town.

http://bellingham.craigslist.org/cto/2770324665.html

Yep,another square body for cheap. That's a common sight. No disrespect to square bodies,but they are another ball game. This GMC is a highly optioned desirable year truck that is not commonly found and at a very reasonable price.

patrickth · 12-31-2011, 11:03 AM

Quote:

Originally Posted by special-K

Yep,another square body for cheap. That's a common sight. No disrespect to square bodies,but they are another ball game. This GMC is a highly optioned desirable year truck that is not commonly found and at a very reasonable price.

I get your point, but doesn't matter what they are, no jobs and everyone is dumping to fight another day.

**leddzepp** · 12-31-2011, 11:08 AM

Quote:

Originally Posted by fine69

I think they hide. It is one thing to jump on here and say your looking for a nice truck. It is totally another to actually have money to buy one.

I agree 100%

bmfm64 · 12-31-2011, 01:17 PM

Quote:

Originally Posted by patrickth

You might be right, but I know for a fact things also get bought off these ads and not mentioned in a timely manner. I would be all over that truck right now if I didn't already have 3 and an appointment in the morning to look at a 72 I have been chasing for a month.

If I get it, the next ad you might see on CL will be one of mine :-)

I haven't had one for two weeks and already thinking I will flip it. It was a C.L from a machine shop, totally gone through 1978 K20 Bonanza. They went through rear end, transfer case and TH350 with and complete engine receipts.

They even delivered it 3 hrs north of them for purchase price. I have $575 into as it sits.

Need to hook up power steering, drain 30 gallons of old nasty gas out of it , but lots of good deals on C.L. right now.

PM what your thoughts are on this.... I could make Bham in the morning for the right price.

**Classic Heartbeat** · 12-31-2011, 02:52 PM

I have been out to look at the 68. It is not as nice as it appears. It does have some rust issues that need addressing and the owner backed it into something on the right rear. Dented it right in the hard spot to fix. It also needs a new core support, right fender, inner fenders, front floor supports, rockers, cab corners, floor sections and kick panels. The driver's side bucket seat is torn, and someone mounted the spair tank switch in the seat brackets. Also didn't hear it run. It is definetly a good cantidate for restoration, just not worth the dough IMO. WES

patrickth · 12-31-2011, 03:01 PM

Quote:

Originally Posted by bmfm64

PM what your thoughts are on this.... I could make Bham in the morning for the right price.

I sent you a PM. I hope yoiu didn't take that to mean I was going to sell it for that price. I need to build me a tow rig, one way or another.

bmfm64 · 12-31-2011, 03:05 PM

Quote:

Originally Posted by patrickth

I sent you a PM. I hope yoiu didn't take that to mean I was going to sell it for that price. I need to build me a tow rig, one way or another.

I got no PM's... I did get a visitor message but no price....

**LockDoc** · 12-31-2011, 03:18 PM

Quote:

Originally Posted by Classic Heartbeat

I have been out to look at the 68. It is not as nice as it appears. It does have some rust issues that need addressing and the owner backed it into something on the right rear. Dented it right in the hard spot to fix. It also needs a new core support, right fender, inner fenders, front floor supports, rockers, cab corners, floor sections and kick panels. The driver's side bucket seat is torn, and someone mounted the spair tank switch in the seat brackets. Also didn't hear it run. It is definetly a good cantidate for restoration, just not worth the dough IMO. WES

That is exactly why you don't buy them sight unseen, no matter how good they look in the pictures...

LockDoc

**mr48chev** · 12-31-2011, 04:15 PM

Quote:

Originally Posted by LockDoc

That is exactly why you don't buy them sight unseen, no matter how good they look in the pictures...

LockDoc

Yep, and Wes knows these trucks and what it takes to fix then as well as anyone on the board. Still we do see some decent prices on these trucks in the PNW as they are still being used daily by a lot of people who don't view them as "classics" and just feel that they are good solid old work trucks.

**special-K** · 12-31-2011, 05:59 PM

I figured it had some rust repair needed,but that rear corner damage sucks. To an East Coaster a Super Custom '68 that decent is still worth the money + a bit for transporting back. I would want it a bit nicer to go through that,though,even if that meant the truck was twice as much to start with.

patrickth · 12-31-2011, 10:23 PM

Quote:

Originally Posted by bmfm64

I got no PM's... I did get a visitor message but no price....

I did buy the 72 Custom today, mainly because I would rather put the time and money into that rather than a newer one and it is in excellent condition to drive as is once I put a different set of tires on it.

I am going to keep the other two for a couple weeks til I can do a compression check, isolate some numbers and get a good handle on anything I might need.

12-30-2011, 07:26 PM	#1
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,851	1967 GMC with Buddy Buckets on CL Seattle Looks like a good price to me... http://seattle.craigslist.org/tac/cto/2761839776.html __________________ MusicMan70 1961 GMC Suburban

12-30-2011, 08:11 PM	#2
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,995	Re: 1967 GMC with Buddy Buckets on CL Seattle that is nice seat looks to be in excellent shape

12-30-2011, 08:15 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: 1967 GMC with Buddy Buckets on CL Seattle Looks like a nice truck for the money. It is a 68 and 327 didn't have a 4 bolt main, but otherwise... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-30-2011, 08:37 PM	#4
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: 1967 GMC with Buddy Buckets on CL Seattle Sweet deal __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-30-2011, 09:34 PM	#5
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: 1967 GMC with Buddy Buckets on CL Seattle Well worth that money. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

12-30-2011, 09:58 PM	#6
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,161	Re: 1967 GMC with Buddy Buckets on CL Seattle There is a super deal for someone. When these pop up on here I often wonder where the guys are that ask on the boards ,how do I find a decent truck at at a decent price. This is a great starter truck for someone. Posted via Mobile Device __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

12-30-2011, 10:20 PM	#8
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,995	Re: 1967 GMC with Buddy Buckets on CL Seattle does it have cruise on it looks like something is going on the left side of the column

12-31-2011, 06:19 AM	#10
gysgtc Registered User Join Date: Apr 2010 Location: Sutton, WV Posts: 340	Re: 1967 GMC with Buddy Buckets on CL Seattle You west coast guys have all the deals. If it was on the east coast I would buy it in a heart beat. Long trip from Seattle to Buffalo.

12-31-2011, 06:24 AM	#11
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 GMC with Buddy Buckets on CL Seattle cool truck its just interesting to see that 67 came with marker lights.

12-31-2011, 08:20 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1967 GMC with Buddy Buckets on CL Seattle Yep,that '67 looks an awful lot like a '68 . That 327 should be a 4-bolt large journal 010 block. I can't tell in the picture,but I think that's an aftermarket cruise control,although it was an option in '68 from the factory. That's an amazing deal. I suspect some flipper already snatched that up and scheming to better than double his money. Athough,it would be mice to think a person who truly loves a good truck got it for a steal. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 12-31-2011 at 08:45 AM.

12-31-2011, 10:33 AM	#13
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: 1967 GMC with Buddy Buckets on CL Seattle Love to have that one. Talk about opposite ends of the world.. __________________ a green one with some stuff done to it....

12-31-2011, 10:44 AM	#14
patrickth Registered User Join Date: Nov 2011 Location: Bellingham, WA Posts: 72	Re: 1967 GMC with Buddy Buckets on CL Seattle Here is another just found here in town. http://bellingham.craigslist.org/cto/2770324665.html

12-31-2011, 02:52 PM	#19
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: 1967 GMC with Buddy Buckets on CL Seattle I have been out to look at the 68. It is not as nice as it appears. It does have some rust issues that need addressing and the owner backed it into something on the right rear. Dented it right in the hard spot to fix. It also needs a new core support, right fender, inner fenders, front floor supports, rockers, cab corners, floor sections and kick panels. The driver's side bucket seat is torn, and someone mounted the spair tank switch in the seat brackets. Also didn't hear it run. It is definetly a good cantidate for restoration, just not worth the dough IMO. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-31-2011, 05:59 PM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1967 GMC with Buddy Buckets on CL Seattle I figured it had some rust repair needed,but that rear corner damage sucks. To an East Coaster a Super Custom '68 that decent is still worth the money + a bit for transporting back. I would want it a bit nicer to go through that,though,even if that meant the truck was twice as much to start with. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.