Need help finding correct carpet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Caudillo64 · 12-29-2011, 11:44 PM

I bought a 1965 Chevy C10 with no engine and it had a 350 sitting in it. So my question is how can I find out which carpet to buy. They sell 3 speed/ automatic low hump and 4 speed hi hump. I would appericate any help. Thanks

Max1775 · 12-30-2011, 12:31 AM

I'd go Brazilian! That way you don't ever have to worry about it...��

JK. You need to figure out I'd you have a low or high hump cab. Can you take a side picture of the tranny hump in your truck and post it?
Posted via Mobile Device

markeb01 · 12-30-2011, 02:36 AM

Here are a few pictures I pulled off the net that should make identification a little easier. A high hump pan is almost square in the center, rises up in front of the seat, and is always removable:

The low hump drops in front of the seat, may be removable or may be a permanent part of the floor.

blackdawg · 12-30-2011, 12:44 PM

I would try lmc truck.carpets for high hump and low hump.There is a free catolog with lots of nice afteramarket items.just my two cents.

1963c-10 · 12-30-2011, 02:38 PM

Ordered my carpet from LMC. Nice fit

**joedoh** · 12-30-2011, 10:01 PM

90% of the time you will have a low hump, high humps are USUALLY (I said usually) for 4 spd or 4x4 trucks.

I like accmats, they always carry a bunch of pile and color options and arent too bad on price.

http://www.stockinteriors.com/AutoCa...=31&ModelId=88

also, CALL THEM. because if you want anything special, like a couple inches extra carpet on any edge to say cover to the back wall if you moved your tank, or cover the forward part of your vintage air, they will do it for a reasonable price. I have a weird floorboard, it is mostly an S10 floor with 7 inches added to each side to meet the 65 rockers, accmats will sell me a carpet with those 7 inches added to each side. Not that everyone needs that kind of weird request fulfilled but it sure is nice that they will do it.

Caudillo64 · 12-30-2011, 11:46 PM

Thanks for all input. Mine is a low hump. Know I just need to comapre and price.

bama63 · 12-31-2011, 03:22 PM

or here http://www.accmats.com/Commerce/Search.aspx direct from manufacture a little more pricey but 100% American made in anniston alabama perfect fit and a great carpet

**joedoh** · 12-31-2011, 04:24 PM

Quote:

Originally Posted by bama63

or here http://www.accmats.com/Commerce/Search.aspx direct from manufacture a little more pricey but 100% American made in anniston alabama perfect fit and a great carpet

Woops that's the company I meant, that other company I posted is what pops up with a google search for accmats. Acc is a great company.
Posted via Mobile Device

dthela · 01-01-2012, 09:57 AM

got mine for $159 on ebay and since i have a burb i bought spare roll for back. Carpet fit mould perfectly and looks great. jute backing.

12-29-2011, 11:44 PM	#1
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Need help finding correct carpet I bought a 1965 Chevy C10 with no engine and it had a 350 sitting in it. So my question is how can I find out which carpet to buy. They sell 3 speed/ automatic low hump and 4 speed hi hump. I would appericate any help. Thanks

12-30-2011, 12:31 AM	#2
Max1775 Registered User Join Date: Mar 2011 Location: Bandera, Texas Posts: 251	Re: Need help finding correct carpet I'd go Brazilian! That way you don't ever have to worry about it...�� JK. You need to figure out I'd you have a low or high hump cab. Can you take a side picture of the tranny hump in your truck and post it? Posted via Mobile Device

12-30-2011, 02:36 AM	#3
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Need help finding correct carpet Here are a few pictures I pulled off the net that should make identification a little easier. A high hump pan is almost square in the center, rises up in front of the seat, and is always removable: The low hump drops in front of the seat, may be removable or may be a permanent part of the floor.

12-30-2011, 12:44 PM	#4
blackdawg Blackdawg Join Date: Aug 2010 Location: North Delta ,British Columbia Posts: 213	Re: Need help finding correct carpet I would try lmc truck.carpets for high hump and low hump.There is a free catolog with lots of nice afteramarket items.just my two cents. __________________ LIFE NEEDS NO RED LIGHTS !! 1966 chevy stepside. Aka Bella. 1998 chevy s-10 4x4 daily driver. my build thread http://67-72chevytrucks.com/vboard/s...d.php?t=467164

12-30-2011, 02:38 PM	#5
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Need help finding correct carpet Ordered my carpet from LMC. Nice fit __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

12-30-2011, 10:01 PM	#6
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,761	Re: Need help finding correct carpet 90% of the time you will have a low hump, high humps are USUALLY (I said usually) for 4 spd or 4x4 trucks. I like accmats, they always carry a bunch of pile and color options and arent too bad on price. http://www.stockinteriors.com/AutoCa...=31&ModelId=88 also, CALL THEM. because if you want anything special, like a couple inches extra carpet on any edge to say cover to the back wall if you moved your tank, or cover the forward part of your vintage air, they will do it for a reasonable price. I have a weird floorboard, it is mostly an S10 floor with 7 inches added to each side to meet the 65 rockers, accmats will sell me a carpet with those 7 inches added to each side. Not that everyone needs that kind of weird request fulfilled but it sure is nice that they will do it. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

12-30-2011, 11:46 PM	#7
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: Need help finding correct carpet Thanks for all input. Mine is a low hump. Know I just need to comapre and price.

12-31-2011, 03:22 PM	#8
bama63 Registered User Join Date: Jun 2010 Location: gadsden, alabama Posts: 468	Re: Need help finding correct carpet or here http://www.accmats.com/Commerce/Search.aspx direct from manufacture a little more pricey but 100% American made in anniston alabama perfect fit and a great carpet __________________ Due to financial constraints, the light at the end of the tunnel will be shut off until further notice

01-01-2012, 09:57 AM	#10
dthela Registered User Join Date: Jul 2011 Location: N Kingstown, R.I. Posts: 305	Re: Need help finding correct carpet got mine for $159 on ebay and since i have a burb i bought spare roll for back. Carpet fit mould perfectly and looks great. jute backing.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.