What did you do ?new brake master cyl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JumboAMONGus · 01-02-2012, 08:25 PM

yeah cause i went to refill it and its a pain using a funnel with a hose on it under the seat ,,

OrrieG · 01-03-2012, 12:59 AM

I built my own brake MC/booster bracket and moved it back so the top clears the first raised cross brace. I then made a door above the MC lid. I fabbed my seat brackets so the original tilt feature works to gain access to the door and other stuff I will have under the seats (stereo stuff). If your seats are fixed then it will be a challenge, and a remote fill set up might be the way to go. I would be worried about the line cracking or breaking and compromising the brake system.

01-02-2012, 08:25 PM	#1
JumboAMONGus Registered User Join Date: Jun 2010 Location: WA. Posts: 436	Re: What did you do ?new brake master cyl yeah cause i went to refill it and its a pain using a funnel with a hose on it under the seat ,,

01-03-2012, 12:59 AM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What did you do ?new brake master cyl I built my own brake MC/booster bracket and moved it back so the top clears the first raised cross brace. I then made a door above the MC lid. I fabbed my seat brackets so the original tilt feature works to gain access to the door and other stuff I will have under the seats (stereo stuff). If your seats are fixed then it will be a challenge, and a remote fill set up might be the way to go. I would be worried about the line cracking or breaking and compromising the brake system. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.