WA Nice 80lb oil pressure gauges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 01-02-2012, 11:48 PM

Two nice 80lb oil pressure gauges, both have nice color, #1 is a little bit nicer than #2 which has very minor discoloration on the face (visible in pic) both still have original paint on the needles!

$55.00 each, shipped in the CONUS

scoyote · 01-03-2012, 12:57 AM

I'll take the best #1 ya got.
Paypal ok?

Livrat · 01-03-2012, 01:19 AM

paypal works.. sending PM.. #1 sold!!

Livrat · 01-06-2012, 12:16 PM

ttt

**jaros44sr** · 01-06-2012, 02:28 PM

would you consider a trade for a air gauge, with tin. very good shape

do you have any ammeter gauges?

Livrat · 01-06-2012, 11:08 PM

I may be interested in doing some trading if your air gauge is real nice (any pics?). do you have any tach/air lenses?
Is the tin for the air gauge with tach? or just with air?

I do have ammeter gauges, how nice would you like?

**jaros44sr** · 01-06-2012, 11:30 PM

Quote:

Originally Posted by Livrat

I may be interested in doing some trading if your air gauge is real nice (any pics?). do you have any tach/air lenses?
Is the tin for the air gauge with tach? or just with air?

I do have ammeter gauges, how nice would you like?

really, really nice, pics over the weekend. I had one lense that got broke in transit, clean diagonal break

the tin is for an oil pressure gauge and vacuum gauge, not a complete tin

depends on what i can afford on the ammeter gauge, can you give me an idea of prices

Livrat · 01-07-2012, 12:29 AM

Ahh... for some reason I was picturing the big inner tin and not the tin for the gauges themselves,
I'll dig through my amp gauges and post a pic of a nice one, How does $20 sound for one?

**jaros44sr** · 01-07-2012, 12:58 AM

Quote:

Originally Posted by Livrat

Ahh... for some reason I was picturing the big inner tin and not the tin for the gauges themselves,
I'll dig through my amp gauges and post a pic of a nice one, How does $20 sound for one?

yep, right in my price range...how can you test them to see if they work

Livrat · 01-07-2012, 04:42 PM

For testing I use a "AA" battery and a couple of jumper leads, hook the leads to the battery, then momentarily touch them to the posts on the gauge, if its good it will move toward either + or -.. then touch them in reverse and it should read opposite
Here is a picture of an extra one I have, it could use the needle resprayed

**jaros44sr** · 01-07-2012, 04:59 PM

Quote:

Originally Posted by Livrat

For testing I use a "AA" battery and a couple of jumper leads, hook the leads to the battery, then momentarily touch them to the posts on the gauge, if its good it will move toward either + or -.. then touch them in reverse and it should read opposite
Here is a picture of an extra one I have, it could use the needle resprayed

thanks for the tip, ill check mine out. if it doesnt work ill buy yours....i have 12.6 volts on the posts

have you started sanding the wifeys roof yet, didnt know the texture was molded in....are you sure she wants a smooth roof

Livrat · 01-07-2012, 05:09 PM

Sounds good,
Nope haven't started on the top yet. I did take a minute with a pocket knife and discovered the texture scrapes right off.. I think I will scrape most of it then sand to remove the rest, Yes she is determined to have it smooth. hmmmmmmmm.. maybe I should hand her the scraper??

**jaros44sr** · 01-07-2012, 11:23 PM

Quote:

Originally Posted by Livrat

Sounds good,
Nope haven't started on the top yet. I did take a minute with a pocket knife and discovered the texture scrapes right off.. I think I will scrape most of it then sand to remove the rest, Yes she is determined to have it smooth. hmmmmmmmm.. maybe I should hand her the scraper??

...ill try to get the pics of the gauge tomorrow

**jaros44sr** · 01-08-2012, 11:27 AM

sorry it took so long, had to learn how to download pics on my laptop

discoloration on tin, no rust. just dust on face, if you want to clean with windex and take another pic i will

Livrat · 01-08-2012, 01:52 PM

I'll make the trade if you like, I Could use an extra air gauge and am good on 80lb oil gauges
If your still up for it PM me your mailing address.
Thanks!!

01-03-2012, 01:19 AM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges paypal works.. sending PM.. #1 sold!! Last edited by Livrat; 01-03-2012 at 02:31 AM.

01-06-2012, 12:16 PM	#4
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges ttt

01-06-2012, 02:28 PM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,767	Re: Nice 80lb oil pressure gauges would you consider a trade for a air gauge, with tin. very good shape do you have any ammeter gauges? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-06-2012, 11:08 PM	#6
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges I may be interested in doing some trading if your air gauge is real nice (any pics?). do you have any tach/air lenses? Is the tin for the air gauge with tach? or just with air? I do have ammeter gauges, how nice would you like?

01-07-2012, 12:29 AM	#8
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges Ahh... for some reason I was picturing the big inner tin and not the tin for the gauges themselves, I'll dig through my amp gauges and post a pic of a nice one, How does $20 sound for one?

01-02-2012, 11:48 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Nice 80lb oil pressure gauges Two nice 80lb oil pressure gauges, both have nice color, #1 is a little bit nicer than #2 which has very minor discoloration on the face (visible in pic) both still have original paint on the needles! $55.00 each, shipped in the CONUS Attached Images Last edited by Livrat; 01-02-2012 at 11:58 PM.

01-03-2012, 12:57 AM	#2
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: Nice 80lb oil pressure gauges I'll take the best #1 ya got. Paypal ok? __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

01-07-2012, 04:42 PM	#10
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges For testing I use a "AA" battery and a couple of jumper leads, hook the leads to the battery, then momentarily touch them to the posts on the gauge, if its good it will move toward either + or -.. then touch them in reverse and it should read opposite Here is a picture of an extra one I have, it could use the needle resprayed Attached Images

01-07-2012, 05:09 PM	#12
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges Sounds good, Nope haven't started on the top yet. I did take a minute with a pocket knife and discovered the texture scrapes right off.. I think I will scrape most of it then sand to remove the rest, Yes she is determined to have it smooth. hmmmmmmmm.. maybe I should hand her the scraper??

01-08-2012, 11:27 AM	#14
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,767	Re: Nice 80lb oil pressure gauges sorry it took so long, had to learn how to download pics on my laptop discoloration on tin, no rust. just dust on face, if you want to clean with windex and take another pic i will __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-08-2012, 01:52 PM	#15
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Nice 80lb oil pressure gauges I'll make the trade if you like, I Could use an extra air gauge and am good on 80lb oil gauges If your still up for it PM me your mailing address. Thanks!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.