NJ WTB 2 barrel carb 2 jet rochester /with manuel choke - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**zicc1835** · 01-05-2012, 06:55 PM

[FONT="Arial B

jaros44sr · 01-05-2012, 09:51 PM

got one, but i dont think it has a manual choke...ill check tomorrow

**zicc1835** · 01-05-2012, 10:55 PM

thanks

jaros44sr · 01-06-2012, 01:27 PM

it is an electric choke, but should be able to convert, dunno

actually, just looked at it again, and it is a hot air choke, front fuel inlet

do you a pic of the choke side of the carb

**paul mora** · 01-06-2012, 04:50 PM

I have a nice monojet i will sell for 40.00 shipped
Posted via Mobile Device

67gmcstepside · 01-06-2012, 05:51 PM

i have one and will check for man choke as well

**zicc1835** · 01-06-2012, 07:34 PM

im sorry do you want a pic or are you asking me if i want a pic of the choke side and what will you want for it if it works for me
thanks Jess

Quote:

Originally Posted by jaros44sr

it is an electric choke, but should be able to convert, dunno

actually, just looked at it again, and it is a hot air choke, front fuel inlet

do you a pic of the choke side of the carb

**zicc1835** · 01-06-2012, 07:37 PM

can you send pics of monojet is this a ready to run or will need to rebuild
thanks
jess

Quote:

Originally Posted by paul mora

I have a nice monojet i will sell for 40.00 shipped
Posted via Mobile Device

**zicc1835** · 01-06-2012, 07:37 PM

thanks very much

Quote:

Originally Posted by 67gmcstepside

i have one and will check for man choke as well

**paul mora** · 01-06-2012, 07:43 PM

Posted via Mobile Device

**paul mora** · 01-06-2012, 07:45 PM

http://67-72chevytrucks.com/vboard/a...1&d=1299878406

Not sure if that worked it was on a old thread I had for for sale and it was and is 35.00 shipped and worked fine when I took it out of the truck
Posted via Mobile Device

jaros44sr · 01-06-2012, 09:03 PM

Quote:

Originally Posted by zicc1835

im sorry do you want a pic or are you asking me if i want a pic of the choke side and what will you want for it if it works for me
thanks Jess

i dont want anything for it, if you can use it. i just thought i could help if you could show me a pic. of the carb on the choke side

**zicc1835** · 01-07-2012, 12:15 AM

it was i who was confused sorry .... here are 2 pics side view shows where the cable attaches on what would be the drivers side just above the the accelerator linkage ....i will take a close up tomorrow if need be thanks for your help with this
Jess

Quote:

Originally Posted by jaros44sr

i dont want anything for it, if you can use it. i just thought i could help if you could show me a pic. of the carb on the choke side

**zicc1835** · 01-07-2012, 12:25 AM

that worked.... it looks like the base is much different then mine i have 4 hole for studs looks like this has 2 one on each side like a 1 barrel ? unless im wrong i don't think that one will fit if its not to much trouble a picture of the base will help thanks
Jess

Quote:

Originally Posted by paul mora

http://67-72chevytrucks.com/vboard/a...1&d=1299878406

Not sure if that worked it was on a old thread I had for for sale and it was and is 35.00 shipped and worked fine when I took it out of the truck
Posted via Mobile Device

**zicc1835** · 01-07-2012, 10:27 AM

ttt

Quote:

Originally Posted by zicc1835

that worked.... it looks like the base is much different then mine i have 4 hole for studs looks like this has 2 one on each side like a 1 barrel ? unless im wrong i don't think that one will fit if its not to much trouble a picture of the base will help thanks
Jess

jaros44sr · 01-07-2012, 02:02 PM

the only thing that bothers me is that mine has a front fuel inlet. you should be able to switch your manual cable over to mine

does your manifold have the mounting boss for a divorced choke?

**zicc1835** · 01-08-2012, 01:11 AM

if you mean where the heat activated choke hooks to then yes

Quote:

Originally Posted by jaros44sr

the only thing that bothers me is that mine has a front fuel inlet. you should be able to switch your manual cable over to mine

does your manifold have the mounting boss for a divorced choke?

jaros44sr · 01-08-2012, 09:59 AM

Quote:

Originally Posted by zicc1835

if you mean where the heat activated choke hooks to then yes

ok, then this carb would work as is, if you want....

do you want it?

**zicc1835** · 01-08-2012, 11:14 AM

yes pm sent

Quote:

Originally Posted by jaros44sr

ok, then this carb would work as is, if you want....

do you want it?

jaros44sr · 01-08-2012, 01:39 PM

Quote:

Originally Posted by zicc1835

yes pm sent

didnt get it

**zicc1835** · 01-08-2012, 10:02 PM

Just saw this now resent. Pm
Thanks

Quote:

Originally Posted by jaros44sr

didnt get it

Posted via Mobile Device

01-05-2012, 06:55 PM	#1
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,152	WTB 2 barrel carb 2 jet rochester /with manuel choke [FONT="Arial B Attached Images __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-05-2012, 09:51 PM	#2
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,463	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke got one, but i dont think it has a manual choke...ill check tomorrow __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-05-2012, 10:55 PM	#3
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,152	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke thanks __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-06-2012, 01:27 PM	#4
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,463	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke it is an electric choke, but should be able to convert, dunno actually, just looked at it again, and it is a hot air choke, front fuel inlet do you a pic of the choke side of the carb __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 01-06-2012 at 01:37 PM.

01-06-2012, 04:50 PM	#5
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke I have a nice monojet i will sell for 40.00 shipped Posted via Mobile Device __________________ Pulatoy Last edited by paul mora; 01-06-2012 at 04:57 PM.

01-06-2012, 05:51 PM	#6
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke i have one and will check for man choke as well

01-06-2012, 07:43 PM	#10
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke Posted via Mobile Device __________________ Pulatoy

01-06-2012, 07:45 PM	#11
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke http://67-72chevytrucks.com/vboard/a...1&d=1299878406 Not sure if that worked it was on a old thread I had for for sale and it was and is 35.00 shipped and worked fine when I took it out of the truck Posted via Mobile Device __________________ Pulatoy

01-07-2012, 02:02 PM	#16
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,463	Re: WTB 2 barrel carb 2 jet rochester /with manuel choke the only thing that bothers me is that mine has a front fuel inlet. you should be able to switch your manual cable over to mine does your manifold have the mounting boss for a divorced choke? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.