FL WTB: Hatch Handle and Key - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 10-03-2011, 08:59 AM

Looking for a Blazer OE hatch handle in good shape with matching key. I have a repo/AF and not to impressed with it. Thanks

4oldcars · 10-03-2011, 10:09 AM

I'd like to find one of those too! I found one without a key but can't get a locksmith to key it for me. There's an opportunity - become a good locksmith - - - -

bigbadchev72 · 10-03-2011, 06:38 PM

Have you seen the mod of a garage door handle? I did it to my last hatch and didnt have any issues, best part was it looked new and was under $10

**D.PASSMORE** · 10-04-2011, 10:25 AM

Quote:

Originally Posted by bigbadchev72

Have you seen the mod of a garage door handle? I did it to my last hatch and didnt have any issues, best part was it looked new and was under $10

Thats what the AM guys are selling, garage door handles. I like the OE stuff, AM last resort. I might ask a local locksmith to re-key - but my OE handle has some pitting. Still looking... thanks

pound41 · 10-07-2011, 08:57 AM

Search Ebay they come up more often than you think. I got NOS off ebay for a little over $100. I have seen then go up to $ 300. I have a nother nice handle with no key. I have 2 locksmiths here in Northern Va who told me because of design couldn't be re keyed. But there have been board members who say they have gotten theirs redone. I thought about getting a name and trying to contact them. Good Luck

givengold · 10-20-2011, 01:10 AM

My handle is stuck in the vertical (open) position. Is the latch mechanism messed up from this? Would it be worth having a locksmith take a look, or do I need a new assembly?

**D.PASSMORE** · 10-22-2011, 11:43 AM

Quote:

Originally Posted by givengold

My handle is stuck in the vertical (open) position. Is the latch mechanism messed up from this? Would it be worth having a locksmith take a look, or do I need a new assembly?

Not sure, But - ^^^ -

crisco · 11-03-2011, 12:33 PM

Not sure but on my 87 the rear lock cylinder comes out of the handle.

4oldcars · 11-04-2011, 01:55 PM

I found a locksmith in Florida. Well, my brother found him. He says he can re-key it. My handle is there now. Should be ready any day now re-keyed to fit my key. I'll post when I actually have it.

**D.PASSMORE** · 11-04-2011, 02:12 PM

Hey thanks for the info. The OE handle that I have is a pitted on the chrome. I really don't care use that one. I'm looking for a good/clean used OE handle with or without key at this point. When you get it back, can you let me know where the locksmith is located and a thumbs up or down on the workmanship?

4oldcars · 11-05-2011, 11:39 AM

Should have it any day. I'll let you know. Mine is driver quality, but my intent was to send it out to get re-chromed while the lock cylinder is out. I'll keep you posted. I'm old and forgetful. If you don't hear from me try a PM.

4oldcars · 11-16-2011, 12:07 PM

Just heard this AM - - locksmith is having trouble but he is confident he can do this. I'll post as I hear.

bigbadchev72 · 11-17-2011, 08:56 PM

If you end up getting one without a key let me know, I have a guy that can get them keys for $125, usually takes about a day if he is not busy.

**D.PASSMORE** · 11-17-2011, 09:00 PM

Quote:

Originally Posted by bigbadchev72

If you end up getting one without a key let me know, I have a guy that can get them keys for $125, usually takes about a day if he is not busy.

Shoot me the guys business information. Thanks

**LockDoc** · 11-23-2011, 09:24 PM

-
If someone wanted to send me a handle I would take a look at it to see if it could be re-keyed. I don't see why it couldn't though. $125 sounds kind of high for a re-key job...

LockDoc

**D.PASSMORE** · 11-26-2011, 09:30 AM

Thanks Leon, I'll contact you when I get the handle that I'm looking for.

**LockDoc** · 11-26-2011, 08:35 PM

Quote:

Originally Posted by D.PASSMORE

Thanks Leon, I'll contact you when I get the handle that I'm looking for.

OK

LockDoc

4oldcars · 12-23-2011, 11:28 AM

Just thought I'd pass along - - - I'm still waiting. Have heard nothing from the locksmith in Florida and I'm not one to push people. I'm thinkin he's takin a likin to my handle and I may never see it again. Not too sure I'd recommend him.

**D.PASSMORE** · 01-09-2012, 11:39 AM

===========^^^^^^^^^^^^^

^^^^^^^^^^^^============

There's got to be at least one left out there!

10-03-2011, 08:59 AM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	WTB: Hatch Handle and Key Looking for a Blazer OE hatch handle in good shape with matching key. I have a repo/AF and not to impressed with it. Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

10-03-2011, 10:09 AM	#2
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: Hatch Handle and Key I'd like to find one of those too! I found one without a key but can't get a locksmith to key it for me. There's an opportunity - become a good locksmith - - - - __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

10-03-2011, 06:38 PM	#3
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: WTB: Hatch Handle and Key Have you seen the mod of a garage door handle? I did it to my last hatch and didnt have any issues, best part was it looked new and was under $10 __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

10-07-2011, 08:57 AM	#5
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: WTB: Hatch Handle and Key Search Ebay they come up more often than you think. I got NOS off ebay for a little over $100. I have seen then go up to $ 300. I have a nother nice handle with no key. I have 2 locksmiths here in Northern Va who told me because of design couldn't be re keyed. But there have been board members who say they have gotten theirs redone. I thought about getting a name and trying to contact them. Good Luck

10-20-2011, 01:10 AM	#6
givengold Registered User Join Date: Jul 2008 Location: Concord, CA Posts: 194	Re: WTB: Hatch Handle and Key My handle is stuck in the vertical (open) position. Is the latch mechanism messed up from this? Would it be worth having a locksmith take a look, or do I need a new assembly?

11-03-2011, 12:33 PM	#8
crisco Registered User Join Date: Nov 2006 Location: rochester Posts: 71	Re: WTB: Hatch Handle and Key Not sure but on my 87 the rear lock cylinder comes out of the handle.

11-04-2011, 01:55 PM	#9
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: Hatch Handle and Key I found a locksmith in Florida. Well, my brother found him. He says he can re-key it. My handle is there now. Should be ready any day now re-keyed to fit my key. I'll post when I actually have it. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

11-04-2011, 02:12 PM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: WTB: Hatch Handle and Key Hey thanks for the info. The OE handle that I have is a pitted on the chrome. I really don't care use that one. I'm looking for a good/clean used OE handle with or without key at this point. When you get it back, can you let me know where the locksmith is located and a thumbs up or down on the workmanship?

11-05-2011, 11:39 AM	#11
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: Hatch Handle and Key Should have it any day. I'll let you know. Mine is driver quality, but my intent was to send it out to get re-chromed while the lock cylinder is out. I'll keep you posted. I'm old and forgetful. If you don't hear from me try a PM. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

11-16-2011, 12:07 PM	#12
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: Hatch Handle and Key Just heard this AM - - locksmith is having trouble but he is confident he can do this. I'll post as I hear. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

11-17-2011, 08:56 PM	#13
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: WTB: Hatch Handle and Key If you end up getting one without a key let me know, I have a guy that can get them keys for $125, usually takes about a day if he is not busy. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

11-23-2011, 09:24 PM	#15
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,769	Re: WTB: Hatch Handle and Key - If someone wanted to send me a handle I would take a look at it to see if it could be re-keyed. I don't see why it couldn't though. $125 sounds kind of high for a re-key job... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-26-2011, 09:30 AM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: WTB: Hatch Handle and Key Thanks Leon, I'll contact you when I get the handle that I'm looking for.

12-23-2011, 11:28 AM	#18
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: Hatch Handle and Key Just thought I'd pass along - - - I'm still waiting. Have heard nothing from the locksmith in Florida and I'm not one to push people. I'm thinkin he's takin a likin to my handle and I may never see it again. Not too sure I'd recommend him. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

01-09-2012, 11:39 AM	#19
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: WTB: Hatch Handle and Key ===========^^^^^^^^^^^^^^^^^^^^^^^^^============ There's got to be at least one left out there!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.