MD parting out whats left of 69 GMC laying frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 01-04-2012, 09:42 PM

Not your traditional frame layer LOL not much left but let me know if you see something. I can get pics and prices. Most all of the metal is rotten on body panels. Rad. support seems ok front bumper chrome is peeling but straight. Lower engine mounts for small block. has 3 of the rally rims like on driver side. two of the aluminum Jeep rims like on Pass side. A year ago I would have hauled this to scrap without asking ( I bought for the motor) but I have since found out from you guys how needed a lot of the parts are.

Richard

CaptRMW · 01-04-2012, 10:01 PM

I will put RenoKeene first up for the drivers side eyebrow moulding (front edge of fender next to the grille )pending condition and price. It needs to be really nice so look it over....Thanks, Roger

68lowburb · 01-04-2012, 10:11 PM

pics of rad support and bumper ,under battery box if possible thanks jimmy jimmie382000@yahoo.com

**RenoKeene** · 01-04-2012, 10:52 PM

Def interested in driver's side chrome eyebrow pending condition.
Thanks for the heads up CaptRMW
Posted via Mobile Device

**richard2717** · 01-04-2012, 11:26 PM

Reno,
I dont think it is in good enough shape for what you are looking for. I saw you were looking for one in another post. I will get some close ups of it tomorrow for you.

Richard

**richard2717** · 01-04-2012, 11:30 PM

68
I will get some pics tomorrow for you

It looks to me like the bumper may have been rechromed at one point and is peeling but from what I remember it is very straight. not sure of backside condition until I look tomorrow. Last time I looked at radiator support it was in excellent shape. I have not looked at it to hard lately but the other day when I was removing some other parts I did notice the battery tray has a minor amount of rust.

Richard

**richard2717** · 01-04-2012, 11:52 PM

I was able to save some of the lower and upper trim as well. Nothing spectacular but useable pcs. also had the original am radio in it. Cant get the dial to work but chrome looks good, knobs,cups and nuts all in good shape. I also cut the dash metal out of it but I may keep that for the blazer or panel. They have both been cut.

Last_Paladin · 01-05-2012, 08:12 AM

I'd be interested in front and rear bumpers. I'll sandblast and powder coat, so I don't care about chrome.

**richard2717** · 01-05-2012, 12:40 PM

rear bumper is a well used step bumper that I think is twisted. I will get a picture later this morning. You are 2nd `in line behind 68 for the front.

Richard

Last_Paladin · 01-05-2012, 01:43 PM

Quote:

Originally Posted by richard2717

rear bumper is a well used step bumper that I think is twisted. I will get a picture later this morning. You are 2nd `in line behind 68 for the front.

Richard

I'll pass on both, thanks.

**richard2717** · 01-05-2012, 02:15 PM

reno,
Eyebrow does have some rust thru. I saw no need to take a picture.

LOwburb
I took some more pics of the bumper and the rad support this morning. I will email them to you later today when I get them downloaded. SUpport seems very solid I took picture of minor rust thru on the battery tray and a couple pencil sized holes in the floor of the support below the battery tray.

Richard

**richard2717** · 01-05-2012, 04:05 PM

here are a couple pics of rad support & bumper. will email the rest I did notice there is a dent in the front bumper just to the right of the peeling chrome in pic. #1. It was not there last week so I musta got a little close with the bobcat

timberjim36 · 01-05-2012, 06:34 PM

how bad are the doors and dash pad

**richard2717** · 01-05-2012, 07:51 PM

Quote:

Originally Posted by timberjim36

how bad are the doors and dash pad

Doors are rotten dash pad is non existent Sorry

timberjim36 · 01-05-2012, 07:54 PM

no prob thanks

68lowburb · 01-05-2012, 09:27 PM

let me know how much for the support shipped to baton rouge louisiana greyhound station if you can thanks will pass on bumper was going to paint it if it wasnt bent thanks jimmy

**richard2717** · 01-05-2012, 10:27 PM

Jimmy
I will go to the local station beginning of the week and see about shipping. I have to get it removed from the truck and measure it up. They closed the regular terminal here a couple years ago so I am not sure if I can actually ship from here anymore.

Richard

68lowburb · 01-06-2012, 11:30 PM

np just let me know thanks

**richard2717** · 01-07-2012, 06:32 PM

Quote:

Originally Posted by 68lowburb

np just let me know thanks

Just got done pulling the rad. support. I am not thinking you are still gonna want it. After I got it off and upside down I noticed this. Let me know. thanks

68lowburb · 01-07-2012, 11:46 PM

seen worse man , just let me know a price shipped if you can thanks jimmy

**richard2717** · 01-08-2012, 09:19 AM

ok WIll check out different shipping options tomorrow

Richard

68lowburb · 01-08-2012, 09:45 PM

thanks

**richard2717** · 01-08-2012, 10:04 PM

Jimmy,
Got it all measured up and weighed tonite. I think I can just squeeze it thru UPS. I measured it at 20" tall 72" wide 8" deep and about 50lbs. I would have to remove the battery box and the headlights ( hopefully I can get them to lay in the opening of the radiator hole once I cardboard it. I based shipping to zip 70769. Let me know if it is different so I can update shipping costs. If it is correct how does $175 including the ride sound?

Richard

68lowburb · 01-09-2012, 08:57 PM

zip is 70737, will keep it in mind kinda high looking at a rust free one for 125 plus shipping will let you know thanks

01-04-2012, 10:01 PM	#2
CaptRMW Custom Sport W/T Join Date: Nov 2010 Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem Posts: 898	Re: parting out whats left of 69 GMC laying frame I will put RenoKeene first up for the drivers side eyebrow moulding (front edge of fender next to the grille )pending condition and price. It needs to be really nice so look it over....Thanks, Roger

01-04-2012, 10:11 PM	#3
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out whats left of 69 GMC laying frame pics of rad support and bumper ,under battery box if possible thanks jimmy jimmie382000@yahoo.com

01-04-2012, 10:52 PM	#4
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,022	Re: parting out whats left of 69 GMC laying frame Def interested in driver's side chrome eyebrow pending condition. Thanks for the heads up CaptRMW Posted via Mobile Device __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

01-04-2012, 11:26 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame Reno, I dont think it is in good enough shape for what you are looking for. I saw you were looking for one in another post. I will get some close ups of it tomorrow for you. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-04-2012, 11:30 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame 68 I will get some pics tomorrow for you It looks to me like the bumper may have been rechromed at one point and is peeling but from what I remember it is very straight. not sure of backside condition until I look tomorrow. Last time I looked at radiator support it was in excellent shape. I have not looked at it to hard lately but the other day when I was removing some other parts I did notice the battery tray has a minor amount of rust. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-04-2012, 09:42 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	parting out whats left of 69 GMC laying frame Not your traditional frame layer LOL not much left but let me know if you see something. I can get pics and prices. Most all of the metal is rotten on body panels. Rad. support seems ok front bumper chrome is peeling but straight. Lower engine mounts for small block. has 3 of the rally rims like on driver side. two of the aluminum Jeep rims like on Pass side. A year ago I would have hauled this to scrap without asking ( I bought for the motor) but I have since found out from you guys how needed a lot of the parts are. Richard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-04-2012, 11:52 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame I was able to save some of the lower and upper trim as well. Nothing spectacular but useable pcs. also had the original am radio in it. Cant get the dial to work but chrome looks good, knobs,cups and nuts all in good shape. I also cut the dash metal out of it but I may keep that for the blazer or panel. They have both been cut. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-05-2012, 08:12 AM	#8
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 472	Re: parting out whats left of 69 GMC laying frame I'd be interested in front and rear bumpers. I'll sandblast and powder coat, so I don't care about chrome.

01-05-2012, 12:40 PM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame rear bumper is a well used step bumper that I think is twisted. I will get a picture later this morning. You are 2nd `in line behind 68 for the front. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-05-2012, 02:15 PM	#11
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame reno, Eyebrow does have some rust thru. I saw no need to take a picture. LOwburb I took some more pics of the bumper and the rad support this morning. I will email them to you later today when I get them downloaded. SUpport seems very solid I took picture of minor rust thru on the battery tray and a couple pencil sized holes in the floor of the support below the battery tray. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-05-2012, 04:05 PM	#12
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame here are a couple pics of rad support & bumper. will email the rest I did notice there is a dent in the front bumper just to the right of the peeling chrome in pic. #1. It was not there last week so I musta got a little close with the bobcat Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-05-2012, 06:34 PM	#13
timberjim36 Registered User Join Date: Jun 2011 Location: cape cod ma Posts: 160	Re: parting out whats left of 69 GMC laying frame how bad are the doors and dash pad __________________ 1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver) 92 harley electra glide ultra classic

01-05-2012, 07:54 PM	#15
timberjim36 Registered User Join Date: Jun 2011 Location: cape cod ma Posts: 160	Re: parting out whats left of 69 GMC laying frame no prob thanks __________________ 1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver) 92 harley electra glide ultra classic

01-05-2012, 09:27 PM	#16
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out whats left of 69 GMC laying frame let me know how much for the support shipped to baton rouge louisiana greyhound station if you can thanks will pass on bumper was going to paint it if it wasnt bent thanks jimmy

01-05-2012, 10:27 PM	#17
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame Jimmy I will go to the local station beginning of the week and see about shipping. I have to get it removed from the truck and measure it up. They closed the regular terminal here a couple years ago so I am not sure if I can actually ship from here anymore. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

01-06-2012, 11:30 PM	#18
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out whats left of 69 GMC laying frame np just let me know thanks

01-07-2012, 11:46 PM	#20
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out whats left of 69 GMC laying frame seen worse man , just let me know a price shipped if you can thanks jimmy

01-08-2012, 09:19 AM	#21
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame ok WIll check out different shipping options tomorrow Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-08-2012, 09:45 PM	#22
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out whats left of 69 GMC laying frame thanks

01-08-2012, 10:04 PM	#23
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,984	Re: parting out whats left of 69 GMC laying frame Jimmy, Got it all measured up and weighed tonite. I think I can just squeeze it thru UPS. I measured it at 20" tall 72" wide 8" deep and about 50lbs. I would have to remove the battery box and the headlights ( hopefully I can get them to lay in the opening of the radiator hole once I cardboard it. I based shipping to zip 70769. Let me know if it is different so I can update shipping costs. If it is correct how does $175 including the ride sound? Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-09-2012, 08:57 PM	#24
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out whats left of 69 GMC laying frame zip is 70737, will keep it in mind kinda high looking at a rust free one for 125 plus shipping will let you know thanks

Register or Log In To remove these advertisements.