I need one of these

[pdxhall]

I posted in the WTB thread section but I thought I'd throw it out here also. Any of you guys that have parts trucks, do you have a passenger side kick panel vent cover like what's pictured but without the rust holes? There are about 30+ spot welds holding them on so if you don't want to cut them all out you could just cut around it to get it off. Thanks.

[63sbssbbw]

How big of a hurry are you in to get it PD ??
I'm currently tearing into one and most of what I need is drivers side stuff.
Yours for the asking just pay the shipping.
I'll check it out tonight after work,that side is kind of up against the wall,so I haven't really scoped it out good.
Trent

[66farmer]

PDX
Sherwood Pick-N-Pull has a 64 on there lot know. The truck had alot of rust in it not sure about that part.

[padresag]

you can buy them as repair panels
ron

[pdxhall]

Originally Posted by 63sbssbbw

How big of a hurry are you in to get it PD ??
I'm currently tearing into one and most of what I need is drivers side stuff.
Yours for the asking just pay the shipping.
I'll check it out tonight after work,that side is kind of up against the wall,so I haven't really scoped it out good.
Trent

I'm not in a big hurry. Let me know. Thanks

Originally Posted by 66farmer

PDX
Sherwood Pick-N-Pull has a 64 on there lot know. The truck had alot of rust in it not sure about that part.

Thanks. I went to the 2 pick and pulls close to me and had no luck. The main problem with pick and pull is getting it off the truck. I don't think my cordless drill, even with both batteries, will last long enough to drill out all the spot welds and I don't have a cordless sawsall.

Originally Posted by padresag

you can buy them as repair panels
ron

I've seen the lower portion patch panel but as you can see from the picture, mine is rusted out on the upper portion and more on the side you can't see in the picture. Thanks for the info, though.

[62 Longbed]

Bad thing about Pick-Pull is you can't take a cordless sawsall in the yard ... I was at the Sherwood Pick-N-Pull and saw the Red Truck in Reference , but was looking for other things so didn't notice condition of needed section ...

[63sbssbbw]

I checked it out PD,it's in great shape
T

[pdxhall]

Originally Posted by 63sbssbbw

I checked it out PD,it's in great shape
T

I'm sending you a PM. Thanks.

[pdxhall]

Originally Posted by 62 Longbed

Bad thing about Pick-Pull is you can't take a cordless sawsall in the yard ... I was at the Sherwood Pick-N-Pull and saw the Red Truck in Reference , but was looking for other things so didn't notice condition of needed section ...

The guy I talked to at the north Columbia yard said that they did allow cordless sawsalls. Maybe different ones have different rules and then again maybe the guy didn't know what he was talking about. Anyway, it looks like Trent has me covered.

[62 Longbed]

Glad to hear your covered ... The Pick-Pull in Sherwood has a sign posted about the Tools not allowed ... Good Luck !!

[pdxhall]

Originally Posted by 62 Longbed

Glad to hear your covered ... The Pick-Pull in Sherwood has a sign posted about the Tools not allowed ... Good Luck !!

Thanks. This will be my first project welding on my truck. I've been practicing with my new mig and I figured a place that isn't going to show is a good place to start.

[63sbssbbw]

Originally Posted by pdxhall

Thanks. This will be my first project welding on my truck. I've been practicing with my new mig and I figured a place that isn't going to show is a good place to start.

.
Knowing this now PD,I'll try to get this done a little quicker than my PM suggested... T