New wood & stainless bed--for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 08-31-2003, 06:29 PM

I can't remember if I showed this or not...but if I did, just consider this a "TTT"!

LWB with NO gas tank holes! The new wood & stainless has only been installed for a couple weeks. Cost $775 w/shipping and then was finished with marine spar. Selling it all: Bed, inner tubs, TG, wood & stainless for $800!!!

HennyM · 09-01-2003, 10:30 AM

May be just what I'm looking for. How's the fenders & underside? Shipping to the east coast might make it out of the question though...

**PICKMUP** · 09-01-2003, 12:20 PM

The inners have never been damaged or dented and it is a rust free bed, so the underside is perfect. One guy on the board called around his area and found a trucker with a flat bed out on the west coast and had his bed picked up here. I just sat it on the back of the trailer and it was gone.

Yellow Cheyenne · 09-02-2003, 11:30 AM

That guy was me. Cost me $400 to ship to Eastern Kansas. Found a trucker by luck that had room and was ready to head back here and the $400 was gravy as he had enough of a load to make his money. Sad ending to the story was the wrecker company that I hired to lift the bed off of the truckers flatbed and set it on my trailer dropped the bed from a height of about 6'-one of his winches released and it dropped on the drivers side. Luckily, it didn't damage the tool box side that I really needed. Tow truck company paid for damages and I found another bed with the needed parts. My pickup sets with parts from about 6 pickups and has new paint. Just need to finish trimming it out. Tough to find time when working 2 jobs and the arrival of 2 babies within the last 18 months. I'm rambling, I'll quit. Frank is a good guy to deal with-he gave correct description of the bed.

Randy

68-Mike · 09-02-2003, 04:21 PM

Sent you a PM.

08-31-2003, 06:29 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	New wood & stainless bed--for sale I can't remember if I showed this or not...but if I did, just consider this a "TTT"! LWB with NO gas tank holes! The new wood & stainless has only been installed for a couple weeks. Cost $775 w/shipping and then was finished with marine spar. Selling it all: Bed, inner tubs, TG, wood & stainless for $800!!! Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-01-2003, 10:30 AM	#2
HennyM Registered User Join Date: Jun 2003 Location: Philadelphia, PA Posts: 15	May be just what I'm looking for. How's the fenders & underside? Shipping to the east coast might make it out of the question though... __________________ '72 Longbed 2WD Mostly used to hide under from the wife & kids. (But coming along nicely) Southampton, PA '87 Chev 1-Ton 4X4 '52 Ford F1 '97 Harley " No Falls... No Balls ! "

09-01-2003, 12:20 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	The inners have never been damaged or dented and it is a rust free bed, so the underside is perfect. One guy on the board called around his area and found a trucker with a flat bed out on the west coast and had his bed picked up here. I just sat it on the back of the trailer and it was gone. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-02-2003, 11:30 AM	#4
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	That guy was me. Cost me $400 to ship to Eastern Kansas. Found a trucker by luck that had room and was ready to head back here and the $400 was gravy as he had enough of a load to make his money. Sad ending to the story was the wrecker company that I hired to lift the bed off of the truckers flatbed and set it on my trailer dropped the bed from a height of about 6'-one of his winches released and it dropped on the drivers side. Luckily, it didn't damage the tool box side that I really needed. Tow truck company paid for damages and I found another bed with the needed parts. My pickup sets with parts from about 6 pickups and has new paint. Just need to finish trimming it out. Tough to find time when working 2 jobs and the arrival of 2 babies within the last 18 months. I'm rambling, I'll quit. Frank is a good guy to deal with-he gave correct description of the bed. Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

09-02-2003, 04:21 PM	#5
68-Mike Registered User Join Date: Dec 2002 Location: Austin, TX Posts: 135	bed Sent you a PM. __________________ 7th year of '68 C-10 LWB Rebuild in progress. Drivetrain done. Frame stripped, painted & rebuilt. Body/paint next. '18 Yukon '04 Sierra 4X4 ‘77 Chevy C-20 Camper Special ‘68 C-10 Shopping for a 69-72 4x4 Blazer or Jimmy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.