The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical > Truck Audio

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-14-2012, 09:04 PM   #1
Nova_Cobra64
Registered User
 
Nova_Cobra64's Avatar
 
Join Date: Aug 2002
Location: Melville, SK
Posts: 1,144
1 set of components enough?

I'm working on piecing together a stereo system for my 69 GMC. I want to do more of a sound quality setup, don't care much for blaring loud or too much bass these days (getting old at 26 I guess?). My sister's boyfriend has some unused Focal KRX2 components that he wants to sell cheap. They are still more than I planned to spend, but I know what these things are worth and I might as well help them out. They will be either be in fiberglass kick panels or installed on the bottom of the door in fiberglass enclosures. I'm planning to do either a couple 10" or one 12" Alpine Type R. Sub box/amp rack will be built for the space where the fuel tank used to be, and there should be room for additional speakers as well if needed. What I am curious about is if one set of quality components will be adequate, and if not what would be recommended to accompany them (as well as recommended placement)? Both would be running off the same amp, so the second set of speakers should handle the same power as the Focals (100rms, 2 ohms).
__________________
2004 Silverado - Beater
1969 GMC - In progress http://67-72chevytrucks.com/vboard/s...d.php?t=441683
2011 Aveo - Work commuter
2013 Crestliner Fish Hawk 1650 - The reason no work gets done on the project truck.
Nova_Cobra64 is offline   Reply With Quote
Old 01-14-2012, 09:22 PM   #2
dmwphoto
Registered User
 
dmwphoto's Avatar
 
Join Date: Sep 2010
Location: Richmond, Va
Posts: 573
Re: 1 set of components enough?

I put two 4 inch focals in the factory speaker location and the seperation is incredible. I have two 6.5 focals under the bucket seats and a 10 in sub in the center console. 2 amps are under the bucket seats also.
dmwphoto is offline   Reply With Quote
Old 01-14-2012, 09:30 PM   #3
Max1775
Registered User
 
Max1775's Avatar
 
Join Date: Mar 2011
Location: Bandera, Texas
Posts: 251
Re: 1 set of components enough?

One good set should be fine especially in a regular cab truck and that is a really nice set of speakers. Much easier to balance and get proper definition from. Just my opinion...
Max1775 is offline   Reply With Quote
Old 01-14-2012, 10:10 PM   #4
Nova_Cobra64
Registered User
 
Nova_Cobra64's Avatar
 
Join Date: Aug 2002
Location: Melville, SK
Posts: 1,144
Re: 1 set of components enough?

Quote:
Originally Posted by dmwphoto View Post
I put two 4 inch focals in the factory speaker location and the seperation is incredible. I have two 6.5 focals under the bucket seats and a 10 in sub in the center console. 2 amps are under the bucket seats also.
By factory location do you mean under the dash in the center? My truck had a modified stereo when I bought it and I've never paid much attention to why was stock.
Posted via Mobile Device
__________________
2004 Silverado - Beater
1969 GMC - In progress http://67-72chevytrucks.com/vboard/s...d.php?t=441683
2011 Aveo - Work commuter
2013 Crestliner Fish Hawk 1650 - The reason no work gets done on the project truck.
Nova_Cobra64 is offline   Reply With Quote
Old 01-15-2012, 07:04 AM   #5
dmwphoto
Registered User
 
dmwphoto's Avatar
 
Join Date: Sep 2010
Location: Richmond, Va
Posts: 573
Re: 1 set of components enough?

yes in the center of the dash under the perforated area.
dmwphoto is offline   Reply With Quote
Old 01-15-2012, 10:05 PM   #6
jimmydean
Registered User
 
jimmydean's Avatar
 
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
Re: 1 set of components enough?

Yes, a well placed quality set can sound amazing. I had a pair of 6.5 MB Quart's in my Toyota with 2 8" subs. Sounded incredible and took up very little room. I am going a bit higher on the '66, though.
__________________
New Project: 1966 LWB C20
Plans:
1/2 ton conversion
Dropmember front
Dropmember rear
Corvette discs
Restored raised bed

http://67-72chevytrucks.com/vboard/s....php?p=4295210
jimmydean is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com