01-18-2012, 08:37 PM | #1 |
Registered User
Join Date: Mar 2010
Location: simcoe ontario canada
Posts: 681
|
4WD to 2wD
ANyone tell me if a 4WD blazer chassis can be used in 2WD configuration?
In other words with 2WD suspension bolt in a 4wd chassis? thanks in advance
__________________
65 burb On the road Mar 26th Finally |
01-18-2012, 09:35 PM | #2 |
Too Dumb To Know Better
Join Date: Nov 2005
Location: Texas
Posts: 882
|
Re: 4WD to 2wD
Works great. It is done alot. Livrat is the king of this conversion. There are alot of them on here.
|
01-19-2012, 12:05 AM | #3 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
Re: 4WD to 2wD
Sport truck magazine did an article showing the steps to convert. http://www.sporttruck.com/techarticl...ion/index.html
If you plan on going low, you can get lower with the 4wd frame converted than with a 2wd frame.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
01-19-2012, 02:40 PM | #4 |
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: 4WD to 2wD
No problem in the front, but I don't think you can use the trailing arm rear if that's what you were planning.
__________________
1970 2wd Blazer |
01-19-2012, 04:12 PM | #5 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
Re: 4WD to 2wD
The article shows how to install trailing arms in the rear. You have to fab/install some mounts for the shocks/airbags.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
01-19-2012, 04:13 PM | #6 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
Re: 4WD to 2wD
If you want to do it quick, you can use the leaf springs and put the axle on top.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
01-19-2012, 05:41 PM | #7 |
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: 4WD to 2wD
Sorry about that...but for what it's worth, anything's possible with a welder and fab skills. I kinda figured he meant a true "bolt on" swap. The article does make it seem very simple though.
__________________
1970 2wd Blazer |
01-19-2012, 06:20 PM | #8 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
Re: 4WD to 2wD
You are right. If you want just bolt on, using the leaf springs and putting the axle on top is the easiest.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
01-19-2012, 08:51 PM | #9 | |
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,482
|
Re: 4WD to 2wD
Quote:
Takes a good bit of work to cut or drill out all rivets from a 4x4 chassis. You will need to add trailing arms with coil springs or bag it. front cross member from a donor truck with disk brakes. rework exhaust and brake lines. Different trans, and drive shaft relocate shocks. The short answer was (Yes) its been done. |
|
Bookmarks |
|
|