Sal's '55 Chevy "Public Disturbance"

[Sal's '55 Chevy]

Hi Guys,

Well i know some have seen me post some questions on this forum and if you haven't well i think its about that time. I am starting my thread to my project i call her "Public Disturbance" i will get into why i picked that name later. I bought this truck a few miles down the road from my house, it was just sitting in someones back yard just trying to dig its grave site. I have made a lot of progress but i will rewind time and start over for everyone. So now the the introduction of "Public Disturbance" when i bought it for a really good price.

[Sal's '55 Chevy]

More Picture i know how people like to see pictures!!!!

[52 Rat]

Yes sir, thats what I'm talking about! Love the truck. Now it's time to start a build thread with a lot of pics. Welcome!

[Sal's '55 Chevy]

yupp, i tried my best to take as many pictures as i went on with the progress.

[52 Rat]

Originally Posted by Sal's '55 Chevy

yupp, i tried my best to take as many pictures as i went on with the progress.

I have over 200 photos and I'm not even half way through my build project. I'm going to get a digital slide show photo frame for my build photos. It will make a good conversation piece for my office.

[Sal's '55 Chevy]

Originally Posted by 52 Rat

I have over 200 photos and I'm not even half way through my build project. I'm going to get a digital slide show photo frame for my build photos. It will make a good conversation piece for my office.

well i have two separate folders on my comp. one for ideas and the other is my truck so yea i have more than a few of my own haha.... but ill make this thread interesting.

[jimig1]

Originally Posted by 52 Rat

I have over 200 photos and I'm not even half way through my build project. I'm going to get a digital slide show photo frame for my build photos. It will make a good conversation piece for my office.

I here you. I have over 300 pics and I think I'm getting to about the half way point.

[Sal's '55 Chevy]

So i was able to bring the truck home finally after tracking the owner down for it the land it was one was the owners brother-in-law. I brought it home and admittedly started working on it....well i say that but really just going through it and cleaning it some took the front clip off and more.......

[Sal's '55 Chevy]

more like i said......

[Daze57]

great picts. - welcome aboard the forum - good ppl and info on this site -
glad to see another forgotton metal brother bein saved !

[_Ogre]

looks like a good body to start with, good save.

you weren't kidding about it trying to dig it's own grave...

[Daze57]

love the pictures of trucks that are either half buried in dirt - or forgotton in thickets - trees -overun by tall grasses or brush or weeds - then found and ressurected - the stories they could tell .

[Kabwe]

Another good looking project truck. Nice save and keep the pics coming.

[mr48chev]

That looks like a great start on a nice truck. Keep us posted on the progress.

[Sal's '55 Chevy]

Originally Posted by Kabwe

Another good looking project truck. Nice save and keep the pics coming.

thanks, i have followed your build and let just say i wish i had your skills....you truck is bada$$ can't wait for it to be done.

[Kim57]

Looks like a great start. Do keep the pics coming.
Kim

[Sal's '55 Chevy]

got to pulling the motor out i did try to start it but i was new to all the thing you have to do just to start these old motors.....once i pulled it out i noticed that you have a starter pedal and more....but i didn't care to much because i wasn't planning on using this 235 i need more horses!!!!

[Sal's '55 Chevy]

i pulled the motor out and been looking to see whats the best option for my truck a IFS mustang II suspension or putting a camaro clip on it. I have heard the mustang II does not do well on the highway. Has anyone heard of anything bad as far as any of these options? I want your votes that would be helpful....

[Kabwe]

Originally Posted by Sal's '55 Chevy

i pulled the motor out and been looking to see whats the best option for my truck a IFS mustang II suspension or putting a camaro clip on it. I have heard the mustang II does not do well on the highway. Has anyone heard of anything bad as far as any of these options? I want your votes that would be helpful....

Hey Sal,

I have been installing mustang 2 suspension for years and never had an issue with how they ride. I use Heidts or TCI units. Now I have a friend who has a Mustang 2 from a Mustang 2 donor car and I don't like the way it rides and that could be what people are talking about. I think its the installation because my brother did one back in the day and the ride was fine.

I do believe there are better options with aftermarket suspensions like your Scotts IFS, No limit IFS, Heidts Superride, The higher end TCI stuff, etc. The mustang 2 was in my budget so I went that route. If I was to do it again I would lean towards one of the above or just do a Flatout Engineering crossmember with the corvette components. Reason? I like the upper a arms design better on those units, but thats just me.

Now as for donor cars you can't go wrong with a GM Clip. If it is installed right its completely safe and rides great and its been done for years with great results. I personally prefer the 78-88 Monte Carlo for 55-59 trucks because the track width is not as wide as the Carmaro but the Carmaro/Firebird clip is more commonly used. I still install clips on people rides and a lot of guys I know still prefer them.

Its all about choices there is no right are wrong. It's all about what you really want and can afford. I hope this helps a little in your decision making.

[Sal's '55 Chevy]

Originally Posted by Kabwe

Hey Sal,

I have been installing mustang 2 suspension for years and never had an issue with how they ride. I use Heidts or TCI units. Now I have a friend who has a Mustang 2 from a Mustang 2 donor car and I don't like the way it rides and that could be what people are talking about. I think its the installation because my brother did one back in the day and the ride was fine.

I do believe there are better options with aftermarket suspensions like your Scotts IFS, No limit IFS, Heidts Superride, The higher end TCI stuff, etc. The mustang 2 was in my budget so I went that route. If I was to do it again I would lean towards one of the above or just do a Flatout Engineering crossmember with the corvette components. Reason? I like the upper a arms design better on those units, but thats just me.

Now as for donor cars you can't go wrong with a GM Clip. If it is installed right its completely safe and rides great and its been done for years with great results. I personally prefer the 78-88 Monte Carlo for 55-59 trucks because the track width is not as wide as the Carmaro but the Carmaro/Firebird clip is more commonly used. I still install clips on people rides and a lot of guys I know still prefer them.

Its all about choices there is no right are wrong. It's all about what you really want and can afford. I hope this helps a little in your decision making.

Thanks for the feedback Kawbe, i like the real clean look of the mustang 2 suspensions and its not like i will be on the highway much but it is a little out of my budget.... I would either have to look for a donor car on craigslist and if not maybe a mustang 2 on a budget.

[Sal's '55 Chevy]

So i posted some things on craigslist to make me some money off of parts i won't be needing.....I know some people are going to be like are you crazy and some are going to be like but i think i have a good idea haha trying to get it however i can.....

[Handfull 54]

I used a FatMan Mustang II and have no problems on the road. I will in the future go with a newer rack, as the older ones seem to make the steering a little quick for my liking even with the power steering pump modified to reduce the pressure. I like the name of your truck. Best wishes for a great truck when your done.

[juanz1947]

How much are you asking for the rear bumper and do you know what year if for

[Sal's '55 Chevy]

Originally Posted by Handfull 54

I used a FatMan Mustang II and have no problems on the road. I will in the future go with a newer rack, as the older ones seem to make the steering a little quick for my liking even with the power steering pump modified to reduce the pressure. I like the name of your truck. Best wishes for a great truck when your done.

thanks, for the positive input on the MII suspension and thanks for liking the project name. Yup get interesting when you have to do everything on your driveway...

[Sal's '55 Chevy]

Originally Posted by juanz1947

How much are you asking for the rear bumper and do you know what year if for

I sold the bumper already but i have another from a 55 to late 60's stepside bumper for sale if your interested just make me an offer and if we come to an agreement ill figure out the cost for shipping if necessary