GA 1969 GMC SWB Fleetside Project For Sale

[greg65]

We bought this for afather and son project but have decided to go a different route.The PO started filling in the fuel filler, heater box openings, and the cargo lamp. I was surprised at how good of shape the floor pans and rockers ane in. The only part that is not original is the right cab corner. The left cab corner need to be replaced. There is also some extra parts that go with the truck. I would like to sell all of it together for 750.00.

[greg65]

The two bedsides and tailgate are dented up pretty bad but the floor is pretty decent.

[greg65]

Here is some shots of the floor.

[greg65]

Some from under the truck.

[greg65]

The front suspension

tubular lower control arms
ECE 1 1/2 lowered springs
moog front end conponets
disc brake front end with new rotors
seven inc ralley wheels

The rear is still six lug with two inch blocks and springs. Also has eight inch ralley wheels.

The frame was originally a leaf spring setup that has been changed to coil.

[greg65]

Extra Parts

2 automatic trans crossmembers
5 door glasses
1 windshield
2 back glasses
4 vent windows
1 set of chrome moulding for the back of the cab
1 set of chrome back glass mouldings
1 set of chrome windshield mouldings
5 sun visors
4 glove box doors
1 set of original brake lines
1 box of wiring harnesses
2 cowl panels
1 passenger side door
3 metal door panels
1 original chrome bumber
2 front inner fenders
5 window regulators
1 auto brake pedal assembly
1 350 turbo transmission ( not sure of condition came with truck)
2 new cab corners
2 new kick panel repair panels.

[flashed]

WOW ,what a great deal so close to home .If I could ever sell my 55 Bel Air Id be all over that .Good luck with the sale.

[greg65]

now for the bad. The patch panels for the upper windshield area come off of a Az. truck.

[greg65]

Originally Posted by flashed

WOW ,what a great deal so close to home .If I could ever sell my 55 Bel Air Id be all over that .Good luck with the sale.

Thanks, it will make someone a good project. I'm just trying to free up some cash for my '65. My son is real interested in the square body trucks.

[greg65]

Also the area under the cowl panel will have to be replaced.

[greg65]

This is wat it looked like with the engine and front sheetmetal still attached. We decided to hang on the '67 frontend for hopefully another project later.

[68lowburb]

bump

[Pro Metal Shop]

Awesome deal wish I was closer I would scoop that up.
Posted via Mobile Device

[gcburdic]

Greg...since you are not parting this, please list in the trucks for sale forum....Thanks