ebay GMC 305 V6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beefshreadder116 · 01-21-2012, 06:50 PM

http://www.ebay.com/itm/gmc-305-v6-/...item2a18320e99

**dtkarst** · 01-21-2012, 09:59 PM

I was the highest bidder, but it definitely didnt make reserve haha

derail · 01-21-2012, 10:21 PM

Were you looking for one of these? There is one about 10 miles away from me.http://redding.craigslist.org/pts/2775041661.html (This isn't mine)

jbgroby · 01-21-2012, 11:04 PM

That hydramatic is a rare one,

**dtkarst** · 01-22-2012, 03:26 PM

Only problem is I am in the middle of nowhere haha Hays, KS

jbgroby · 01-22-2012, 04:15 PM

Try this. Check with the stovebolt locator, see if there is a member close by who can pick it up and hold it for you until you can arrange shipping or relay shipping. Easier said than done. 99% good folks over at Stovebolt.com Check front office button, stovebolt locator, send an email dir. to member.

Jake

derail · 01-22-2012, 05:45 PM

Quote:

Originally Posted by jbgroby

Try this. Check with the stovebolt locator, see if there is a member close by who can pick it up and hold it for you until you can arrange shipping or relay shipping. Easier said than done. 99% good folks over at Stovebolt.com Check front office button, stovebolt locator, send an email dir. to member.

Jake

No need to bother with Stovebolt. I'm right here! If you seriously are considering this, PM me. I could help you out. Like I said, this isn't mine. I don't know anything about it, but if you want to do the legwork with the seller and figure out shipping, I would be willing to help you out.

**dtkarst** · 01-23-2012, 09:50 PM

I appreciate it a lot same goes for anyone around here for the same deal. I messaged him and he wants 500 for just the motor and I couldnt see paying that much especially if he wont include the trans. What do you all think?

markeb01 · 01-23-2012, 10:19 PM

Other than dedicated V6 enthusiasts there just isn’t much demand for a used V6. Once out of the truck it becomes an 800+ pound burden. A rebuilt Hydramatic on the other hand might be much more desirable to a wider audience, especially if it could be used in other applications.

**dtkarst** · 01-23-2012, 10:52 PM

WOuld that hydramatic bolt onto my 327? I have an auto column just no trans

01-21-2012, 06:50 PM	#1
beefshreadder116 Registered User Join Date: Feb 2009 Location: Walla Walla, WA Posts: 160	ebay GMC 305 V6 http://www.ebay.com/itm/gmc-305-v6-/...item2a18320e99 __________________ Projects: 66 gmc, SWB ,BBW,76 disc brakes/PS and rearend, pancaked crossmember 2 1/2" drop spindles 1 cut coil, 6" drop coils 2 " blocks c-notch with a 350.

01-21-2012, 09:59 PM	#2
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: ebay GMC 305 V6 I was the highest bidder, but it definitely didnt make reserve haha

01-21-2012, 10:21 PM	#3
derail Registered User Join Date: Sep 2005 Location: redding,ca. Posts: 182	Re: ebay GMC 305 V6 Were you looking for one of these? There is one about 10 miles away from me.http://redding.craigslist.org/pts/2775041661.html (This isn't mine) Last edited by derail; 01-21-2012 at 10:28 PM.

01-21-2012, 11:04 PM	#4
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: ebay GMC 305 V6 That hydramatic is a rare one, __________________ http://s1299.photobucket.com/user/jb...23904108567829

01-22-2012, 03:26 PM	#5
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: ebay GMC 305 V6 Only problem is I am in the middle of nowhere haha Hays, KS

01-22-2012, 04:15 PM	#6
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: ebay GMC 305 V6 Try this. Check with the stovebolt locator, see if there is a member close by who can pick it up and hold it for you until you can arrange shipping or relay shipping. Easier said than done. 99% good folks over at Stovebolt.com Check front office button, stovebolt locator, send an email dir. to member. Jake __________________ http://s1299.photobucket.com/user/jb...23904108567829

01-23-2012, 09:50 PM	#8
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: ebay GMC 305 V6 I appreciate it a lot same goes for anyone around here for the same deal. I messaged him and he wants 500 for just the motor and I couldnt see paying that much especially if he wont include the trans. What do you all think?

01-23-2012, 10:19 PM	#9
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: ebay GMC 305 V6 Other than dedicated V6 enthusiasts there just isn’t much demand for a used V6. Once out of the truck it becomes an 800+ pound burden. A rebuilt Hydramatic on the other hand might be much more desirable to a wider audience, especially if it could be used in other applications.

01-23-2012, 10:52 PM	#10
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: ebay GMC 305 V6 WOuld that hydramatic bolt onto my 327? I have an auto column just no trans



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.