Best Place to Purchase parts for 62-66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m455sx · 01-23-2012, 12:39 PM

I want to know who has the best parts for the money? I do not mind spending a few extra bucks if the part are nice. I am getting ready to purchase new mirrors in and out and new wiring harness for front parking lights and wanted to know who is best place to buy from as i want very good quality.

GMR-PERFORMANCE · 01-23-2012, 12:49 PM

I used American auto wire and really like the quality of the kit and the customer service is top notch. . Mirrors I cannot help you with, run a cheap peep and a rear view . Would toss the peep if I could get away with it.

1963c-10 · 01-23-2012, 12:49 PM

Classic Parts of America, Tim Tygerts Obsolete Chevy Parts, Bowtie bits, LMC are the four that I use the most and in that order. I always try and go NOS 1st, which I normally get form Tim Tygerts or a local yard/swap meet. The reproduction stuff is almost all made by the same people, so venders are a preference....but watch out, there are some big differences in shipping for different co's. GM & GM restoration still carries alot of parts also. I got all my replacement harness's and mirror's from Classic Parts of America and parts arrived within 3-4 days after paid for. Always had great service from them. BTW- Did you find your guages?

m455sx · 01-23-2012, 12:54 PM

Great thanks for all the info!!! Keep em coming....GMC1966 is supposedly getting me a picture of guages, he is also trying to locate a steering wheel.

markeb01 · 01-23-2012, 12:55 PM

Here are a variety of opinions to similar questions:

http://67-72chevytrucks.com/vboard/s...t=classicparts

http://67-72chevytrucks.com/vboard/s...t=classicparts

http://67-72chevytrucks.com/vboard/s...t=classicparts

http://67-72chevytrucks.com/vboard/s...t=classicparts

**Clyde65** · 01-23-2012, 12:56 PM

I have used Classic Parts for over 20 years, never had an issue and very prompt service and decent prices, they will have all you posted here.

m455sx · 01-23-2012, 01:39 PM

Is this Guy Tim Tygerts a person on this forum or a supplier?

SNTOS63 · 01-23-2012, 01:52 PM

I'm In California, and I am most people I know buy from The Truck Shop in Orange, CA and also from Brothers Chevy / GMC Parts in Corona, CA. Both are great suppliers. They have it all! If I can't find something in one shop, I can find it at the other. These are my suppliers. All I buy from.
Posted via Mobile Device

SNTOS63 · 01-23-2012, 01:55 PM

My buddy also says that Classic Parts is a really good place also.
Posted via Mobile Device

1963c-10 · 01-23-2012, 03:43 PM

Quote:

Originally Posted by SNTOS63

I'm In California, and I am most people I know buy from The Truck Shop in Orange, CA and also from Brothers Chevy / GMC Parts in Corona, CA. Both are great suppliers. They have it all! If I can't find something in one shop, I can find it at the other. These are my suppliers. All I buy from.
Posted via Mobile Device

Yeah, but your shipping in state with both of those. They carry alot of parts, but shipped to NC/VA is not cheap even on $5 parts.

1963c-10 · 01-23-2012, 03:44 PM

Quote:

Originally Posted by m455sx

Is this Guy Tim Tygerts a person on this forum or a supplier?

Supplier. Check out Tim Tygerts Obsolete Chevy Parts...I believe hes in GA. www.obschevy.com I believe is his link

awbrown · 01-23-2012, 04:36 PM

check out top banana parts ,they are close to you .....
http://www.topbananaparts.com/servle...966/Categories

SNTOS63 · 01-23-2012, 05:18 PM

That is true. I just drive my 63 on over to the shops since I'm right here, but I believe Classic Parts is somewhere on the east right? And they have most everything too. I guess it's best to go with a company that offers free shipping on a certain amount of money spent right?
Posted via Mobile Device

61_FL_Apache · 01-23-2012, 05:18 PM

I have used Classic and LMC.

1963c-10 · 01-23-2012, 05:30 PM

Yeah. I agree with that. I believe Classic Parts is out of Kansas? I wish we had a supplier that we could just drive to. Be nice , especially when in the middle of a project and you need something. I have used The Truck Shop before with no problem though.

stealth_weapons · 01-23-2012, 06:33 PM

i have LMC about 60 miles down the road Classic Parts is about 70 miles( benefit of being stationed at Whiteman AFB). so i can put eyes on the parts before purchasing so all my buying experiences have been great.

**yelmer** · 01-23-2012, 06:37 PM

American autowire . Does the best factory correct wiring

m455sx · 01-24-2012, 09:50 PM

thnx for all the info it was greatly appreciated!!!!

01-23-2012, 12:39 PM	#1
m455sx Registered User Join Date: Nov 2011 Location: powhatan virginia Posts: 402	Best Place to Purchase parts for 62-66 I want to know who has the best parts for the money? I do not mind spending a few extra bucks if the part are nice. I am getting ready to purchase new mirrors in and out and new wiring harness for front parking lights and wanted to know who is best place to buy from as i want very good quality. __________________ 1970 442 convertible 1970 Cutlass SX 1962 Chevy Stepside 2011 GMC 3500HD Crewcab SLT DRW

01-23-2012, 12:49 PM	#2
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: Best Place to Purchase parts for 62-66 I used American auto wire and really like the quality of the kit and the customer service is top notch. . Mirrors I cannot help you with, run a cheap peep and a rear view . Would toss the peep if I could get away with it.

01-23-2012, 12:49 PM	#3
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Best Place to Purchase parts for 62-66 Classic Parts of America, Tim Tygerts Obsolete Chevy Parts, Bowtie bits, LMC are the four that I use the most and in that order. I always try and go NOS 1st, which I normally get form Tim Tygerts or a local yard/swap meet. The reproduction stuff is almost all made by the same people, so venders are a preference....but watch out, there are some big differences in shipping for different co's. GM & GM restoration still carries alot of parts also. I got all my replacement harness's and mirror's from Classic Parts of America and parts arrived within 3-4 days after paid for. Always had great service from them. BTW- Did you find your guages? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

01-23-2012, 12:54 PM	#4
m455sx Registered User Join Date: Nov 2011 Location: powhatan virginia Posts: 402	Re: Best Place to Purchase parts for 62-66 Great thanks for all the info!!! Keep em coming....GMC1966 is supposedly getting me a picture of guages, he is also trying to locate a steering wheel. __________________ 1970 442 convertible 1970 Cutlass SX 1962 Chevy Stepside 2011 GMC 3500HD Crewcab SLT DRW

01-23-2012, 12:55 PM	#5
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Best Place to Purchase parts for 62-66 Here are a variety of opinions to similar questions: http://67-72chevytrucks.com/vboard/s...t=classicparts http://67-72chevytrucks.com/vboard/s...t=classicparts http://67-72chevytrucks.com/vboard/s...t=classicparts http://67-72chevytrucks.com/vboard/s...t=classicparts

01-23-2012, 12:56 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Best Place to Purchase parts for 62-66 I have used Classic Parts for over 20 years, never had an issue and very prompt service and decent prices, they will have all you posted here. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-23-2012, 01:39 PM	#7
m455sx Registered User Join Date: Nov 2011 Location: powhatan virginia Posts: 402	Re: Best Place to Purchase parts for 62-66 Is this Guy Tim Tygerts a person on this forum or a supplier? __________________ 1970 442 convertible 1970 Cutlass SX 1962 Chevy Stepside 2011 GMC 3500HD Crewcab SLT DRW

01-23-2012, 01:52 PM	#8
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: Best Place to Purchase parts for 62-66 I'm In California, and I am most people I know buy from The Truck Shop in Orange, CA and also from Brothers Chevy / GMC Parts in Corona, CA. Both are great suppliers. They have it all! If I can't find something in one shop, I can find it at the other. These are my suppliers. All I buy from. Posted via Mobile Device

01-23-2012, 01:55 PM	#9
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: Best Place to Purchase parts for 62-66 My buddy also says that Classic Parts is a really good place also. Posted via Mobile Device

01-23-2012, 04:36 PM	#12
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: Best Place to Purchase parts for 62-66 check out top banana parts ,they are close to you ..... http://www.topbananaparts.com/servle...966/Categories

01-23-2012, 05:18 PM	#13
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: Best Place to Purchase parts for 62-66 That is true. I just drive my 63 on over to the shops since I'm right here, but I believe Classic Parts is somewhere on the east right? And they have most everything too. I guess it's best to go with a company that offers free shipping on a certain amount of money spent right? Posted via Mobile Device

01-23-2012, 05:18 PM	#14
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Best Place to Purchase parts for 62-66 I have used Classic and LMC. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

01-23-2012, 05:30 PM	#15
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Best Place to Purchase parts for 62-66 Yeah. I agree with that. I believe Classic Parts is out of Kansas? I wish we had a supplier that we could just drive to. Be nice , especially when in the middle of a project and you need something. I have used The Truck Shop before with no problem though. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

01-23-2012, 06:33 PM	#16
stealth_weapons Registered User Join Date: Dec 2010 Location: Whiteman AFB, MO. Posts: 200	Re: Best Place to Purchase parts for 62-66 i have LMC about 60 miles down the road Classic Parts is about 70 miles( benefit of being stationed at Whiteman AFB). so i can put eyes on the parts before purchasing so all my buying experiences have been great. __________________ the Stealth Weapons 63 project, all comments, advice, and critiques welcome! http://67-72chevytrucks.com/vboard/s...d.php?t=438235

01-23-2012, 06:37 PM	#17
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: Best Place to Purchase parts for 62-66 American autowire . Does the best factory correct wiring



Register or Log In To remove these advertisements.

01-24-2012, 09:50 PM	#18
m455sx Registered User Join Date: Nov 2011 Location: powhatan virginia Posts: 402	Re: Best Place to Purchase parts for 62-66 thnx for all the info it was greatly appreciated!!!! __________________ 1970 442 convertible 1970 Cutlass SX 1962 Chevy Stepside 2011 GMC 3500HD Crewcab SLT DRW

Register or Log In To remove these advertisements.