cowl induction hood questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AirMale · 09-03-2003, 05:40 PM

I need 3 inches of "true" clearance in a cowl hood. Can someone reccommend a hood that just not for show? 81-87 model. I've seen the back of some and it appears to just be a raised portion of the hood without actual clearance. Anyone running a Harwood?

Low87on20s · 09-03-2003, 05:58 PM

You might want to try GlassTek. I know that they have a 4 inch hood. I know that they will custom make you one too...atleast they would in the past.

gldevall · 09-03-2003, 10:24 PM

Harwood hoods are excellent and you can get them with a 4" cowl.

**Captkaos** · 09-04-2003, 01:54 PM

I personally don't like the fit/finish of Harwood hoods. In the past they needed ALOT of finishing work, and the underside was NOT finished. USBODY at one time made a 3" hood.

What do you have under there than needs that kind of clearance?

AirMale · 09-04-2003, 04:01 PM

I'm trying to shoe-horn my new 9 liter in there. I have a set of Profiler heads and port matched high rise intake that I don't want to seperate. The edelbrock intake might fit but again I want to stay with this intake. I may end up with an aero-scoop like Ragin'rat. I'd post a pic but I can't seem to shrink it enough to post. I'll try again tonight.

bagged81 · 09-04-2003, 04:43 PM

Quote:

Originally posted by Captkaos
In the past they needed ALOT of finishing work, and the underside was NOT finished.

I have one and that is all true. I have a lot of blocking in mine.

AirMale · 09-04-2003, 08:14 PM

Need 3" for my 9 liter

gldevall · 09-05-2003, 09:23 AM

That is freaking awesome! When you think you will have it ready to go?

bigblock73 · 09-05-2003, 09:38 AM

How many cubic inches is nine liters? 502?

-Jeff

gldevall · 09-05-2003, 11:45 AM

Mathematically it's 549 cubic inches....God I'm bored!!!

AirMale · 09-05-2003, 01:13 PM

It's a 548cu. 4.25 crank with 4.530 bore. I invested in the merlin III because it can safely go to 4.625 bore. I think this will keep me busy for years to come.

Jonboy · 09-05-2003, 01:14 PM

Harwood has gone through and fixed a lot of their hoods. I put one on a 92 Camaro, and it was pretty nice. The underside was finished nicely, and it was pretty straight. They also had it without the silly body line down the middle. The new Camaro hood was nice, but not sure about the truck hoods. Sorry.

09-03-2003, 05:40 PM	#1
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	cowl induction hood questions I need 3 inches of "true" clearance in a cowl hood. Can someone reccommend a hood that just not for show? 81-87 model. I've seen the back of some and it appears to just be a raised portion of the hood without actual clearance. Anyone running a Harwood? __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-03-2003, 05:58 PM	#2
Low87on20s Live from Atlanta Join Date: May 2003 Location: Atlanta, GA Posts: 511	You might want to try GlassTek. I know that they have a 4 inch hood. I know that they will custom make you one too...atleast they would in the past. __________________ Paul Last edited by Low87on20s; 09-03-2003 at 06:01 PM.

09-03-2003, 10:24 PM	#3
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Harwood hoods are excellent and you can get them with a 4" cowl. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

09-04-2003, 01:54 PM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	I personally don't like the fit/finish of Harwood hoods. In the past they needed ALOT of finishing work, and the underside was NOT finished. USBODY at one time made a 3" hood. What do you have under there than needs that kind of clearance? __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

09-04-2003, 04:01 PM	#5
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	I'm trying to shoe-horn my new 9 liter in there. I have a set of Profiler heads and port matched high rise intake that I don't want to seperate. The edelbrock intake might fit but again I want to stay with this intake. I may end up with an aero-scoop like Ragin'rat. I'd post a pic but I can't seem to shrink it enough to post. I'll try again tonight. __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-04-2003, 08:14 PM	#7
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Need 3" for my 9 liter Attached Images __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-05-2003, 09:23 AM	#8
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	That is freaking awesome! When you think you will have it ready to go? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

09-05-2003, 09:38 AM	#9
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	How many cubic inches is nine liters? 502? -Jeff

09-05-2003, 11:45 AM	#10
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Mathematically it's 549 cubic inches....God I'm bored!!! __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

09-05-2003, 01:13 PM	#11
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	It's a 548cu. 4.25 crank with 4.530 bore. I invested in the merlin III because it can safely go to 4.625 bore. I think this will keep me busy for years to come. __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

09-05-2003, 01:14 PM	#12
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Harwood has gone through and fixed a lot of their hoods. I put one on a 92 Camaro, and it was pretty nice. The underside was finished nicely, and it was pretty straight. They also had it without the silly body line down the middle. The new Camaro hood was nice, but not sure about the truck hoods. Sorry. __________________ 1974 Jimmy- 5.3/4L80e/NP241



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.