Fuel filter location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tekno62 · 01-30-2012, 03:01 AM

I was wondering where to put an aftermarket fuel filter - 72 chevy truck

MagmaJct · 01-30-2012, 07:24 AM

My truck has an Edelbrock, but is otherwise stock. The previous owner (my late uncle) didn't install a filter. It eventually flooded the engine because grit jammed the needle valve open.

I installed a filter in the fuel line above the right cylinder head. In hindsight it wasn't a good choice. The lines where they are clamped to the filter are leaking a tad. This is the pressure line, so any leak will show, and it's not in a good place being above the exhaust and all.

If it wasn't all hard lined, I'd consider installing the filter on the suction side of the pump. There would be concern of cavitation or vapor lock. But I'm thinking if a large enough filter is used with high surface area in the filter medium, there should be no problem.

bobs409 · 01-30-2012, 07:38 AM

I have an inline filter just before the pump on most of my cars/trucks. I use a Fram see thru (plastic) and just put in the rubber hose between the pump and the line that sticks through the frame.

It's easy to get to, out of harms way there and away from the hot engine. Best of all, I don't have to cut any stock metal lines.

eightbanger · 01-30-2012, 09:38 AM

Mine has an inline between the pump & carb, I think it's quite a common place to have one mounted.

cdowns · 01-30-2012, 10:42 AM

fuel filter between pump and carb has been proven to b the best way// having fuel filter b4 the pump makes pump work harder and is less reliable

tekno62 · 01-30-2012, 11:29 AM

thanks for the fast replys - I was hoping you all could post pictures of your installs for me.

hayhauler71 · 01-30-2012, 12:09 PM

one under the tank where the rubber hose goes to the steel line on frame and one near the carb

treveiger · 01-30-2012, 12:44 PM

I have one under the carb. Works for me.
Posted via Mobile Device

Wrenchbender Ret · 01-30-2012, 04:56 PM

I always put one between the tank & pump unless I have a new tank. Grit can get in the fuel pump check valves & cause failure. Its good to have one in the carb inlet or in the line between the pump & carb like Hayhauler says.

tekno62 · 01-30-2012, 05:16 PM

Quote:

Originally Posted by Wrenchbender Ret

I always put one between the tank & pump unless I have a new tank. Grit can get in the fuel pump check valves & cause failure. Its good to have one in the carb inlet or in the line between the pump & carb like Hayhauler says.

yea I know the check valve on the fuel pump is bad.

01-30-2012, 03:01 AM	#1
tekno62 Registered User Join Date: Nov 2008 Location: San Jose Ca Posts: 265	Fuel filter location I was wondering where to put an aftermarket fuel filter - 72 chevy truck

01-30-2012, 07:24 AM	#2
MagmaJct Registered User Join Date: May 2008 Location: Mesa, AZ Posts: 281	Re: Fuel filter location My truck has an Edelbrock, but is otherwise stock. The previous owner (my late uncle) didn't install a filter. It eventually flooded the engine because grit jammed the needle valve open. I installed a filter in the fuel line above the right cylinder head. In hindsight it wasn't a good choice. The lines where they are clamped to the filter are leaking a tad. This is the pressure line, so any leak will show, and it's not in a good place being above the exhaust and all. If it wasn't all hard lined, I'd consider installing the filter on the suction side of the pump. There would be concern of cavitation or vapor lock. But I'm thinking if a large enough filter is used with high surface area in the filter medium, there should be no problem. __________________ I own 3 classic vehicles. 1971 LWB C10 Deluxe. 1974 VW Super Beetle. 1971 VW Fastback. The C10 and the Super Beetle run, the Fastback is just not there yet! Please visit my Super Beetle and Fastback profile on TheSamba.

01-30-2012, 07:38 AM	#3
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: Fuel filter location I have an inline filter just before the pump on most of my cars/trucks. I use a Fram see thru (plastic) and just put in the rubber hose between the pump and the line that sticks through the frame. It's easy to get to, out of harms way there and away from the hot engine. Best of all, I don't have to cut any stock metal lines. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

01-30-2012, 09:38 AM	#4
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Fuel filter location Mine has an inline between the pump & carb, I think it's quite a common place to have one mounted. Attached Images __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

01-30-2012, 10:42 AM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Fuel filter location fuel filter between pump and carb has been proven to b the best way// having fuel filter b4 the pump makes pump work harder and is less reliable __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-30-2012, 11:29 AM	#6
tekno62 Registered User Join Date: Nov 2008 Location: San Jose Ca Posts: 265	Re: Fuel filter location thanks for the fast replys - I was hoping you all could post pictures of your installs for me.

01-30-2012, 12:09 PM	#7
hayhauler71 Registered User Join Date: Aug 2009 Location: St. Paul MN. Posts: 1,996	Re: Fuel filter location one under the tank where the rubber hose goes to the steel line on frame and one near the carb Attached Images __________________ Fuzzy

01-30-2012, 12:44 PM	#8
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: Fuel filter location I have one under the carb. Works for me. Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

01-30-2012, 04:56 PM	#9
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Fuel filter location I always put one between the tank & pump unless I have a new tank. Grit can get in the fuel pump check valves & cause failure. Its good to have one in the carb inlet or in the line between the pump & carb like Hayhauler says.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.