The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-28-2012, 10:43 PM   #1
jesse977
Registered User
 
jesse977's Avatar
 
Join Date: Jun 2004
Location: Los Angeles
Posts: 277
BF Goodrich t/a question..

Im running a american racing wheels -19 offset 15x8 on the front of my 74 swb gmc with 265/50/15 BF Goodrich T/A tires. I have a little rubbing since I have a 4 or 5 inch drop. I would like to get tires that arent so wide. Maybe a 235 or 245. My question is does BF Goodrich make these sizes? On thier website they dont have many T/A tires with a 50 aspect ratio. I dont want to get 60 aspect ratio. What other brand of tire is most similar to BFG's T/A's? Thanks
jesse977 is offline   Reply With Quote
Old 01-28-2012, 11:05 PM   #2
usmcchevy
Has more rust than truck...
 
usmcchevy's Avatar
 
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
Re: BF Goodrich t/a question..

I use this:
http://www.1010tires.com/tiresizecalculator.asp

It allows you to compare sizes and it will list the tires available in that size at the bottom. I'm sure it doesn't list all brands, but gives you a start.
__________________
1972 Custom/10 SWB, 4.8/4l80e
Build thread

LSx Swap FAQ index
usmcchevy is offline   Reply With Quote
Old 01-29-2012, 12:05 AM   #3
oldspowered67C10
Registered User
 
Join Date: Jan 2006
Location: Cherry Valley,Ca
Posts: 468
Re: BF Goodrich t/a question..

I always go to tirerack.com and search by tire size.
oldspowered67C10 is offline   Reply With Quote
Old 01-29-2012, 01:37 AM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: BF Goodrich t/a question..

Quote:
Originally Posted by jesse977 View Post
Im running a american racing wheels -19 offset 15x8 on the front of my 74 swb gmc with 265/50/15 BF Goodrich T/A tires. I have a little rubbing since I have a 4 or 5 inch drop. I would like to get tires that arent so wide. Maybe a 235 or 245. My question is does BF Goodrich make these sizes? On thier website they dont have many T/A tires with a 50 aspect ratio. I dont want to get 60 aspect ratio. What other brand of tire is most similar to BFG's T/A's? Thanks
Why not is the question??
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 01-29-2012, 03:05 AM   #5
jesse977
Registered User
 
jesse977's Avatar
 
Join Date: Jun 2004
Location: Los Angeles
Posts: 277
Re: BF Goodrich t/a question..

The reason I dont want to get 60's is because the rears are 295/50/15 and they are pretty new. I just want to change out the fronts and want them to match.
jesse977 is offline   Reply With Quote
Old 01-29-2012, 03:52 AM   #6
jesse977
Registered User
 
jesse977's Avatar
 
Join Date: Jun 2004
Location: Los Angeles
Posts: 277
Re: BF Goodrich t/a question..

Quote:
Originally Posted by SCOTI View Post
Why not is the question??
will a 295/50/15 be the same height as a 245/60/15?
jesse977 is offline   Reply With Quote
Old 01-29-2012, 04:03 AM   #7
oldspowered67C10
Registered User
 
Join Date: Jan 2006
Location: Cherry Valley,Ca
Posts: 468
Re: BF Goodrich t/a question..

Quote:
will a 295/50/15 be the same height as a 245/60/15?
Real close, 295 is a bit taller, BFG specs them as 26.7" and 26.6" overall diameter.
oldspowered67C10 is offline   Reply With Quote
Old 01-29-2012, 03:15 PM   #8
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: BF Goodrich t/a question..

Quote:
Originally Posted by jesse977 View Post
will a 295/50/15 be the same height as a 245/60/15?
Quote:
Originally Posted by oldspowered67C10
Real close, 295 is a bit taller, BFG specs them as 26.7" and 26.6" overall diameter.
Like oldspowered67C10 stated, BFG lists the 295 as a little taller but they're about equal mathmatically.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 01-29-2012, 03:30 PM   #9
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,254
Re: BF Goodrich t/a question..

295/50 and 245/60 look good. Together
Posted via Mobile Device
__________________
" That didnt make it any newer "
" Dont antique the equipment "
KQQL IT is offline   Reply With Quote
Old 01-31-2012, 12:37 AM   #10
jesse977
Registered User
 
jesse977's Avatar
 
Join Date: Jun 2004
Location: Los Angeles
Posts: 277
Re: BF Goodrich t/a question..

Quote:
Originally Posted by KQQL IT View Post
295/50 and 245/60 look good. Together
Posted via Mobile Device
If the fronts are 60 and the rears are 50 wont it look a little uneven? I currently have 265 50 in the front and 295 50 in the rear and to me it looks awesome. The fronts rub just a little bit. I guess ill just buy some spacers. Why doesnt bf goodrich make 245 50 to match the 295 50 or 295 60 to match all the 60 tires?
Posted via Mobile Device
jesse977 is offline   Reply With Quote
Old 01-31-2012, 01:42 AM   #11
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,254
Re: BF Goodrich t/a question..

Ill look when i get home. Im sure i have a pic with 295 and 245s on 8s and 10s if you go back to my old posts youll see a pic of it. The idewalls are all most identical.
Posted via Mobile Device
__________________
" That didnt make it any newer "
" Dont antique the equipment "
KQQL IT is offline   Reply With Quote
Old 01-31-2012, 08:26 AM   #12
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: BF Goodrich t/a question..

Quote:
Originally Posted by jesse977 View Post
If the fronts are 60 and the rears are 50 wont it look a little uneven? I currently have 265 50 in the front and 295 50 in the rear and to me it looks awesome. The fronts rub just a little bit. I guess ill just buy some spacers. Why doesnt bf goodrich make 245 50 to match the 295 50 or 295 60 to match all the 60 tires?
There's more to overall height than just the 60 vs 50 aspect ratios. Do the math:

50% of 295mm = 147.5mm
60% of 245mm = 147mm

Pretty close....
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 01-31-2012, 03:32 PM   #13
tubbedII
needs more $$$
 
tubbedII's Avatar
 
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
Re: BF Goodrich t/a question..

Quote:
Originally Posted by SCOTI View Post
There's more to overall height than just the 60 vs 50 aspect ratios. Do the math:

50% of 295mm = 147.5mm
60% of 245mm = 147mm

Pretty close....
It took me a long time to understand this about tire sizes for some reason...
__________________
1970 2wd Blazer
tubbedII is offline   Reply With Quote
Old 01-31-2012, 06:22 PM   #14
jesse977
Registered User
 
jesse977's Avatar
 
Join Date: Jun 2004
Location: Los Angeles
Posts: 277
Re: BF Goodrich t/a question..

cool I guess ill go buy some 245 60, thanks guys for the advice.
jesse977 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com