NJ Roof Panel with Cab Lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUCKTRUCK · 01-10-2012, 09:07 PM

Roof Panel with cab lights. Spot welds have been drilled out around rain gutter edge, and cut was made behind rear seam to remove. Paint is original, so no hidden bondo. Has about a 6" long crease on driver side that could easily be hammered out. 3 lenses are crap, 1 is fair and 1 is near perfect. Has some surface rust on top where something spilled and ate into paint. Underside also has some surface rust but nothing major. Harness included.

$75. picked up in central Jersey, no shipping

Also have 5 NOS lenses and 5 aftermarket gaskets that I will offer to the buyer of the roof for an additional $100.

CG · 01-10-2012, 10:34 PM

Nice job taking that off and a pretty darn good deal on the whole set up. If that was for sale here I would pick it up for sure , and I have no need for it lol.

rusty knuckles 5 · 01-10-2012, 11:32 PM

nice job how would spot weld the back seam back on to the cab? would you have to remove the inner panel to be able to spot weld it back in , what is the best way? thank you for the picture it is worth a thousand words

LUCKTRUCK · 01-11-2012, 12:30 AM

Quote:

Originally Posted by rusty knuckles 5

nice job how would spot weld the back seam back on to the cab? would you have to remove the inner panel to be able to spot weld it back in , what is the best way? thank you for the picture it is worth a thousand words

I would actually cut the seam off of this panel, then cut the roof that is on the truck about an inch ahead of the seam, and then weld together from outside, then grind, hammer and fill.

I've seen guys cut these panels right down the center and weld back together from outside. I think that it would be better to weld closer to the seam (strong point) to avoid warpage.

BrianS · 01-11-2012, 05:21 PM

I'll buy the lenses if you'd separate.
Posted via Mobile Device

**t korinek** · 01-12-2012, 01:13 AM

I'd be interested in the cab lights & gaskets as well, if you sell em separate.
Thanks,
Tom

LUCKTRUCK · 01-12-2012, 02:21 PM

I'm not ready to seperate the NOS lenses yet. I would like to offer to the buyer of the roof first. But I will keep you guys in mind.

gmclonghorn · 01-12-2012, 02:37 PM

I'll take it and pay shipping and handling if you ship to 92683. Let me know if you change your mind thanks
Posted via Mobile Device

LUCKTRUCK · 01-23-2012, 09:29 AM

TTT- still for sale

**bignbad** · 01-23-2012, 07:56 PM

interested,if gmclonghorn passes.Where at in jersey?

LUCKTRUCK · 01-24-2012, 12:43 AM

Quote:

Originally Posted by bignbad

interested,if gmclonghorn passes.Where at in jersey?

bignbad, gmclonghorn was interested if I was willing to ship, but I do not want to ship, so you are up. I'm in Edison NJ, about 2.5 hrs from Carlisle.

**bignbad** · 01-24-2012, 08:11 PM

Pm sent

LUCKTRUCK · 02-03-2012, 02:17 PM

roof panel- sold to bignbad

lenses and gaskets- sale pending with bignbad

01-10-2012, 09:07 PM	#1
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Roof Panel with Cab Lights Roof Panel with cab lights. Spot welds have been drilled out around rain gutter edge, and cut was made behind rear seam to remove. Paint is original, so no hidden bondo. Has about a 6" long crease on driver side that could easily be hammered out. 3 lenses are crap, 1 is fair and 1 is near perfect. Has some surface rust on top where something spilled and ate into paint. Underside also has some surface rust but nothing major. Harness included. $75. picked up in central Jersey, no shipping Also have 5 NOS lenses and 5 aftermarket gaskets that I will offer to the buyer of the roof for an additional $100. __________________ LUCKTRUCK

01-10-2012, 10:34 PM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Roof Panel with Cab Lights Nice job taking that off and a pretty darn good deal on the whole set up. If that was for sale here I would pick it up for sure , and I have no need for it lol. __________________ … … … … … … … … ... … … … … … … … … … … …

01-10-2012, 11:32 PM	#3
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: Roof Panel with Cab Lights nice job how would spot weld the back seam back on to the cab? would you have to remove the inner panel to be able to spot weld it back in , what is the best way? thank you for the picture it is worth a thousand words

01-11-2012, 05:21 PM	#5
BrianS Registered User Join Date: Dec 2010 Location: Omaha nebraksa Posts: 55	Re: Roof Panel with Cab Lights I'll buy the lenses if you'd separate. Posted via Mobile Device

01-12-2012, 01:13 AM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Roof Panel with Cab Lights I'd be interested in the cab lights & gaskets as well, if you sell em separate. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

01-12-2012, 02:21 PM	#7
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Re: Roof Panel with Cab Lights I'm not ready to seperate the NOS lenses yet. I would like to offer to the buyer of the roof first. But I will keep you guys in mind. __________________ LUCKTRUCK

01-12-2012, 02:37 PM	#8
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: Roof Panel with Cab Lights I'll take it and pay shipping and handling if you ship to 92683. Let me know if you change your mind thanks Posted via Mobile Device

01-23-2012, 09:29 AM	#9
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Re: Roof Panel with Cab Lights TTT- still for sale __________________ LUCKTRUCK

01-23-2012, 07:56 PM	#10
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: Roof Panel with Cab Lights interested,if gmclonghorn passes.Where at in jersey? __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

01-24-2012, 08:11 PM	#12
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: Roof Panel with Cab Lights Pm sent __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

02-03-2012, 02:17 PM	#13
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Re: Roof Panel with Cab Lights roof panel- sold to bignbad lenses and gaskets- sale pending with bignbad __________________ LUCKTRUCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.