WTB 67-68 headlight bezels and need the fender front corners - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**joedoh** · 12-17-2011, 11:02 PM

looking for some shiny headlight bezels for 67-68 and would also like to see if anyone would cut the front corners off a set of junk fenders for me. This is for putting the 67-68 grille on my 65 so I dont need the whole fender, just the corners that match up to the grille steel, and if you have a couple ruin fenders (rust or damage) with good front corners, this is a chance to sell em and ship them in a flat rate USPS box, when is the last time you did that with some fenders?

I have the 67 grille and shiny grille trim already. yes I know it wont bolt up. yes I know that it will take a lot of fabrication. any part help appreciated.

**joedoh** · 12-28-2011, 11:18 PM

got some bezels coming, still need the fender corners. someone has to have a couple that are rusted over or behind the wheels, I just want the front 2-3 inches.

oldblue1968chevy · 12-28-2011, 11:42 PM

I have a passenger side painted headlight bezel.

**joedoh** · 12-29-2011, 12:59 AM

thanks but I dont need the bezels any longer, just the fender corners.

**Todd68Chevy** · 02-05-2012, 09:39 AM

Are you still looking? I might have something that will work but the fenders do have rust in the front cup area. I can get some pictures.

**DaHos** · 02-05-2012, 10:39 AM

Not sure how much you need but I have this.

**Todd68Chevy** · 02-05-2012, 03:59 PM

Here are some pictures of what I have. In the third picture I was trying to show the dent in the left fender but shows up better in the second picture.

12-17-2011, 11:02 PM	#1
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	WTB 67-68 headlight bezels and need the fender front corners looking for some shiny headlight bezels for 67-68 and would also like to see if anyone would cut the front corners off a set of junk fenders for me. This is for putting the 67-68 grille on my 65 so I dont need the whole fender, just the corners that match up to the grille steel, and if you have a couple ruin fenders (rust or damage) with good front corners, this is a chance to sell em and ship them in a flat rate USPS box, when is the last time you did that with some fenders? I have the 67 grille and shiny grille trim already. yes I know it wont bolt up. yes I know that it will take a lot of fabrication. any part help appreciated. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

12-28-2011, 11:18 PM	#2
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: WTB 67-68 headlight bezels and need the fender front corners got some bezels coming, still need the fender corners. someone has to have a couple that are rusted over or behind the wheels, I just want the front 2-3 inches. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

12-28-2011, 11:42 PM	#3
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: WTB 67-68 headlight bezels and need the fender front corners I have a passenger side painted headlight bezel. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-29-2011, 12:59 AM	#4
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: WTB 67-68 headlight bezels and need the fender front corners thanks but I dont need the bezels any longer, just the fender corners. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

02-05-2012, 09:39 AM	#5
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB 67-68 headlight bezels and need the fender front corners Are you still looking? I might have something that will work but the fenders do have rust in the front cup area. I can get some pictures. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-05-2012, 10:39 AM	#6
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: WTB 67-68 headlight bezels and need the fender front corners Not sure how much you need but I have this. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-05-2012, 03:59 PM	#7
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: WTB 67-68 headlight bezels and need the fender front corners Here are some pictures of what I have. In the third picture I was trying to show the dent in the left fender but shows up better in the second picture. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 02-05-2012 at 04:01 PM. Reason: Added description



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.