Brake line adapters... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boraxman · 09-08-2003, 01:16 PM

I am using a '72 master cyl/booster in a '70 c10. Of course the brake lines wont screw right into the prop. valve. Anyone happen to know what size adapters to use, would be female to male.

Fred T · 09-08-2003, 02:48 PM

I'm thinking 1/4 to 5/16, but not sure. Measure the outer diameter of the fitting on the brake line, take that and your prop valve to the parts store, they should be able to fix you up.

09-08-2003, 01:16 PM	#1
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	Brake line adapters... I am using a '72 master cyl/booster in a '70 c10. Of course the brake lines wont screw right into the prop. valve. Anyone happen to know what size adapters to use, would be female to male. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

09-08-2003, 02:48 PM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	I'm thinking 1/4 to 5/16, but not sure. Measure the outer diameter of the fitting on the brake line, take that and your prop valve to the parts store, they should be able to fix you up. __________________ Fred There is no such thing as too much cam...just not enough engine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.