Two quick bench seat questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

burbluv · 02-13-2012, 04:00 PM

Anyone know what size bolts work when fastening the bench seat to a truck and also could someone put 3 seat belts across one bench seat?
Thanks

forestb · 02-13-2012, 05:28 PM

I don't know the bolt size. But when I got my 62 it had 2 shoulder belts and a lap belt in the center. It was bolted to the floor at the same point as the buckles for the shoulder belts. I think the P.O. did this. I would not recommend it. I wold not want to be sitting in that center seat if there were an accident. No head rest and only a dashboard to stop your head.

1963c-10 · 02-13-2012, 05:41 PM

You can add a 3rd belt to the bench seat...just be sure to get the proper mounting hardware.

jimmydean · 02-13-2012, 05:44 PM

I bought a middle seat belt for mine that was a near exact match for my stock lap belt for less than $30. I double stacked the inside anchor points without issue for the middle belt. That's how it's done in a lot of vehicles.

02-13-2012, 04:00 PM	#1
burbluv Registered User Join Date: Jan 2011 Location: San Ramon California Posts: 325	Two quick bench seat questions Anyone know what size bolts work when fastening the bench seat to a truck and also could someone put 3 seat belts across one bench seat? Thanks

02-13-2012, 05:28 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,592	Re: Two quick bench seat questions I don't know the bolt size. But when I got my 62 it had 2 shoulder belts and a lap belt in the center. It was bolted to the floor at the same point as the buckles for the shoulder belts. I think the P.O. did this. I would not recommend it. I wold not want to be sitting in that center seat if there were an accident. No head rest and only a dashboard to stop your head.

02-13-2012, 05:41 PM	#3
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Two quick bench seat questions You can add a 3rd belt to the bench seat...just be sure to get the proper mounting hardware. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-13-2012, 05:44 PM	#4
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Two quick bench seat questions I bought a middle seat belt for mine that was a near exact match for my stock lap belt for less than $30. I double stacked the inside anchor points without issue for the middle belt. That's how it's done in a lot of vehicles. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.