![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2010
Location: sanford nc
Posts: 499
|
01 silverado 4.8 knocking
Hey guys, Im from the 60-66 C10 forum room mostly. I have been having problems with my DD for a while now. Its a 01 silverado ext cab 2 wheel drive with the 4.8 engine. For the last about 2 years every time I start it after sitting for several hours the motor has a bad KNOCKING sound. It goes away right after the motor warms up for about 3 or 4 minutes. Ive heard alot of problems with this and chevrolet says it will not hurt anything. The truck only has 95,000 miles on it with regular oil changes every 3500 miles. What is causing this and is there anything to do to fix it??? Thanks!!
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Has more rust than truck...
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
|
Re: 01 silverado 4.8 knocking
Sounds like Cold Start Knock. I've had them do it when the temp drops below 50, but in the summer they are fine. Sucking a bottle of seafoam through the brake booster hose seems to help it short term, but no long term fix. Does the oil press fluctuate while its knocking?
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2007
Location: Sask Canada
Posts: 1,666
|
Re: 01 silverado 4.8 knocking
Gm calls it piston slap. I hope it has a WIX 51522 or a AC DELCO PF46 oil filter.
__________________
Trueman |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: 01 silverado 4.8 knocking
Cold piston slap on Gen III engines is normal, I had a 97 Corvette LS1 that would sound like it was coming apart untill it warmed up.
If it takes a little while to build oil pressure & the rods are rattling, The O-ring on the oil pump pick-up needs to be changed. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2010
Location: sanford nc
Posts: 499
|
Re: 01 silverado 4.8 knocking
Thanks for replys guys. The oil pressure stays way up the whole time like on 60. I normally run a AC delco filter or a wix from carquest. not sure of the part numbers of the filters.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2010
Location: elora tn
Posts: 121
|
Re: 01 silverado 4.8 knocking
Yep like the others said it is a common thing. My truck does it. You are also changing your oil too much. It is not hurting anything, but it is not helping anything either, just hurts your wallet.
__________________
2001 GMC 2WD, 1998 Chevy K2500 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2005
Location: Branchville SC
Posts: 1,647
|
Re: 01 silverado 4.8 knocking
Normal. Its piston slap.
__________________
2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks.. |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: 01 silverado 4.8 knocking
its normal always runa good brand filter wix ac delco or purealtor
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
![]() |
![]() |
![]() |
Bookmarks |
|
|