Todays Pull a Part find - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JRANGER · 02-18-2012, 10:41 PM

A nice dash pad with 2 small cracks on the top..also got a wiper switch and a wire for the bottom of the bench that attaches to the adjustment lever...$27

Decided to run a little sealer in the cracks, sand, clean, and paint with dupli vinyl and fabric...

Turned out a little bit more glossy then i hoped but i guess thats how im going to have to do the hole interior now lol
Hopefully after it drys more it will be a lil more dull

sixshooter798 · 02-19-2012, 03:17 PM

Yeah I learned to use only the "flat" black vinyl dyes...still looks awesome tho!

JRANGER · 02-19-2012, 03:22 PM

yeah, I just wasnt paying attention but It turned out well so I am going to stick with it for the full truck....$7 a can isnt bad....I put 3 coats on it and for $30 its perfect!!!

Hoods69BadBowTie · 02-19-2012, 03:59 PM

Cool score looks like it turned out pretty good for the most part

JRANGER · 02-19-2012, 05:29 PM

yeah, it almost looks like new other then the mesh part....Which doesnt bother me one bit

02-18-2012, 10:41 PM	#1
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Todays Pull a Part find A nice dash pad with 2 small cracks on the top..also got a wiper switch and a wire for the bottom of the bench that attaches to the adjustment lever...$27 Decided to run a little sealer in the cracks, sand, clean, and paint with dupli vinyl and fabric... Turned out a little bit more glossy then i hoped but i guess thats how im going to have to do the hole interior now lol Hopefully after it drys more it will be a lil more dull Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper Last edited by JRANGER; 02-18-2012 at 11:10 PM.

02-19-2012, 03:17 PM	#2
sixshooter798 Desert Rat Join Date: Jul 2010 Location: Mojave Desert Posts: 169	Re: Todays Pull a Part find Yeah I learned to use only the "flat" black vinyl dyes...still looks awesome tho!

02-19-2012, 03:22 PM	#3
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Todays Pull a Part find yeah, I just wasnt paying attention but It turned out well so I am going to stick with it for the full truck....$7 a can isnt bad....I put 3 coats on it and for $30 its perfect!!! __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

02-19-2012, 03:59 PM	#4
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Todays Pull a Part find Cool score looks like it turned out pretty good for the most part __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

02-19-2012, 05:29 PM	#5
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Todays Pull a Part find yeah, it almost looks like new other then the mesh part....Which doesnt bother me one bit __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.