WTB: '68 drvr side 4x4 ramhorn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Charlie Coleman · 09-10-2003, 04:24 PM

JBarlow is looking for the driver side exhaust mainfold for a '68 4x4. Thanks

J.Lance · 09-10-2003, 04:42 PM

would he take an a.i.r. manifold? I want to round up some non-a.i.r. manifolds for my '68 so I'd be swapping over. It's the correct manifold for '68 with the casting for the altenator bracket. Let me know and I'll check with Marv to see if he has a set for me or maybe even a couple.

Charlie Coleman · 09-10-2003, 04:47 PM

He says that will work.....how much? Thanks Jason

J.Lance · 09-10-2003, 04:53 PM

Just talked to Marv and he thinks he probably has a set. I'll be down there tomorrow and I'll check for sure. Marv said he usually gets $65 to $70 a peice but I'll probably make out at less than half that since he's a friend. How does $25 sound for the drivers side? Would he rather have a non air? If so I'll check if there are two, would cost closer to the $65 though cause it won't be comming from me.

Charlie Coleman · 09-10-2003, 05:10 PM

I left Jesse a message....waiting on his reply.

J.Lance · 09-10-2003, 05:16 PM

Go ahead and give me a call when you know the details. How soon does he need it?

Charlie Coleman · 09-10-2003, 05:16 PM

Jason,

He will take you driver side for $25. Thanks

J.Lance · 09-10-2003, 05:20 PM

Not a problem, I'll have it off as soon as he needs it. If I happen to bust out the sand blaster for anything I'll even shoot it. It's in clean shape but I put some bad paint on it originally and it's flaking.

Charlie Coleman · 09-10-2003, 05:21 PM

Jason,

Call Jesse at 303-507-5526. I can't find your number to pass it on.

09-10-2003, 04:24 PM	#1
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	WTB: '68 drvr side 4x4 ramhorn JBarlow is looking for the driver side exhaust mainfold for a '68 4x4. Thanks

09-10-2003, 04:42 PM	#2
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	ram horn would he take an a.i.r. manifold? I want to round up some non-a.i.r. manifolds for my '68 so I'd be swapping over. It's the correct manifold for '68 with the casting for the altenator bracket. Let me know and I'll check with Marv to see if he has a set for me or maybe even a couple. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

09-10-2003, 04:53 PM	#4
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	manifold Just talked to Marv and he thinks he probably has a set. I'll be down there tomorrow and I'll check for sure. Marv said he usually gets $65 to $70 a peice but I'll probably make out at less than half that since he's a friend. How does $25 sound for the drivers side? Would he rather have a non air? If so I'll check if there are two, would cost closer to the $65 though cause it won't be comming from me. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

09-10-2003, 05:16 PM	#6
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	manifold Go ahead and give me a call when you know the details. How soon does he need it? __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

09-10-2003, 05:20 PM	#8
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	manifold Not a problem, I'll have it off as soon as he needs it. If I happen to bust out the sand blaster for anything I'll even shoot it. It's in clean shape but I put some bad paint on it originally and it's flaking. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

09-10-2003, 04:47 PM	#3
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	He says that will work.....how much? Thanks Jason

09-10-2003, 05:10 PM	#5
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	I left Jesse a message....waiting on his reply.

09-10-2003, 05:21 PM	#9
Charlie Coleman Registered User Join Date: Jun 2000 Location: Franktown, CO. USA Posts: 533	Jason, Call Jesse at 303-507-5526. I can't find your number to pass it on.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.