Canada Parting out '78 K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68chevyfuelie · 02-12-2012, 02:25 PM

Everythings for sale! Ask if you're interested.

14 bolt full float rear, one bolt broken in yoke, one drum seized, 3.73 open, gears look nice $300
Dana 44 front, internal style hubs, 3.73 open, gears look nice, everything is free, $300
Steering gearbox, core, $25
One non-tilt column, auto, $25, has a key!!
Hood looks decent- $50
Driveshafts are both there, $25 each
TH350, 2wd case, 4wd output shaft, been rebuilt at some point, $50
NP203, $50
TH350-NP203 adapter plate- $40
Front turn signal, with chrome, $10, spoken for pending payment
Front markers, $25/pair, spoken for pending payment
SBC engine stands, $40/pair
Front sway bar, crossmember and upper spring plates, $75
Tranny crossmember, $75 (not completely inspected, but looked solid, couple to choose from anyway)
Grill, grill trim and bezels, $40, pending payment

madcow75 · 02-12-2012, 10:49 PM

Now thats a Canadian truck.

Good luck with sales

68chevyfuelie · 02-13-2012, 12:04 AM

It's not THAT bad....

But thanks for the encouragement.

I mean, a little body work here and there, toss a 350 in it, maybe change the cab, toss a new front clip on it, change the body mounts, newer box, tailgate, go through the tranny and case, put some brakes on it, and you've got a really nice truck to drive for a while.......

d5a1t0 · 02-13-2012, 02:58 PM

Hi there, I am interested on the grille and sign marks. I have PM you some questions regarding the parts. Thank you.

THE "10" SILVERADO · 02-13-2012, 07:11 PM

What the h*ll happened to that? Get run over by a semi?

68chevyfuelie · 02-13-2012, 11:41 PM

TH400 and NP203 combo- $150 as is, SOLD

14 bolt looks like 3.73's, and gears look nice from what I can see. One brake drum is seized up.

madcow75 · 02-13-2012, 11:47 PM

went to town on her allready

Dalaigh · 02-17-2012, 05:57 PM

What is the condition of the front leaf spring mounts? Any pics? I might be interested if they are solid.

Rogue_Sentinel · 02-17-2012, 07:29 PM

pm

68chevyfuelie · 02-18-2012, 09:26 PM

Quote:

Originally Posted by Dalaigh

What is the condition of the front leaf spring mounts? Any pics? I might be interested if they are solid.

Front-front, or front-rear mounts?

68chevyfuelie · 02-19-2012, 11:35 AM

Quote:

Originally Posted by d5a1t0

Hi there, I am interested on the grille and sign marks. I have PM you some questions regarding the parts. Thank you.

Pics of parts you're interested in. Bottom trim has a couple dents. Both came off without breaking studs. One fender lens was broken, but I have another pair. And the RH front turn signal was broken, as I told you, but I can include it if you want it. The chrome trim still looks decent on it.

$40 for grill/bezels/upper and lower trim (I'd quoted you $30 for grill and bezels only)
$25 front marker/pair
$10 front turn signal/pair

I'll get a shipping quote figured out later today to 77057. Thanks.

kellytheaker · 02-19-2012, 11:43 AM

i have not heard on those vents , anything around for a nice 87

d5a1t0 · 02-19-2012, 11:46 AM

Quote:

Originally Posted by 68chevyfuelie

Pics of parts you're interested in. Bottom trim has a couple dents. Both came off without breaking studs. One fender lens was broken, but I have another pair. And the RH front turn signal was broken, as I told you, but I can include it if you want it. The chrome trim still looks decent on it.

$40 for grill/bezels/upper and lower trim (I'd quoted you $30 for grill and bezels only)
$25 front marker/pair
$10 front turn signal/pair

I'll get a shipping quote figured out later today to 77057. Thanks.

Thanks.

68chevyfuelie · 02-19-2012, 11:55 AM

Quote:

Originally Posted by Rogue_Sentinel

pm

PM was sent regarding seatbelts and visors. The ones on this truck were junk, but I have others on the shelf from a '77 K10. Seat belts are kinda scuzzy but seem to work, visors are driver quality as well. I don't know, $25/pair on the visors, $20/pair for the belts. If you're interested I'll get you a price to 27030. Thanks.

Dalaigh · 02-19-2012, 12:27 PM

Quote:

Originally Posted by 68chevyfuelie

Front-front, or front-rear mounts?

I'm looking for the front axle Spring mounts, they look like they are in good condition. Any idea what you want for them? I can pick them up, I'm in Sarnia, I just had to make the time to get up there.

68chevyfuelie · 02-19-2012, 05:43 PM

Quote:

Originally Posted by d5a1t0

Thanks.

Shipping looks like about $80 for everything to go in one box. Thanks.

68chevyfuelie · 02-19-2012, 05:45 PM

Quote:

Originally Posted by Dalaigh

I'm looking for the front axle Spring mounts, they look like they are in good condition. Any idea what you want for them? I can pick them up, I'm in Sarnia, I just had to make the time to get up there.

$30 for the front spring mounts would be fine, just enough to cover my time and cost of running the torches. I could probably ship them to Sarnia for $15-20 to save you some gas, it's your call. Thanks.

d5a1t0 · 02-19-2012, 05:58 PM

Quote:

Originally Posted by 68chevyfuelie

Shipping looks like about $80 for everything to go in one box. Thanks.

Okay...please pm me the payment detail. Thx.

Liddy71 · 02-20-2012, 04:36 AM

passenger side windsheild post ship to 25570

Dalaigh · 02-20-2012, 09:59 AM

Quote:

Originally Posted by 68chevyfuelie

$30 for the front spring mounts would be fine, just enough to cover my time and cost of running the torches. I could probably ship them to Sarnia for $15-20 to save you some gas, it's your call. Thanks.

It's ok, I've got a buddy up there I've been meaning to visit. I'll PM you when I head up that way. Are you available through the week?

68chevyfuelie · 02-20-2012, 10:18 AM

Quote:

Originally Posted by Liddy71

passenger side windsheild post ship to 25570

The A pillar? Already gone, sorry, it was cut in half with a sawzall the first day.

68chevyfuelie · 02-20-2012, 10:19 AM

Quote:

Originally Posted by Dalaigh

It's ok, I've got a buddy up there I've been meaning to visit. I'll PM you when I head up that way. Are you available through the week?

Sounds good, PM sent with contact info. Thanks.

Chevytrux4me · 02-24-2012, 06:20 AM

how are the drip rails / rain gutters and trim?

68chevyfuelie · 02-24-2012, 09:45 AM

Quote:

Originally Posted by Chevytrux4me

how are the drip rails / rain gutters and trim?

Gone, sorry.

02-12-2012, 02:25 PM	#1
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Parting out '78 K20 Everythings for sale! Ask if you're interested. 14 bolt full float rear, one bolt broken in yoke, one drum seized, 3.73 open, gears look nice $300 Dana 44 front, internal style hubs, 3.73 open, gears look nice, everything is free, $300 Steering gearbox, core, $25 One non-tilt column, auto, $25, has a key!! Hood looks decent- $50 Driveshafts are both there, $25 each TH350, 2wd case, 4wd output shaft, been rebuilt at some point, $50 NP203, $50 TH350-NP203 adapter plate- $40 Front turn signal, with chrome, $10, spoken for pending payment Front markers, $25/pair, spoken for pending payment SBC engine stands, $40/pair Front sway bar, crossmember and upper spring plates, $75 Tranny crossmember, $75 (not completely inspected, but looked solid, couple to choose from anyway) Grill, grill trim and bezels, $40, pending payment Attached Images Last edited by 68chevyfuelie; 02-23-2012 at 09:21 PM.

02-12-2012, 10:49 PM	#2
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out '78 K20 Now thats a Canadian truck. Good luck with sales

02-13-2012, 12:04 AM	#3
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Parting out '78 K20 It's not THAT bad.... But thanks for the encouragement. I mean, a little body work here and there, toss a 350 in it, maybe change the cab, toss a new front clip on it, change the body mounts, newer box, tailgate, go through the tranny and case, put some brakes on it, and you've got a really nice truck to drive for a while.......

02-13-2012, 02:58 PM	#4
d5a1t0 Registered User Join Date: Feb 2012 Location: Houston, TX Posts: 17	Re: Parting out '78 K20 Hi there, I am interested on the grille and sign marks. I have PM you some questions regarding the parts. Thank you.

02-13-2012, 07:11 PM	#5
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: Parting out '78 K20 What the h*ll happened to that? Get run over by a semi? __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

02-13-2012, 11:41 PM	#6
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: Parting out '78 K20 TH400 and NP203 combo- $150 as is, SOLD 14 bolt looks like 3.73's, and gears look nice from what I can see. One brake drum is seized up. Attached Images Last edited by 68chevyfuelie; 02-25-2012 at 01:07 PM.

02-13-2012, 11:47 PM	#7
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out '78 K20 went to town on her allready

02-17-2012, 05:57 PM	#8
Dalaigh Canadian Trucker Join Date: Nov 2010 Location: Sarnia, ont canada Posts: 648	Re: Parting out '78 K20 What is the condition of the front leaf spring mounts? Any pics? I might be interested if they are solid. __________________ 2020 Silverado Trail Boss - 6.2/10spd

02-17-2012, 07:29 PM	#9
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting out '78 K20 pm __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

02-19-2012, 11:43 AM	#12
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Parting out '78 K20 i have not heard on those vents , anything around for a nice 87

02-20-2012, 04:36 AM	#19
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out '78 K20 passenger side windsheild post ship to 25570

02-24-2012, 06:20 AM	#23
Chevytrux4me Certified Gearhead Join Date: Feb 2007 Location: Athens, West Virginia Posts: 186	Re: Parting out '78 K20 how are the drip rails / rain gutters and trim? __________________ "I drive my pickup into the big city, 'n write my room number right on the bottom o' my boot. Jus' so I don't forget where I live. That's right, y'all. That's how I roll!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.