VA Parting 71 gmc lb - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 02-21-2012, 06:29 PM

I'd like to get in line for the rolling chassis with the cab on it.

TDBFIXIT · 02-21-2012, 08:34 PM

Quote:

Originally Posted by VA72C10

I'd like to get in line for the rolling chassis with the cab on it.

Critterman passed on the rolling chassis ($175), so now you are 1st on it. Pic coming next on the firewall for "cdp" as per an earlier post. Not sure if that puts him first on the cab, we might be walking the thin line here. Please note that the steering column and box are committed to a CL buyer from awhile back. Also, still have not pulled the motor/trans. Need to line up some help. Will keep everyone informed pending responses. Thanks David

TDBFIXIT · 02-21-2012, 08:37 PM

PIC. of firewall as requested by "cdp" cab is SOLD and pending to CDP

Steering and brake booster are committed to a CL buyer

Critterman71 · 02-21-2012, 10:02 PM

I will pass on the mirrors any info on the Drip rail molding yet I think I am second inline for those as well also interested in door edge guards.

TDBFIXIT · 02-22-2012, 08:07 AM

Quote:

Originally Posted by Critterman71

I will pass on the mirrors any info on the Drip rail molding yet I think I am second inline for those as well also interested in door edge guards.

See post #1, #2 and #49 about the drip molding and door edges. Send a check if you are good on the door edges. I think I sent you my address already
Thanks

**va72longhorn** · 02-22-2012, 09:27 AM

Hey David, you may want to consider putting a time limit on some of this stuff. If the cab gets passed on, you have an oppourtunuity to sell it, the frame, and possibly the engine as a package to the next in line. A 350 block has more value to the guy who wants the frame and cab (numbers still match and they get the title with the cab) than it does to anyone else. 350 engines (that need rebuilding) are a dime a dozen and youd be surprised how many are sitting under a garage workshop table. In addition, it saves you alot of labor pulling parts that you dont need to. We dont do "auction" style buying on here, but you dont like waiting a week for someone to say "I'll pass on it" before youre next in line. Once you get a definite "I'll take it", the amount of time it takes to get you paid is between you and the buyer. At that point, the second in line knows that its gone and they can look elsewhere. Im sure there are some that disagree with me, but its just my 2 pennies.

TDBFIXIT · 02-22-2012, 10:53 AM

Ron, I appreciate the quality input. Didn't know about the "numbers matching" point.

But, CDP is now firm about the cab (he expressed interest in posts prior to VA72C10) That puts VA72C10 1st on the rolling chassis, by itself, if he wants it. I am working out the details w/ CDP on the cab and will update when the chassis is ready.

TDBFIXIT · 02-22-2012, 11:32 AM

Ron, (va72longhorn) Kelly has passed on the paint divider and the antenna. You are now 1st on both.

DeputyDan - Kelly has passed on the used moldings. I will figure shipping to 65101 and let you know.

**va72longhorn** · 02-22-2012, 01:36 PM

I'll take them both. Put them with the hood. Fiqure the total I owe ya for the hood, paint divider, and antenna, keeping in mind no shipping. Also, let me know if the door guards fall through as well. Im going to be out of town this weekend but if you need me to send you something, give me your mailing address on a PM. You have my phone number too.

ricks71pu · 02-22-2012, 01:58 PM

still have cargo lamp?
better pics?
shipped to 97301 price?
thank you!

TDBFIXIT · 02-22-2012, 02:57 PM

Quote:

Originally Posted by ricks71pu

still have cargo lamp?
better pics?
shipped to 97301 price?
thank you!

cargo and gasket shipped to 97301 - $23.50 I know the harness is in the pic. but it is not included, promised w/ the cab for a previous post

DeputyDan · 02-22-2012, 03:55 PM

Quote:

Originally Posted by TDBFIXIT

Ron, (va72longhorn) Kelly has passed on the paint divider and the antenna. You are now 1st on both.

DeputyDan - Kelly has passed on the used moldings. I will figure shipping to 65101 and let you know.

Sounds good just let me know what it will be with shipping 65101

NoNeck · 02-23-2012, 05:09 PM

David - My computer has been down all week. Sorry, I will pass on the wiper arms.

Thanks, NoNeck

TDBFIXIT · 02-23-2012, 07:01 PM

Gentlemen.....CDP is now firm on the cab, together with all wiring harnesses and also motor A/C brackets w/ balancer pulley for a total of $600. He is scheduled to make the trip on March 10th.

ALSO, NOTE TO EVERYONE, as I understand it, prior to joining this site, 24 hours is ample time to respond to be firm on an item. So if you don't respond to my post or PM within 24 hours of your question or request for shipped price then the item will pass to the next in line. It's gettin' a bit crazy to keep my ducks in a row here...THANKS GENTLEMEN

VA72C10 · 02-23-2012, 11:49 PM

Keep me updated on the rolling chassis. Once it's ready for me to pick up I'll arrange transport and come and pay.

VA72C10 · 02-23-2012, 11:54 PM

Just checking...will the exhaust be included with the frame?

TDBFIXIT · 02-24-2012, 01:22 AM

Quote:

Originally Posted by VA72C10

Just checking...will the exhaust be included with the frame?

Exhaust was dual pipes set-up w/ turbo mufflers that I did myself, but pretty rusted now. Was pretty nice back in the day. Anyway, no stock hangers or anything. PM me your email and I'll shoot a pic. or 2 your way. Otherwise, will keep updated on the frame after the cab goes. THANKS

TDBFIXIT · 02-24-2012, 01:32 PM

For Hillbilly Deluxe....cargo light, gasket, and emblems...shipped to 08867 - $33....Thanks (no response from "ricks71pu")

For supercheyenne1972....moldings are on the way

David

circa73 · 02-26-2012, 09:17 AM

How much for the column and wheel shipped to VA 23666?

TDBFIXIT · 02-26-2012, 02:03 PM

Quote:

Originally Posted by circa73

How much for the column and wheel shipped to VA 23666?

Sorry, the steering went to a CL buyer (I should have said "entire steering" in post #53)

TDBFIXIT · 02-27-2012, 07:26 PM

More stuff:
Battery tray w/ hold down and A/C lines clamps, mntg. bolts $40 (sold to CDP)
Washer bottle, good pick up tube & screen tip, bracket, hex screws $5
Radiator brackets, upper & lower, w/ rubber cusions & bolts $10
Front Bumper brackets, good threads in welded nuts, bolts $20
Orig. AM radio (removed and stored since '95) (tested, stations tune in, sound good) w/ dash speaker, wire harness connectors, support brackets $50 all ( sold to CDP)
hood hinges, bolts $20 pair ( sold to va72loghorn)
hood latch w/ center support, bolts $10
Hood plate/pin, bolts $5 ( sold to va72longhorn)
tailgate trim set, 4 pcs. couple screw holes in R & L pcs, as is $15
Tail bezels, dinged/dimpled, otherwise straight $8 pair
eyebrow moldings, dinged, as is $8 pair
rear view mirror $5
door hinges, jamb strike/catches & back plates, bolts $30 all ( sold to CDP)
fan shroud (350) $20 (pndg. sold to CDP)
park lights $5 pair

TDBFIXIT · 02-27-2012, 07:54 PM

No response from Critterman on DOOR EDGE GUARDS since 2/22. Passing to va72longhorn who is NIL.

**va72longhorn** · 02-27-2012, 08:04 PM

i'll take the hinges as well
Posted via Mobile Device

TDBFIXIT · 02-28-2012, 12:32 AM

From PM from CDP....1st on battery tray, shroud, door hinges set, and radio.

va72longhorn 1st on hood hinges (prev. post)

**va72longhorn** · 02-28-2012, 11:41 AM

David, does the hood that Im getting from you have a hood pin? If not, I'll take the hood pin, plate, and bolts. Put me second in line on the radio, if it falls through.

02-21-2012, 06:29 PM	#51
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Parting 71 gmc lb I'd like to get in line for the rolling chassis with the cab on it. __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-21-2012, 10:02 PM	#54
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Parting 71 gmc lb I will pass on the mirrors any info on the Drip rail molding yet I think I am second inline for those as well also interested in door edge guards.

02-22-2012, 09:27 AM	#56
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Parting 71 gmc lb Hey David, you may want to consider putting a time limit on some of this stuff. If the cab gets passed on, you have an oppourtunuity to sell it, the frame, and possibly the engine as a package to the next in line. A 350 block has more value to the guy who wants the frame and cab (numbers still match and they get the title with the cab) than it does to anyone else. 350 engines (that need rebuilding) are a dime a dozen and youd be surprised how many are sitting under a garage workshop table. In addition, it saves you alot of labor pulling parts that you dont need to. We dont do "auction" style buying on here, but you dont like waiting a week for someone to say "I'll pass on it" before youre next in line. Once you get a definite "I'll take it", the amount of time it takes to get you paid is between you and the buyer. At that point, the second in line knows that its gone and they can look elsewhere. Im sure there are some that disagree with me, but its just my 2 pennies.

02-22-2012, 10:53 AM	#57
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb Ron, I appreciate the quality input. Didn't know about the "numbers matching" point. But, CDP is now firm about the cab (he expressed interest in posts prior to VA72C10) That puts VA72C10 1st on the rolling chassis, by itself, if he wants it. I am working out the details w/ CDP on the cab and will update when the chassis is ready.

02-22-2012, 11:32 AM	#58
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb Ron, (va72longhorn) Kelly has passed on the paint divider and the antenna. You are now 1st on both. DeputyDan - Kelly has passed on the used moldings. I will figure shipping to 65101 and let you know. Last edited by TDBFIXIT; 02-22-2012 at 11:53 AM.

02-21-2012, 08:37 PM	#53
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb PIC. of firewall as requested by "cdp" cab is SOLD and pending to CDP Steering and brake booster are committed to a CL buyer Attached Images Last edited by TDBFIXIT; 02-23-2012 at 07:06 PM.

02-22-2012, 01:36 PM	#59
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Parting 71 gmc lb I'll take them both. Put them with the hood. Fiqure the total I owe ya for the hood, paint divider, and antenna, keeping in mind no shipping. Also, let me know if the door guards fall through as well. Im going to be out of town this weekend but if you need me to send you something, give me your mailing address on a PM. You have my phone number too.

02-22-2012, 01:58 PM	#60
ricks71pu Registered User Join Date: Feb 2010 Location: salem oregon Posts: 225	Re: Parting 71 gmc lb still have cargo lamp? better pics? shipped to 97301 price? thank you! __________________ In the words of my favorite poet, singer/songwriter (Paul Thorn):"What ever you believe, you might be wrong"

02-23-2012, 05:09 PM	#63
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Parting 71 gmc lb David - My computer has been down all week. Sorry, I will pass on the wiper arms. Thanks, NoNeck __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

02-23-2012, 07:01 PM	#64
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb Gentlemen.....CDP is now firm on the cab, together with all wiring harnesses and also motor A/C brackets w/ balancer pulley for a total of $600. He is scheduled to make the trip on March 10th. ALSO, NOTE TO EVERYONE, as I understand it, prior to joining this site, 24 hours is ample time to respond to be firm on an item. So if you don't respond to my post or PM within 24 hours of your question or request for shipped price then the item will pass to the next in line. It's gettin' a bit crazy to keep my ducks in a row here...THANKS GENTLEMEN Last edited by TDBFIXIT; 02-23-2012 at 07:19 PM.

02-23-2012, 11:49 PM	#65
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Parting 71 gmc lb Keep me updated on the rolling chassis. Once it's ready for me to pick up I'll arrange transport and come and pay. __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-23-2012, 11:54 PM	#66
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Parting 71 gmc lb Just checking...will the exhaust be included with the frame? __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-24-2012, 01:32 PM	#68
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb For Hillbilly Deluxe....cargo light, gasket, and emblems...shipped to 08867 - $33....Thanks (no response from "ricks71pu") For supercheyenne1972....moldings are on the way David

02-26-2012, 09:17 AM	#69
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: Parting 71 gmc lb How much for the column and wheel shipped to VA 23666?

02-27-2012, 07:26 PM	#71
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb More stuff: Battery tray w/ hold down and A/C lines clamps, mntg. bolts $40 (sold to CDP) Washer bottle, good pick up tube & screen tip, bracket, hex screws $5 Radiator brackets, upper & lower, w/ rubber cusions & bolts $10 Front Bumper brackets, good threads in welded nuts, bolts $20 Orig. AM radio (removed and stored since '95) (tested, stations tune in, sound good) w/ dash speaker, wire harness connectors, support brackets $50 all ( sold to CDP) hood hinges, bolts $20 pair ( sold to va72loghorn) hood latch w/ center support, bolts $10 Hood plate/pin, bolts $5 ( sold to va72longhorn) tailgate trim set, 4 pcs. couple screw holes in R & L pcs, as is $15 Tail bezels, dinged/dimpled, otherwise straight $8 pair eyebrow moldings, dinged, as is $8 pair rear view mirror $5 door hinges, jamb strike/catches & back plates, bolts $30 all ( sold to CDP) fan shroud (350) $20 (pndg. sold to CDP) park lights $5 pair Attached Images Last edited by TDBFIXIT; 07-27-2012 at 02:17 PM. Reason: update



Register or Log In To remove these advertisements.

02-27-2012, 07:54 PM	#72
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb No response from Critterman on DOOR EDGE GUARDS since 2/22. Passing to va72longhorn who is NIL.

02-27-2012, 08:04 PM	#73
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Parting 71 gmc lb i'll take the hinges as well Posted via Mobile Device

02-28-2012, 12:32 AM	#74
TDBFIXIT Registered User Join Date: Feb 2012 Location: Alexandria, VA Posts: 45	Re: Parting 71 gmc lb From PM from CDP....1st on battery tray, shroud, door hinges set, and radio. va72longhorn 1st on hood hinges (prev. post) Last edited by TDBFIXIT; 02-28-2012 at 10:43 AM.

02-28-2012, 11:41 AM	#75
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 435	Re: Parting 71 gmc lb David, does the hood that Im getting from you have a hood pin? If not, I'll take the hood pin, plate, and bolts. Put me second in line on the radio, if it falls through.

Register or Log In To remove these advertisements.