Is $300 to much? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 03-04-2012, 12:58 PM

You better. What happened to your SWB build project?

doubleb's69 · 03-04-2012, 01:08 PM

Quote:

Originally Posted by Dieselwrencher

You better. What happened to your SWB build project?

I was so excited to get a shorty build going that I didn't take the time to carefuly look things over and the frame ended up being bent and I didn't want to deal with it since I would have had to do a body swap to get it back into shape so I sold it to a member in Illinois. Who knows when I will get another truck to tool around in. I was in Melrose Iowa yesterday and happened upon a sealed bid for a 1976 3/4 ton 4X4 Chevy fire dept. truck that had 9800 original miles. It was rust free but had its fair share of dents and holes drilled in it. It was a 400/400 combo with full time 4X4. I put a bid in for $1650 and found out it went for $2500 ( yesterday happened to be the last day ). Oh well, I still found a great skull rack while shed hunting. There are pics on the hunting thread in the general discussion area.

**Dieselwrencher** · 03-04-2012, 01:27 PM

You better just go get that 4x4 you know about.

doubleb's69 · 03-04-2012, 04:00 PM

Well I paid the man and got the title and keys. Here are some pics. It has an Edelbrock carb, aluminum intake and Accel HEI dizzy. He said he quit driving it because of brake issues and the engine was getting a little tired.

Ryan It was right in your neck of the woods. It was over by the library in Mitchellville. I bet you have seen it before.

doubleb's69 · 03-04-2012, 04:02 PM

More pics.

Meatman · 03-04-2012, 04:44 PM

Nice find. Great truck to part out. You dont feel bad to send her to the crusher cause she is so rusty.

Newtz67 · 03-04-2012, 04:53 PM

I believe you'll easily double your money!

doubleb's69 · 03-04-2012, 07:21 PM

Quote:

Originally Posted by Meatman

Nice find. Great truck to part out. You dont feel bad to send her to the crusher cause she is so rusty.

It will give up all of the parts that can be reused before going so its ok with me. If you look in the first picture look at the difference in the bed height to the cab height on the drivers side. I think its pretty well rotten underneith. There is barely anything holding the passenger trailing arm together.

VA72C10 · 03-04-2012, 07:26 PM

Quote:

Originally Posted by Newtz67

I believe you'll easily double your money!

if not a lot more!

doubleb's69 · 03-04-2012, 07:47 PM

I have never totaly parted out something so this is new to me. I hope to continue to do this in the future on a small scale. Maybe one or two trucks a year. My problem is I have a hard time parting with things so it should be interesting. I have decided though that when it gets to my house and disassembled is when I will start a thread in the parts section.

KrazyRay · 03-04-2012, 09:27 PM

You have over $1000 in parts and metal.

krazy_texan · 03-04-2012, 10:02 PM

I'll come help you tear it apart
i see a couple of parts on there i may want for my 65

doubleb's69 · 03-05-2012, 12:12 AM

Quote:

Originally Posted by krazy_texan

I'll come help you tear it apart
i see a couple of parts on there i may want for my 65

Sounds good to me.

**Dieselwrencher** · 03-05-2012, 11:47 AM

SOB! That guy said he wanted to wait till spring to get rid of that thing so his yard didn't get messed up getting it out. I was thinking when you said $300 that was the truck.

Did you have to take it with all the crap in the back?

doubleb's69 · 03-05-2012, 12:42 PM

Quote:

Originally Posted by Dieselwrencher

SOB! That guy said he wanted to wait till spring to get rid of that thing so his yard didn't get messed up getting it out. I was thinking when you said $300 that was the truck.

Did you have to take it with all the crap in the back?

Yes everything goes. I have a 40 yard dumpster so it should be ok. I must have caught him on the right day.

03-04-2012, 12:58 PM	#26
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Is $300 to much? You better. What happened to your SWB build project? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-04-2012, 01:27 PM	#28
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Is $300 to much? You better just go get that 4x4 you know about. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-04-2012, 04:00 PM	#29
doubleb's69 Registered User Join Date: Aug 2010 Location: Des Moines, IA Posts: 1,241	Re: Is $300 to much? Well I paid the man and got the title and keys. Here are some pics. It has an Edelbrock carb, aluminum intake and Accel HEI dizzy. He said he quit driving it because of brake issues and the engine was getting a little tired. Ryan It was right in your neck of the woods. It was over by the library in Mitchellville. I bet you have seen it before. Attached Images __________________ Bud

03-04-2012, 04:02 PM	#30
doubleb's69 Registered User Join Date: Aug 2010 Location: Des Moines, IA Posts: 1,241	Re: Is $300 to much? More pics. Attached Images __________________ Bud

03-04-2012, 04:44 PM	#31
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Is $300 to much? Nice find. Great truck to part out. You dont feel bad to send her to the crusher cause she is so rusty. __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

03-04-2012, 04:53 PM	#32
Newtz67 Registered User Join Date: Mar 2010 Location: A t w a t e r, Ca Posts: 1,201	Re: Is $300 to much? I believe you'll easily double your money! __________________ My '67 short wide Our '68 Burb My '04 Z71 The '54 Belair The '69 Cadillac

03-04-2012, 07:47 PM	#35
doubleb's69 Registered User Join Date: Aug 2010 Location: Des Moines, IA Posts: 1,241	Re: Is $300 to much? I have never totaly parted out something so this is new to me. I hope to continue to do this in the future on a small scale. Maybe one or two trucks a year. My problem is I have a hard time parting with things so it should be interesting. I have decided though that when it gets to my house and disassembled is when I will start a thread in the parts section. __________________ Bud

03-04-2012, 09:27 PM	#36
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Is $300 to much? You have over $1000 in parts and metal.

03-04-2012, 10:02 PM	#37
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	Re: Is $300 to much? I'll come help you tear it apart i see a couple of parts on there i may want for my 65 __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO Last edited by krazy_texan; 03-04-2012 at 10:13 PM.

03-05-2012, 11:47 AM	#39
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Is $300 to much? SOB! That guy said he wanted to wait till spring to get rid of that thing so his yard didn't get messed up getting it out. I was thinking when you said $300 that was the truck. Did you have to take it with all the crap in the back? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.