KS Doors, Fenders, - The 1947 - Present Chevrolet & GMC Truck Message Board Network

afcamaro · 03-01-2012, 01:36 PM

I have a few misc truck parts that I have aquired while working on my truck. I will get more pictures up if needed.

68-71 Pair of Complete doors. Pretty solid. Id say they both needs a skin but the bottom channels are pretty good. Come with everything. Windows, door panels, all mechanisms. armrests, etc. No mirrors though. $200 for the pair.

Gmc fron fenders, there in okay shape. Id honestly just use them for parts due to the creases they have on their lower parts. The front cups are still good. compelete with 4x4 emblems, gmc emblems, and misc trim etc. $60 for the set

Hood Hinges, few sets of these, $25

Lower hood latch, $20

72 White door panels. Great shape, just need repainted. $35

White Visors, good shape and will clean up excellent. I think there might be a small tear in one. $25

Cab gas tank, really nice and clean. Complete with sending unit, cover, misc fuel lines, grommets, bolts to bolt it in, etc. $120

Shortbed Drivers side bedside. NO RUST ORIGINAL. But did get hit nears the front cab at one time. Told its fixable or use for parts. Wheel well area is in great shape and tail light area as well. $100

Tailgate, just the shell, No writings on it. Some surface rust and a crease at the bottom. $20.

Complete set of door hinges, $50. Feel tight.

Extra ashtray great shape -$10

I also have a 1972 Camaro engine block, disassembled short block that needs a crank since its scarred up. $100

I do have paypal it is sweet1967camaro@yahoo.com

All prices are obo. Im negiotable on everything, want this stuff gone. Ill have more to post in a few weeks as I clean out my garage and finish my truck.

Ive shipped alot of smaller stuff before and have no problems doing that. Idk about shipping the larger items though.

VA72C10 · 03-01-2012, 01:43 PM

shipped price on the door panels? I'll take them pending shipping cost if no cracks

VA72C10 · 03-01-2012, 01:43 PM

will you ship the gate? If so, shipped price on that also? Have a custom project I'd like to do with it....

afcamaro · 03-01-2012, 01:44 PM

If your talking about the 72 door panels theyre are not rips in them, mounting holes are great. Id do $60 shipped on them.

The gate I dont think Ill ship that. Thanks though

BMERDOC · 03-01-2012, 01:52 PM

Next in line for the tailgate if Jonathan doesnt want it.

VA72C10 · 03-01-2012, 02:23 PM

I was meaning the white ones that are off the door

afcamaro · 03-01-2012, 02:25 PM

Yea brain fart there. Id do $60 shipped on them. theres no tears on them either

VA72C10 · 03-01-2012, 02:30 PM

I'll take the door panels. How much for the tailgate shipped?

afcamaro · 03-01-2012, 02:37 PM

I dont think Ill ship the tailgate. Heard too many stories about larger items like that not getting there in the condition they should have.

woodymm3 · 03-01-2012, 05:21 PM

I am interested in the doors pending more pictures. I would like to see the bottoms and any problem areas please. I live in OKC so may have to make a trip up there!

afcamaro · 03-01-2012, 05:36 PM

Ill get more pictures tonight

Meatman · 03-01-2012, 05:59 PM

Interested in gate. Pm your number
Posted via Mobile Device

**DaHos** · 03-01-2012, 07:11 PM

Could you get some detail pics of the fenders, cups and and rear tails. Also could you cut them for shipping?
thx

afcamaro · 03-01-2012, 09:21 PM

here are some of the doors. the outter skins the worst. surface rust really just at the bottom.

afcamaro · 03-01-2012, 09:25 PM

I will cut up these fenders if needed. cups are good. the front by the headlights are good. the bad spots are behind the tire, where they are creased.

68lowburb · 03-01-2012, 11:15 PM

shipping quote on fenders to 70819 thanks jimmy

afcamaro · 03-02-2012, 03:17 PM

DaHos, you still wanting the fenders cut up?
VA72C10 you still want the door panels?

Im willing to work on price on anything. If your near Topeka and interested in some stuff I'll make a really good deal on whats left.

VA72C10 · 03-02-2012, 03:47 PM

Yes, I still want the door panels. If someone passes on the fenders I'd also be interested in the cups (one or all)

**DaHos** · 03-02-2012, 08:13 PM

I will pass on the fender cuts, just found some today.

Gotta love rain days at the pic and pull !!!!

afcamaro · 03-05-2012, 06:01 PM

Tailgate is sold. OBO on all this. Dont be afraid to make an offer. I want this stuff gone!!!

03-01-2012, 01:36 PM	#1
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Doors, Fenders, I have a few misc truck parts that I have aquired while working on my truck. I will get more pictures up if needed. 68-71 Pair of Complete doors. Pretty solid. Id say they both needs a skin but the bottom channels are pretty good. Come with everything. Windows, door panels, all mechanisms. armrests, etc. No mirrors though. $200 for the pair. Gmc fron fenders, there in okay shape. Id honestly just use them for parts due to the creases they have on their lower parts. The front cups are still good. compelete with 4x4 emblems, gmc emblems, and misc trim etc. $60 for the set Hood Hinges, few sets of these, $25 Lower hood latch, $20 72 White door panels. Great shape, just need repainted. $35 White Visors, good shape and will clean up excellent. I think there might be a small tear in one. $25 Cab gas tank, really nice and clean. Complete with sending unit, cover, misc fuel lines, grommets, bolts to bolt it in, etc. $120 Shortbed Drivers side bedside. NO RUST ORIGINAL. But did get hit nears the front cab at one time. Told its fixable or use for parts. Wheel well area is in great shape and tail light area as well. $100 Tailgate, just the shell, No writings on it. Some surface rust and a crease at the bottom. $20. Complete set of door hinges, $50. Feel tight. Extra ashtray great shape -$10 I also have a 1972 Camaro engine block, disassembled short block that needs a crank since its scarred up. $100 I do have paypal it is sweet1967camaro@yahoo.com All prices are obo. Im negiotable on everything, want this stuff gone. Ill have more to post in a few weeks as I clean out my garage and finish my truck. Ive shipped alot of smaller stuff before and have no problems doing that. Idk about shipping the larger items though. Attached Images Last edited by afcamaro; 03-01-2012 at 05:33 PM. Reason: inserting paypal address

03-01-2012, 01:43 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Doors, Fenders, shipped price on the door panels? I'll take them pending shipping cost if no cracks __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-01-2012, 01:43 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Doors, Fenders, will you ship the gate? If so, shipped price on that also? Have a custom project I'd like to do with it.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-01-2012, 01:44 PM	#4
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, If your talking about the 72 door panels theyre are not rips in them, mounting holes are great. Id do $60 shipped on them. The gate I dont think Ill ship that. Thanks though Last edited by afcamaro; 03-01-2012 at 01:55 PM.

03-01-2012, 01:52 PM	#5
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: Doors, Fenders, Next in line for the tailgate if Jonathan doesnt want it. __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

03-01-2012, 02:23 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Doors, Fenders, I was meaning the white ones that are off the door __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-01-2012, 02:25 PM	#7
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, Yea brain fart there. Id do $60 shipped on them. theres no tears on them either

03-01-2012, 02:30 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Doors, Fenders, I'll take the door panels. How much for the tailgate shipped? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-01-2012, 02:37 PM	#9
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, I dont think Ill ship the tailgate. Heard too many stories about larger items like that not getting there in the condition they should have.

03-01-2012, 05:21 PM	#10
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: Doors, Fenders, I am interested in the doors pending more pictures. I would like to see the bottoms and any problem areas please. I live in OKC so may have to make a trip up there!

03-01-2012, 05:36 PM	#11
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, Ill get more pictures tonight

03-01-2012, 05:59 PM	#12
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Doors, Fenders, Interested in gate. Pm your number Posted via Mobile Device __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

03-01-2012, 07:11 PM	#13
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: Doors, Fenders, Could you get some detail pics of the fenders, cups and and rear tails. Also could you cut them for shipping? thx __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-01-2012, 09:21 PM	#14
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, here are some of the doors. the outter skins the worst. surface rust really just at the bottom. Attached Images

03-01-2012, 09:25 PM	#15
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, I will cut up these fenders if needed. cups are good. the front by the headlights are good. the bad spots are behind the tire, where they are creased. Attached Images



Register or Log In To remove these advertisements.

03-01-2012, 11:15 PM	#16
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Doors, Fenders, shipping quote on fenders to 70819 thanks jimmy

03-02-2012, 03:17 PM	#17
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, DaHos, you still wanting the fenders cut up? VA72C10 you still want the door panels? Im willing to work on price on anything. If your near Topeka and interested in some stuff I'll make a really good deal on whats left.

03-02-2012, 03:47 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Doors, Fenders, Yes, I still want the door panels. If someone passes on the fenders I'd also be interested in the cups (one or all) __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-02-2012, 08:13 PM	#19
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: Doors, Fenders, I will pass on the fender cuts, just found some today. Gotta love rain days at the pic and pull !!!! __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-05-2012, 06:01 PM	#20
afcamaro Registered User Join Date: Nov 2011 Location: topeka, ks Posts: 616	Re: Doors, Fenders, Tailgate is sold. OBO on all this. Dont be afraid to make an offer. I want this stuff gone!!!

Register or Log In To remove these advertisements.