Is a 68 GMC cab the same as 68 C10 and will it change the vin? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bigwolfe87 · 03-05-2012, 01:21 AM

I have a 68 chevy c10 but I found a sweet deal on a 68 gmc cab thats rust free. Will it bolt up and is there any difference? Can I still use my 68 chevy clip? and the new is set up for automatic, what do I have to do to put the clutch pedal in?

jhyder408 · 03-06-2012, 01:18 AM

body is the same

**special-K** · 03-07-2012, 08:00 AM

Just remove the clutch delete plate in the firewall. You have everything you need from your Chev,right? The pedals are the same,if the GMC cab still has the brake pedal. The clutch pedal just slides through what's already there. You remove a clip or pin of something on the inner side and slide the pedal with rod attached. Look up in there and see how it's held in place. It's been a while and I don't recall exactly how it's kept but I do recall it's easy.

**RenoKeene** · 03-07-2012, 09:16 AM

The clutch is no problem but the VIN might be. Do you have a title with the GMC cab? If not are you planning on swapping VIN plates? Do you have the correct rossete rivits to make that happen? You might want to check on the legalities of all that before you dive in too deep.

03-05-2012, 01:21 AM	#1
Bigwolfe87 Registered User Join Date: May 2011 Location: Orlando, FL Posts: 10	Is a 68 GMC cab the same as 68 C10 and will it change the vin? I have a 68 chevy c10 but I found a sweet deal on a 68 gmc cab thats rust free. Will it bolt up and is there any difference? Can I still use my 68 chevy clip? and the new is set up for automatic, what do I have to do to put the clutch pedal in? __________________ Under Construction....but determined to finish

03-06-2012, 01:18 AM	#2
jhyder408 Registered User Join Date: Oct 2007 Location: Albany, OR Posts: 93	Re: Is a 68 GMC cab the same as 68 C10 and will it change the vin? body is the same

03-07-2012, 08:00 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Is a 68 GMC cab the same as 68 C10 and will it change the vin? Just remove the clutch delete plate in the firewall. You have everything you need from your Chev,right? The pedals are the same,if the GMC cab still has the brake pedal. The clutch pedal just slides through what's already there. You remove a clip or pin of something on the inner side and slide the pedal with rod attached. Look up in there and see how it's held in place. It's been a while and I don't recall exactly how it's kept but I do recall it's easy. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-07-2012, 09:16 AM	#4
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,022	Re: Is a 68 GMC cab the same as 68 C10 and will it change the vin? The clutch is no problem but the VIN might be. Do you have a title with the GMC cab? If not are you planning on swapping VIN plates? Do you have the correct rossete rivits to make that happen? You might want to check on the legalities of all that before you dive in too deep. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.