Seat Belt Bolt Threads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aventur1 · 03-07-2012, 08:45 PM

Are the threads the same for the under the seat belt bolts and the upper corner cab bolts. Going to install over the shoulder belts and need to get bolts and just want to make sure.

**LockDoc** · 03-07-2012, 11:15 PM

-
I can't tell you the sizes but the ones on the floor are a larger bolt. I would be sure and get grade 8 bolts though.

LockDoc

aventur1 · 03-07-2012, 11:40 PM

Thanks Lock Doc maybe the plastic from the plug is still part in there.

03-07-2012, 08:45 PM	#1
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Seat Belt Bolt Threads Are the threads the same for the under the seat belt bolts and the upper corner cab bolts. Going to install over the shoulder belts and need to get bolts and just want to make sure. __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

03-07-2012, 11:15 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,432	Re: Seat Belt Bolt Threads - I can't tell you the sizes but the ones on the floor are a larger bolt. I would be sure and get grade 8 bolts though. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-07-2012, 11:40 PM	#3
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Seat Belt Bolt Threads Thanks Lock Doc maybe the plastic from the plug is still part in there. __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.