AZ WTB Air pressure Gauge

[mosesburb]

I need an air pressure gauge. I only *need* the gauge, but will consider a front tin and a rear monting plate (what the gauge mounts to).

I bought a whole air pressure cluster for the 80lb oil pressure gauge a few years ago. I pulled the oil pressure gauge out and proceeded to lose everything else except the lens.

Any condition will be considered, but the gauge must be functional.

[PT'S 70 CST]

I have a few, let me walk out to the shop and look. I think one of them is not any good. And be careful when buying these because the air lines built up condensation just like an air compressor and the inside of some of these gauges get rusted and stopped up.


PT

[mosesburb]

Cool!! Let me know what you find.

[PT'S 70 CST]

I found one and I will check it in the morning to make sure it works.


PT

[PT'S 70 CST]

Here are some pics of the gauge.The face is very clean. The backing plate has been media blasted and painted. The needle has been painted and the gauge was tested and indeed works fine. I will take $55.00 shipped with the backing plate or $45.00 for just the gauge. I also have the inner tin for a tach/air pressure and have the regular non tach/air inner tin.


PT

[puppyluppy]

If this does not sell i will take it. Like wise if you have another. Thom, thom@bapsecurity.com 478 746-6000