CA Parting 70 Big Block Longhorn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 03-09-2012, 09:11 PM

EDIT THIS TRUCK IS GONE I WILL LIST LEFTOVER PARTS SEPARATELY I just brought this in and did a test drive to see what was working and what wasn't working. The 396 engine seems to run strong, but has lifter noise. The brakes do not work at all. The th400 is tired. The power steering works great. The carb works, but has ancient gas going through it so it probably needs rebuilt. The ac does not blow cold.
402 bare engine...$350 local
th400...$50 local
ac brackets...
alternator brackets.
crank/water pump pulleys..
power steering setup (no box)..
heat riser with tube...$110 shipped SOLD
air cleaner...
air cleaner spacer...$15 plus shipping SOLD
carb...$60 plus shipping SOLD
AT linkage..
fan shroud a couple of small chips on one side...
grille couple of dings...$60 local
front bumper with dents...$10 local SOLD
front bumper brackets...$20 plus shipping
very nice auxiliary battery tray...$100 plus shipping SOLD
ac battery tray no rot...$25 plus shipping
th400 kickdown...$37 shipped SOLD
AT steering column...$50 plus shipping SOLD
radio
high hump..
Please respond in thread to avoid confusion. Post office money order preferred, paypal accepted.
Thanks, Ray

KrazyRay · 03-09-2012, 09:21 PM

pics

KrazyRay · 03-09-2012, 09:30 PM

more

**w314speed** · 03-09-2012, 09:45 PM

I'll take the carb spacer with spark arrestor shipped to 30127.

Price w/shipping of auxiliary battery harness and relay shipped to 30127?

KrazyRay · 03-09-2012, 09:46 PM

Sharpie...bracket is included. See pic
Thanks, Ray

no moa · 03-09-2012, 09:47 PM

Glovebox door price shipped to maine?
Thank you.
Posted via Mobile Device

*sharpie1972* · 03-09-2012, 09:47 PM

Thanks Ray, not the one I was after. I will delete my earlier post. Thanks, Sharpie

71 super · 03-09-2012, 09:58 PM

I will take carb, kick down, heat riser and tube. Let me know where to send payment. Thanks Harold

**w314speed** · 03-09-2012, 09:58 PM

I'll take the a/c brackets for $240 shipped! Thanks, Dan

**w314speed** · 03-09-2012, 10:05 PM

Price for the firewall insulation and camper mirrors? shipped to 30127?

KrazyRay · 03-09-2012, 10:10 PM

w314speed...The carb spacer (see pic), the aux. relay, and the aux harness which goes from the fuse box, through the aux. area, and on to the main battery. $45 shipped for everything.

**too much stuff** · 03-09-2012, 10:15 PM

Fender emblems and hubcaps?

REEDS 72 · 03-09-2012, 10:20 PM

Hi how about the fuel line from the pump to the carb all take it if the fitings are not all stripped out thanks.

4xshort · 03-09-2012, 10:22 PM

interested in the camper wiring harness, aux battery tray with wiring, under dash wire harness, fuel sender wire harness and hard fuel line from sender to floor. Thanks Josh

**w314speed** · 03-09-2012, 10:25 PM

The carb spacer is not a BB, so I'm out on it. I'll take the auxilliary battery harness and relay for $30 shipped?? Are the camper mirrors in good shape? Thanks, Dan

KrazyRay · 03-09-2012, 10:30 PM

no moa...$26 shipped for the door
Sharpie...no problem
71 super...$207 shipped for the carb, the kickdown, and the heat riser with tube.
w314speed...the ac brackets are yours. The insulation and mirrors are $40 plus shipping

Thanks, Ray

**tll74** · 03-09-2012, 10:35 PM

I'll take the carb spacer w/spark arrestor, carb to firewall rod and in line for carb.

**tll74** · 03-09-2012, 10:37 PM

Also in line for the 396 emblems. How about any lower trim with only very minor defects especially the 3 tool box pieces. Water pump if orginal GM casting...date code? Engine dipstick and tube? Sparkplug heat sheilds? Thanks, Tom

**w314speed** · 03-09-2012, 10:43 PM

I have the A/C brackets @ $240 shipped, the auxilliary battery harness with relay for $30 shipped and the firewall insulation pad and camper mirrors for $40 shipped...Looks like $310 shipped Thanks, Dan

KrazyRay · 03-09-2012, 10:46 PM

Eric...There are 3 hubcaps in bad shape $15 plus shipping, C20 emblems are $10pr. and 8-400 emblems are $18pr.
REEDS 72...fuel line has been cut.
4xshort...$15 for camper harness if good, $100 for aux. tray, 2nd in line for aux. harness, $5 fuel sender wire, and $5 for fuel line from tank to under floor. all plus shipping
w314speed...$30 shipped is good. The camper mirrors look good.

Thanks, Ray

**too much stuff** · 03-09-2012, 10:58 PM

Can i get a pic of the hubcaps when you have a chance? I will pass on the emblems. I thought they might be c-30, 8-396. Thanks.

no moa · 03-09-2012, 11:11 PM

I'll take the door ray. Pm sent.
Posted via Mobile Device

KrazyRay · 03-09-2012, 11:12 PM

tll74...$35 shipped for spacer and rod. Sorry, 396 emblems are 69 only, no tool box on this one.
w314speed...I will get your parts pulled and take pics to verify all is good.

Thanks, Ray

KrazyRay · 03-09-2012, 11:27 PM

Eric...2 are saveable and 1 is junk...$25 total shipped for 3 or $23 shipped for 2

**too much stuff** · 03-10-2012, 12:30 AM

Ray, i would hate to see them get scrapped so i will take them. Paypal?

03-09-2012, 09:11 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 70 Big Block Longhorn EDIT THIS TRUCK IS GONE I WILL LIST LEFTOVER PARTS SEPARATELY I just brought this in and did a test drive to see what was working and what wasn't working. The 396 engine seems to run strong, but has lifter noise. The brakes do not work at all. The th400 is tired. The power steering works great. The carb works, but has ancient gas going through it so it probably needs rebuilt. The ac does not blow cold. 402 bare engine...$350 local th400...$50 local ac brackets... alternator brackets. crank/water pump pulleys.. power steering setup (no box).. heat riser with tube...$110 shipped SOLD air cleaner... air cleaner spacer...$15 plus shipping SOLD carb...$60 plus shipping SOLD AT linkage.. fan shroud a couple of small chips on one side... grille couple of dings...$60 local front bumper with dents...$10 local SOLD front bumper brackets...$20 plus shipping very nice auxiliary battery tray...$100 plus shipping SOLD ac battery tray no rot...$25 plus shipping th400 kickdown...$37 shipped SOLD AT steering column...$50 plus shipping SOLD radio high hump.. Please respond in thread to avoid confusion. Post office money order preferred, paypal accepted. Thanks, Ray Attached Images Last edited by KrazyRay; 04-03-2012 at 11:39 AM.

03-09-2012, 09:21 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn pics Attached Images

03-09-2012, 09:30 PM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn more Attached Images

03-09-2012, 09:45 PM	#4
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Parting 70 Big Block Longhorn I'll take the carb spacer with spark arrestor shipped to 30127. Price w/shipping of auxiliary battery harness and relay shipped to 30127?

03-09-2012, 09:46 PM	#5
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Sharpie...bracket is included. See pic Thanks, Ray Attached Images

03-09-2012, 09:47 PM	#6
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Parting 70 Big Block Longhorn Glovebox door price shipped to maine? Thank you. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-09-2012, 09:47 PM	#7
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 70 Big Block Longhorn Thanks Ray, not the one I was after. I will delete my earlier post. Thanks, Sharpie

03-09-2012, 09:58 PM	#8
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Parting 70 Big Block Longhorn I will take carb, kick down, heat riser and tube. Let me know where to send payment. Thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

03-09-2012, 10:05 PM	#10
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Parting 70 Big Block Longhorn Price for the firewall insulation and camper mirrors? shipped to 30127?

03-09-2012, 10:10 PM	#11
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn w314speed...The carb spacer (see pic), the aux. relay, and the aux harness which goes from the fuse box, through the aux. area, and on to the main battery. $45 shipped for everything. Attached Images

03-09-2012, 10:15 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Parting 70 Big Block Longhorn Fender emblems and hubcaps? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-09-2012, 10:20 PM	#13
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parting 70 Big Block Longhorn Hi how about the fuel line from the pump to the carb all take it if the fitings are not all stripped out thanks.

03-09-2012, 10:22 PM	#14
4xshort Registered User Join Date: Jan 2012 Location: Waseca Saskatchewan, Canada Posts: 276	Re: Parting 70 Big Block Longhorn interested in the camper wiring harness, aux battery tray with wiring, under dash wire harness, fuel sender wire harness and hard fuel line from sender to floor. Thanks Josh __________________ 1971 Chevy shortbox 4x4 made in Canada

03-09-2012, 10:25 PM	#15
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Parting 70 Big Block Longhorn The carb spacer is not a BB, so I'm out on it. I'll take the auxilliary battery harness and relay for $30 shipped?? Are the camper mirrors in good shape? Thanks, Dan

03-09-2012, 10:30 PM	#16
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn no moa...$26 shipped for the door Sharpie...no problem 71 super...$207 shipped for the carb, the kickdown, and the heat riser with tube. w314speed...the ac brackets are yours. The insulation and mirrors are $40 plus shipping Thanks, Ray



Register or Log In To remove these advertisements.

03-09-2012, 10:35 PM	#17
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 70 Big Block Longhorn I'll take the carb spacer w/spark arrestor, carb to firewall rod and in line for carb. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-09-2012, 10:37 PM	#18
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 70 Big Block Longhorn Also in line for the 396 emblems. How about any lower trim with only very minor defects especially the 3 tool box pieces. Water pump if orginal GM casting...date code? Engine dipstick and tube? Sparkplug heat sheilds? Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 03-09-2012 at 10:46 PM.

03-09-2012, 10:43 PM	#19
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Parting 70 Big Block Longhorn I have the A/C brackets @ $240 shipped, the auxilliary battery harness with relay for $30 shipped and the firewall insulation pad and camper mirrors for $40 shipped...Looks like $310 shipped Thanks, Dan

03-09-2012, 10:46 PM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Eric...There are 3 hubcaps in bad shape $15 plus shipping, C20 emblems are $10pr. and 8-400 emblems are $18pr. REEDS 72...fuel line has been cut. 4xshort...$15 for camper harness if good, $100 for aux. tray, 2nd in line for aux. harness, $5 fuel sender wire, and $5 for fuel line from tank to under floor. all plus shipping w314speed...$30 shipped is good. The camper mirrors look good. Thanks, Ray

03-09-2012, 10:58 PM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Parting 70 Big Block Longhorn Can i get a pic of the hubcaps when you have a chance? I will pass on the emblems. I thought they might be c-30, 8-396. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-09-2012, 11:11 PM	#22
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: Parting 70 Big Block Longhorn I'll take the door ray. Pm sent. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-09-2012, 11:12 PM	#23
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn tll74...$35 shipped for spacer and rod. Sorry, 396 emblems are 69 only, no tool box on this one. w314speed...I will get your parts pulled and take pics to verify all is good. Thanks, Ray

03-09-2012, 11:27 PM	#24
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 70 Big Block Longhorn Eric...2 are saveable and 1 is junk...$25 total shipped for 3 or $23 shipped for 2 Attached Images

03-10-2012, 12:30 AM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Parting 70 Big Block Longhorn Ray, i would hate to see them get scrapped so i will take them. Paypal? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.