bagged members.. i need help!

[slammed]

i will soon be in the procees of bagging my 67 C-10 and i am wondering about what to do w/ the front

of course dropped spindles but what brackets do i need???

or could i just drill the control arm and bolt the bag right up

also will i have room for a 2600 in the front?

[Slammed67]

On these trucks you typically put a flat plate across the upper spring pocket (for the upper bag mount), then make a "cup" that sits in the lower spring pocket (for the lower bag mount). Yes the Firestone "2600" will work up front. Also, you'll need to remove the steering stop/rubber bumper from the lower a-arms. Look around on the Suspension board....... there is a lot of info there.