Pinion angle ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rs72z · 03-13-2012, 10:10 AM

Ok guys i need some info on pinion angle.

I done the rear flip on my 1 ton the poorboy way. I bought a pair of saddles and redrilled them to keep the driveshaft in the same location.
The question is, i have never messed with pinion angle on a 2 piece shaft before. When i set it with the pinion down 2 degrees it sure looks like down alot.
Where should i measure the angles at?
Front of the rear shaft at the splines and on the pinion?
Thanks

blazer2007 · 03-13-2012, 10:49 AM

I asked same ? on engine drivetrain sec. and got lots of replys,just do a search on pinion angle,lots there

rs72z · 03-13-2012, 10:53 AM

Quote:

Originally Posted by blazer2007

I asked same ? on engine drivetrain sec. and got lots of replys,just do a search on pinion angle,lots there

I did a search and didn't find anything, will try again.

KQQL IT · 03-13-2012, 11:47 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=479179
Posted via Mobile Device

rs72z · 03-13-2012, 12:12 PM

Thanks. The spicer info helped.

KQQL IT · 03-13-2012, 12:19 PM

Glad it helped.
When i search i click on 67-72 side otherwise it searchs the web vs. Just here.
Posted via Mobile Device

03-13-2012, 10:10 AM	#1
rs72z Registered User Join Date: Oct 2011 Location: Emory TX Posts: 900	Pinion angle ?? Ok guys i need some info on pinion angle. I done the rear flip on my 1 ton the poorboy way. I bought a pair of saddles and redrilled them to keep the driveshaft in the same location. The question is, i have never messed with pinion angle on a 2 piece shaft before. When i set it with the pinion down 2 degrees it sure looks like down alot. Where should i measure the angles at? Front of the rear shaft at the splines and on the pinion? Thanks __________________ ___________________ 78 ccsb dually 5.3 4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=491551

03-13-2012, 10:49 AM	#2
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: Pinion angle ?? I asked same ? on engine drivetrain sec. and got lots of replys,just do a search on pinion angle,lots there

03-13-2012, 11:47 AM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: Pinion angle ?? http://67-72chevytrucks.com/vboard/s...d.php?t=479179 Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

03-13-2012, 12:12 PM	#5
rs72z Registered User Join Date: Oct 2011 Location: Emory TX Posts: 900	Re: Pinion angle ?? Thanks. The spicer info helped. __________________ ___________________ 78 ccsb dually 5.3 4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=491551

03-13-2012, 12:19 PM	#6
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: Pinion angle ?? Glad it helped. When i search i click on 67-72 side otherwise it searchs the web vs. Just here. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.