67 6 cylinder Power Steering brackets, HELP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmgriffin63 · 03-14-2012, 01:45 PM

My dad has reworked a few trucks, in his retirement, and he has a need for the 6 cylinder Power steering brackets. The motor was originally a 230? but he changed it to a 250, from a 72 chevy. Does anyone know of or have these for sale? I've looked at ebay, but found nothing.

Thanks

geezer#99 · 03-14-2012, 05:03 PM

A sample from ebay. One of many. Search for chevy 250 bracket.
http://www.ebay.com/itm/PS-P-S-TYPE-...e655df&vxp=mtr

PanelDeland · 03-14-2012, 08:32 PM

Make sure to get a set with "ALL" puleys,brackets and the pump,even if you plan on replacing it.There are a couple of different workable setups and they differ in the pulley offset.I have bits and pieces from about4 sets and none of it matches up to fit.You can pull the brackets and pulleys from virtually any 250 powered vehice but will need a truck steering box.The later box feels more comfortable to me at 3.5 turns lock to lock than the factory ratio of 4.5 but that's a personal preference.

03-14-2012, 01:45 PM	#1
bmgriffin63 Registered User Join Date: Mar 2012 Location: Ft. Oglethorpe, Ga Posts: 1	67 6 cylinder Power Steering brackets, HELP! My dad has reworked a few trucks, in his retirement, and he has a need for the 6 cylinder Power steering brackets. The motor was originally a 230? but he changed it to a 250, from a 72 chevy. Does anyone know of or have these for sale? I've looked at ebay, but found nothing. Thanks

03-14-2012, 05:03 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,541	Re: 67 6 cylinder Power Steering brackets, HELP! A sample from ebay. One of many. Search for chevy 250 bracket. http://www.ebay.com/itm/PS-P-S-TYPE-...e655df&vxp=mtr

03-14-2012, 08:32 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 67 6 cylinder Power Steering brackets, HELP! Make sure to get a set with "ALL" puleys,brackets and the pump,even if you plan on replacing it.There are a couple of different workable setups and they differ in the pulley offset.I have bits and pieces from about4 sets and none of it matches up to fit.You can pull the brackets and pulleys from virtually any 250 powered vehice but will need a truck steering box.The later box feels more comfortable to me at 3.5 turns lock to lock than the factory ratio of 4.5 but that's a personal preference. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.