![]() |
![]() |
#26 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Having a bad day
maybe the same i got
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
![]() |
![]() |
![]() |
#27 |
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: Having a bad day
yup that's the one i got not the same adapter but same unit.
so i put a new cap and rotor on (def needed it will post pics after) re set everything and STILL no spark. coil is new and the only thing left if the modual so im ordering it today so its in tomorrow any thoughts?
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
![]() |
![]() |
![]() |
#28 |
Moderator
![]() Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,950
|
Re: Having a bad day
You have 12volts at the BAT terminal?
Here's a pretty good test writeup. http://www.angelfire.com/empire/auto..._IGNITION.html When you replace the module be absolutely sure to cover the mounting pad with heat-sink grease. |
![]() |
![]() |
![]() |
#29 |
Registered User
Join Date: May 2009
Location: Pinehurst, Idaho
Posts: 311
|
Re: Having a bad day
You should check the fuse on the BAT feed wire. Thats probly the best place to start before replacing stuff.
|
![]() |
![]() |
![]() |
#30 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: Having a bad day
Is this distributor computer controlled?
What did the dummy light sender look like? Single wire? Posted via Mobile Device
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#31 |
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: Having a bad day
yeah the dummy light sender was just a single wire unit. and no its not computer controlled (at least i don't think so and i have had the cab completely gutted and never seen anything.)
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
![]() |
![]() |
![]() |
#32 |
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: Having a bad day
new module is in and shes purring like a kitten! now after all this fun stuff..... my oil press guage is still pegged wide open
![]()
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
![]() |
![]() |
![]() |
#33 |
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: Having a bad day
and my temp guage goes from 0 to 240 after the truck warms up and i know for a fact its not that hot.....
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
![]() |
![]() |
![]() |
Bookmarks |
|
|