OR WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Bowties** · 03-03-2012, 12:46 PM

Looking for the below pictured s/w gear and the adjustment drive sleeve that ataches to the end of it. Need two sets, would also purchase any non-operating parts S/W heads if these two pictured parts are good. Thanks in advance for any help or leads on these guys! Mel

**Classic Bowties** · 03-04-2012, 12:14 PM

Back up...

**Classic Bowties** · 03-05-2012, 01:13 PM

Back to Zee Top...

**70shortfleet** · 03-06-2012, 02:46 PM

Mel, do what I did and make your own

PT'S 70 CST · 03-06-2012, 03:01 PM

These get broken from people that do not know that the factory sets these at around 20-22 mph and most that do not know this get these speed warnings and try to turn them down to zero and pop they get broken.

PT

jaros44sr · 03-06-2012, 03:20 PM

Quote:

Originally Posted by 70shortfleet

Mel, do what I did and make your own

Nice, how do you cut the gears?

PT'S 70 CST · 03-06-2012, 03:27 PM

Les this is a very awesome idea but remember that the lip on the main shaft gear keeps all of the other gears from falling out and if this is not setup and installed correctly with the right amount of play then you could loose the rest of your gear cluster. I am sure You know this Les but I am relaying this to the others that are watching or replying to this thread. Also I have been asked in the past about trying to run the repoped Camaro cable that are for sale on various sites. Do not try this approach, you may get it to work for awhile but the truck cable is a 9" cable and the Camaro cable and Vettes, Impala's are 11.5"-13" long and being that they are longer tend to put this gear in a bind and I have seen several people break this shaft trying to use these other adjustment cables.

PT

**Classic Bowties** · 03-07-2012, 06:11 PM

Quote:

Originally Posted by 70shortfleet

Mel, do what I did and make your own

Well since you already have it figured out, hows about sending me two sets sound? Mel

Quote:

Originally Posted by PT'S 70 CST

Les this is a very awesome idea but remember that the lip on the main shaft gear keeps all of the other gears from falling out and if this is not setup and installed correctly with the right amount of play then you could loose the rest of your gear cluster. PT

The picture that Les posted above has it looking right to me, his adjustment shaft gear has the retaining lip on back edge of gear?

PT'S 70 CST · 03-07-2012, 06:31 PM

Mel I am sure if Les made it then it is quality. I was just trying to let those that were viewing the tread know that if you do not know what you are doing then you can screw up a good speed warning.

PT

**70shortfleet** · 03-07-2012, 10:49 PM

Mel, I made those a couple of years ago. I will see what I can do to help you out. Those pieces are high dollar items!

PT'S 70 CST · 03-07-2012, 11:09 PM

Les I will make it worth your while for a couple myself.

PT

70LonghornCST · 03-07-2012, 11:18 PM

Les, I think you just found a good source of supplemental income.

jaros44sr · 03-08-2012, 12:22 AM

Quote:

Originally Posted by PT'S 70 CST

Mel I am sure if Les made it then it is quality. I was just trying to let those that were viewing the tread know that if you do not know what you are doing then you can screw up a good speed warning.

PT

Geez, thanks for the heads up, i better not touch one of these sw devices, i might screw it up

**Classic Bowties** · 03-12-2012, 07:31 PM

Quote:

Originally Posted by 70shortfleet

I will see what I can do to help you out.

Quote:

Originally Posted by PT'S 70 CST

Les I will make it worth your while for a couple myself. PT

PT, did you back door me on this deal? Even after pm'ing, I have yet to hear from 70shortfleet. Mel

**70shortfleet** · 03-12-2012, 07:51 PM

Mel I haven't had a chance to make any lately how fast do you need these?

**Classic Bowties** · 03-12-2012, 08:09 PM

Quote:

Originally Posted by 70shortfleet

Mel I haven't had a chance to make any lately how fast do you need these?

Needed one set like yesterday, and the other set to fix another broken S/W head. Mel

**70shortfleet** · 03-12-2012, 08:35 PM

I'll see about making a couple of sets in the next 2 days $25 per set

**Classic Bowties** · 03-12-2012, 08:42 PM

Quote:

Originally Posted by 70shortfleet

I'll see about making a couple of sets in the next 2 days $25 per set

Great, count me in and thanks for replying back. Mel

into69z · 03-12-2012, 08:59 PM

70shortfleet-Would you make another set while you have the tools out-I will pay inadvance if you like....please let me know....Steve

**70shortfleet** · 03-13-2012, 09:41 AM

Yes, I will be making extras of these for anyone else that needs these

**Classic Bowties** · 03-16-2012, 10:34 PM

Bttt...

**70shortfleet** · 03-16-2012, 10:45 PM

Mel, Pm me your shipping address and I will send you some

03-03-2012, 12:46 PM	#1
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,579	WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Looking for the below pictured s/w gear and the adjustment drive sleeve that ataches to the end of it. Need two sets, would also purchase any non-operating parts S/W heads if these two pictured parts are good. Thanks in advance for any help or leads on these guys! Mel Attached Images

03-04-2012, 12:14 PM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,579	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Back up...

03-05-2012, 01:13 PM	#3
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,579	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Back to Zee Top...

03-06-2012, 02:46 PM	#4
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Mel, do what I did and make your own Attached Images

03-06-2012, 03:01 PM	#5
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look These get broken from people that do not know that the factory sets these at around 20-22 mph and most that do not know this get these speed warnings and try to turn them down to zero and pop they get broken. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-06-2012, 03:27 PM	#7
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Les this is a very awesome idea but remember that the lip on the main shaft gear keeps all of the other gears from falling out and if this is not setup and installed correctly with the right amount of play then you could loose the rest of your gear cluster. I am sure You know this Les but I am relaying this to the others that are watching or replying to this thread. Also I have been asked in the past about trying to run the repoped Camaro cable that are for sale on various sites. Do not try this approach, you may get it to work for awhile but the truck cable is a 9" cable and the Camaro cable and Vettes, Impala's are 11.5"-13" long and being that they are longer tend to put this gear in a bind and I have seen several people break this shaft trying to use these other adjustment cables. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 03-06-2012 at 03:53 PM.

03-07-2012, 06:31 PM	#9
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Mel I am sure if Les made it then it is quality. I was just trying to let those that were viewing the tread know that if you do not know what you are doing then you can screw up a good speed warning. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-07-2012, 10:49 PM	#10
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Mel, I made those a couple of years ago. I will see what I can do to help you out. Those pieces are high dollar items!

03-07-2012, 11:09 PM	#11
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Les I will make it worth your while for a couple myself. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-07-2012, 11:18 PM	#12
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Les, I think you just found a good source of supplemental income. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-12-2012, 07:51 PM	#15
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Mel I haven't had a chance to make any lately how fast do you need these?

03-12-2012, 08:35 PM	#17
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look I'll see about making a couple of sets in the next 2 days $25 per set

03-12-2012, 08:59 PM	#19
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look 70shortfleet-Would you make another set while you have the tools out-I will pay inadvance if you like....please let me know....Steve __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

03-13-2012, 09:41 AM	#20
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Yes, I will be making extras of these for anyone else that needs these

03-16-2012, 10:34 PM	#21
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,579	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Bttt...



Register or Log In To remove these advertisements.

03-16-2012, 10:45 PM	#22
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: WTB Speed Warning Gear & Sleeve - All You S/W Junkies Please Have a Look Mel, Pm me your shipping address and I will send you some

Register or Log In To remove these advertisements.