SD 2 bbl carb screw needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71swb4x4 · 03-20-2012, 08:17 PM

It happened again!! The screw holding the choke bracket to my carb backed out. I had used blue locktite, this time I will use red. Does anyone have one of these they will sell me?

I need one of the round headed (flat screwdriver) screws that holds a 2 bbl carb together. I have a 67 with a 292, and one of the four screws fell out.

The bolt size is #12 and the thread count is 28 TPI.
From the bottom of the head to the end of the bolt it is about 15/16" long. The head is a little more about 3/16" thick. Total bolt length including head is about 1 1/8".

Here is a picture:

03-20-2012, 08:17 PM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	2 bbl carb screw needed It happened again!! The screw holding the choke bracket to my carb backed out. I had used blue locktite, this time I will use red. Does anyone have one of these they will sell me? I need one of the round headed (flat screwdriver) screws that holds a 2 bbl carb together. I have a 67 with a 292, and one of the four screws fell out. The bolt size is #12 and the thread count is 28 TPI. From the bottom of the head to the end of the bolt it is about 15/16" long. The head is a little more about 3/16" thick. Total bolt length including head is about 1 1/8". Here is a picture: Attached Images __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.