How low can you go without c-notch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

footbraker · 03-21-2012, 06:48 AM

70 c10 leaf springs in rear. Currently I am setup for 3" front drop, 4" rear using lowering coil springs in front, lowering leafs in rear. While we have the front end apart and have a bare frame sitting, I was thinking of going ahead with 2" spindles in front and 2" shackles in rear for a total drop of 5/6. Is this possible without a c notch? I wanna also run 20x8 and 20x10 wheels.

Not sure if a 3/4 drop will be enough for me. Any links to pics of 3/4 drop?
Posted via Mobile Device

big_al_71 · 03-21-2012, 10:09 AM

I had a 4/6 drop on my truck before without a cnoth and it was fine however any kind of real weight in the back the rear end would hit the frame.

**N2TRUX** · 03-21-2012, 11:01 AM

If you have it torn down now, go ahead and do a notch. Your going to want it sooner or later, so do it while the trucks down.

Tony@Roadstershop · 03-21-2012, 11:18 AM

Quote:

Originally Posted by N2TRUX

If you have it torn down now, go ahead and do a notch. Your going to want it sooner or later, so do it while the trucks down.

exactly... especially if you are wanting to go that low. Just do it and get it over with

footbraker · 03-21-2012, 10:40 PM

Is it fairly easy to do now while the beds off? Is 5/6 drop too low to where I will be scraping over speed bumps and stuff? I won't ever be hauling anything with it.

Will 20x8 and 20x10 fit fine?
Posted via Mobile Device

**leddzepp** · 03-21-2012, 11:05 PM

I have a 5/7 slam and no issues going over speed bumps....as long as you go SLOW. I installed my c-notch with the bed on...in hindsight I wish I had done it when my truck was a rolling chassis and it would have been much easier.

I do not know anything about aftermarket wheel/tire combos. I run stock 15" steelies or rallies and there are no back-spacing issues or concerns with tire size...they just fit

Others will be able to help you out on wheel/tire combos.

firedog · 03-22-2012, 12:29 AM

to answer your question my truck is bagged without a c notch, do i wish i had? yes however at the time it wasnt going to happen, here is a pic of my truck with 29" tall tires air'd out this is also prior to moving my exhaust that might give it another 1-2"

03-21-2012, 06:48 AM	#1
footbraker Registered User Join Date: Nov 2011 Location: winston salem, nc Posts: 37	How low can you go without c-notch? 70 c10 leaf springs in rear. Currently I am setup for 3" front drop, 4" rear using lowering coil springs in front, lowering leafs in rear. While we have the front end apart and have a bare frame sitting, I was thinking of going ahead with 2" spindles in front and 2" shackles in rear for a total drop of 5/6. Is this possible without a c notch? I wanna also run 20x8 and 20x10 wheels. Not sure if a 3/4 drop will be enough for me. Any links to pics of 3/4 drop? Posted via Mobile Device

03-21-2012, 10:09 AM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: How low can you go without c-notch? I had a 4/6 drop on my truck before without a cnoth and it was fine however any kind of real weight in the back the rear end would hit the frame. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-21-2012, 11:01 AM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: How low can you go without c-notch? If you have it torn down now, go ahead and do a notch. Your going to want it sooner or later, so do it while the trucks down. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-21-2012, 10:40 PM	#5
footbraker Registered User Join Date: Nov 2011 Location: winston salem, nc Posts: 37	Re: How low can you go without c-notch? Is it fairly easy to do now while the beds off? Is 5/6 drop too low to where I will be scraping over speed bumps and stuff? I won't ever be hauling anything with it. Will 20x8 and 20x10 fit fine? Posted via Mobile Device

03-21-2012, 11:05 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: How low can you go without c-notch? I have a 5/7 slam and no issues going over speed bumps....as long as you go SLOW. I installed my c-notch with the bed on...in hindsight I wish I had done it when my truck was a rolling chassis and it would have been much easier. I do not know anything about aftermarket wheel/tire combos. I run stock 15" steelies or rallies and there are no back-spacing issues or concerns with tire size...they just fit Others will be able to help you out on wheel/tire combos. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-22-2012, 12:29 AM	#7
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,005	Re: How low can you go without c-notch? to answer your question my truck is bagged without a c notch, do i wish i had? yes however at the time it wasnt going to happen, here is a pic of my truck with 29" tall tires air'd out this is also prior to moving my exhaust that might give it another 1-2" Attached Images __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.