Drivers door mirror location.

[62 short step]

Did a search and couldnt find what i need. Does anyone have a pic with measurements for a 64 drivers mirror? The stock small, 3 hole mirror. PO filled in the holes on mine, need to drill out the filler and retap.

[1963c-10]

If you pull of the inside door cover, you can feel the nuts from the inside of the door. If you have a drill with an angeled head, you should be able to drill them out and then retap. Im sure that someone can get you external measurements from someone here too though.

[aerotruk63]

https://lh5.googleusercontent.com/-b...800/image1.jpg

[aerotruk63]

[newbe351]

I've heard that there are nuts on the inside of the passenger door as well. Does anyone know if a passenger side mirror can be installed in the same manner as described in post #2 above?

Thanks

[MisterC]

Yes, the right side mirror can. The nuts are hit or miss, but I believe most trucks had the plate with the correct holes on the inside of the door. Mine did. I just had to use my own lock nuts.

[1963c-10]

yeah, mine had the support plate inside the passenger door, but had to get 3 nuts.

[markeb01]

FYI the dimensions provided above are for a 60-63. 64-66 mirror arms angle uphill toward the front. Post #14 on the attached thread may prove helpful:

http://67-72chevytrucks.com/vboard/s...t=mirror+mount

[62 short step]

Thanks guys! Last question, any idea on screw size? I had some but cant find them now!

[markeb01]

They are 5/16x18. Early 1960 screws look like these with large serrated heads:



Later screws have smaller heads like these reproductions:



Originals look very similar but have a sharper edge around the rim of the head.

[62 short step]

Thank you sir!