The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-29-2012, 04:53 PM   #1
BIG69GMC
Registered User
 
BIG69GMC's Avatar
 
Join Date: Jul 2009
Location: Albuquerque, NM
Posts: 101
Fuel filter placement?

Any recommendations on the best fuel filter and where to place it? I was running one after the pump on my 307 and would get vapor lock issues during the summer, so been running with out it, just have the sock on the pump and filter at the carb. Have you experienced the same issues? Where is your filter? Maybe the filter i had was too big????


TIA Guys!!!
BIG69GMC is offline   Reply With Quote
Old 03-29-2012, 06:14 PM   #2
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,208
Re: Fuel filter placement?

I always put a filter between the tank & pump on these old vehicles. The siphone effect keeps it full & it prevents foriegn particles from reaching the pump which can get into one of the check valves & cause it to fail.
Wrenchbender Ret is offline   Reply With Quote
Old 03-30-2012, 10:53 AM   #3
hayhauler71
Registered User
 
hayhauler71's Avatar
 
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
Re: Fuel filter placement?

Quote:
Originally Posted by Wrenchbender Ret View Post
I always put a filter between the tank & pump on these old vehicles. The siphone effect keeps it full & it prevents foriegn particles from reaching the pump which can get into one of the check valves & cause it to fail.
Thats what im running and no problems for the last 11 years
__________________
Fuzzy
hayhauler71 is offline   Reply With Quote
Old 03-30-2012, 01:58 PM   #4
jmj4
Registered User
 
jmj4's Avatar
 
Join Date: Dec 1999
Location: Mississippi
Posts: 119
Re: Fuel filter placement?

How do you keep from flooding yourself when changing the filter? I've thought you generally put it between the carb & pump therefore higher then the elevation of gas in the tank.
Posted via Mobile Device
Posted via Mobile Device
__________________
1970 GMC Custom 1500 SWB 307/TH350 3.73 Positrac
jmj4 is offline   Reply With Quote
Old 03-30-2012, 02:56 PM   #5
BIG69GMC
Registered User
 
BIG69GMC's Avatar
 
Join Date: Jul 2009
Location: Albuquerque, NM
Posts: 101
Re: Fuel filter placement?

Thanks guys, last night installed it between the tank and the pump, but at the pump if that makes any sense to u? Semed to be fine. Last year had it at the carb and it was giving me problems with vapor lock. Once I removed the filter it was fine but recently picked up some crudd in the carb so trying it again. Yet this time a smaller metal filter compared to the one that I had on there last yr. Soo good so far...
Posted via Mobile Device
BIG69GMC is offline   Reply With Quote
Old 03-30-2012, 02:56 PM   #6
DorianB
Registered User
 
DorianB's Avatar
 
Join Date: Apr 2010
Location: Buford, Ga
Posts: 205
Re: Fuel filter placement?

I have my filter between the pump and the carb and use two vice grips with flat pieces of metal in their mouth to squish the fuel line flat (Rubber obv) while I am switching it out. Moving forward, I am replacing it with hard lines soon and am looking to place two small valves on both sides of the filter to allow me to cut the flow.

I am now wondering if I shouldn't move the filter down in between the tank and the pump like you guys are saying....
DorianB is offline   Reply With Quote
Old 03-30-2012, 03:57 PM   #7
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Fuel filter placement?

i've seen lots of writups and TV articles by pros over the years saying not to have filter between tank and pump/ have read salot of guys vapor locking because of filter between tank and pump
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 03-30-2012, 04:05 PM   #8
67chevemall
Registered User
 
67chevemall's Avatar
 
Join Date: Apr 2003
Location: NB
Posts: 3,367
Re: Fuel filter placement?

Never heard of that one...always thought it went between the pump and carb.. close to the carb. I run my line on a nice arch away from the motor and its heat.
__________________
1968 Chevy C10 307 3ott fleetside
1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold
1967 Chev C/10 step, 383, M21. SOLD
67chevemall is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com