dana 60 front axle rebuild use, sell? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

darksaga · 09-16-2003, 02:15 PM

when I bought my truck the po gave me a dana 60 front axle when I bought the truck (actually I paid $500 more for it and gobs and gobs of spare parts)

I have been debateing on useing it or selling it

-when I opened the diff cover oil and water sludge came out water and oil was clean, gears are not rusted but caps are
-its out of a dually truck canI use this to convert it? http://cgi.ebay.com/ebaymotors/ws/eB...category=33728

It looks like I will have to do an overhaul to use it beacause the bearings are prob shot and thats how I am I don't trust boneyard functional parts

If I where to sell as is how much could I get out of it?

I don't plan on going realy big with tires or anything but I would really really like to use the disc brakes off of it

72beast · 09-17-2003, 01:23 AM

as you can see the hubs are $400.00 for the set, not sure on the cost of the rebuild kit...around $200.00...how are the brakes on it, if you need parts for that then add them on too...a rebuildable one can get you $500.00 to $750.00 but with the water and all not sure what you could get. If you had the SRW axle then it would be worth more....let me know about the brakes cause if there good I would take it for around the $500.00 amount you paid for it...

darksaga · 09-17-2003, 01:43 AM

it has no calipers or hubs

72beast · 09-17-2003, 12:07 PM

what would you take for it, if the price was right I could buy the missing part and get that thing under my truck....let me know..
tonypeebs@hotmail.com

barraza · 09-17-2003, 01:55 PM

A useable dana 60 for a SRW application goes for 900 to 1200 depending on gears/locker/condition. Almost no demand for DRW types except as cores to convert to SRW. Since yours needs hubs($400) and calipers and possibly bearings. $500 is reasonable. Shipping can kill the deal because these pigs are HEAVY! 450-500lbs IIR

09-16-2003, 02:15 PM	#1
darksaga Registered User Join Date: Nov 2002 Location: santa cruz cali Posts: 118	dana 60 front axle rebuild use, sell? when I bought my truck the po gave me a dana 60 front axle when I bought the truck (actually I paid $500 more for it and gobs and gobs of spare parts) I have been debateing on useing it or selling it -when I opened the diff cover oil and water sludge came out water and oil was clean, gears are not rusted but caps are -its out of a dually truck canI use this to convert it? http://cgi.ebay.com/ebaymotors/ws/eB...category=33728 It looks like I will have to do an overhaul to use it beacause the bearings are prob shot and thats how I am I don't trust boneyard functional parts If I where to sell as is how much could I get out of it? I don't plan on going realy big with tires or anything but I would really really like to use the disc brakes off of it __________________ 1968 gmc 3/4 4x4 longbed. built 469 700r4 (needs a th400 REAL SOON!), 14bolt ff rear 73 3/4 dana 44 1970 chevelle all wheel disc, tubular rear control arms tall spindle swap up front matching #'s 350 work in Progress

09-17-2003, 01:23 AM	#2
72beast TONYP Join Date: Oct 2001 Location: So Cal Posts: 100	as you can see the hubs are $400.00 for the set, not sure on the cost of the rebuild kit...around $200.00...how are the brakes on it, if you need parts for that then add them on too...a rebuildable one can get you $500.00 to $750.00 but with the water and all not sure what you could get. If you had the SRW axle then it would be worth more....let me know about the brakes cause if there good I would take it for around the $500.00 amount you paid for it... __________________ 72 K/5 350/205 SOFT-TOP DOUG THORLEY HEADERS A/C CUSTOM REAR BUMPER http://www.socalbigdawgs.com/tr/7.18.03/DSC04290.JPG

09-17-2003, 01:43 AM	#3
darksaga Registered User Join Date: Nov 2002 Location: santa cruz cali Posts: 118	it has no calipers or hubs __________________ 1968 gmc 3/4 4x4 longbed. built 469 700r4 (needs a th400 REAL SOON!), 14bolt ff rear 73 3/4 dana 44 1970 chevelle all wheel disc, tubular rear control arms tall spindle swap up front matching #'s 350 work in Progress

09-17-2003, 12:07 PM	#4
72beast TONYP Join Date: Oct 2001 Location: So Cal Posts: 100	what would you take for it, if the price was right I could buy the missing part and get that thing under my truck....let me know.. tonypeebs@hotmail.com __________________ 72 K/5 350/205 SOFT-TOP DOUG THORLEY HEADERS A/C CUSTOM REAR BUMPER http://www.socalbigdawgs.com/tr/7.18.03/DSC04290.JPG

09-17-2003, 01:55 PM	#5
barraza Registered User Join Date: Jul 2003 Location: N. Alabama Posts: 131	A useable dana 60 for a SRW application goes for 900 to 1200 depending on gears/locker/condition. Almost no demand for DRW types except as cores to convert to SRW. Since yours needs hubs($400) and calipers and possibly bearings. $500 is reasonable. Shipping can kill the deal because these pigs are HEAVY! 450-500lbs IIR



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.