Can a 71 rad supt be made to work on a 68? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Danny Bost · 09-29-2011, 10:53 PM

I had some scrap metal haulers come and take some stuff from my house the other day while I wasn't there. BIG mistake. They hauled off the rad supt to my 68 front end that I am putting on my 71. Is there a way to make the 71 rad supt work. I know I will need to remove the headlamp mounts that protrude and make the holes for the adjusters. Is there anything else, or is this just not going to work?

Danny Bost · 10-01-2011, 11:37 AM

Any suggestions??

evilways · 10-04-2011, 01:57 AM

I had one on my 67. Fit like any other. The headlights are the only problem. I could not get the lights to sit right. I tried a couple different things, but couldn’t get away from the lights bugging out or being out of alignment of the bezel. Long story short I found a 67/68 core and replaced it. If anyone else has had good results they might chime in, but I got tired of messing around with it.

Danny Bost · 10-04-2011, 08:41 AM

Thanks for the reply. I am going to be looking for the correct support, but I am just getting back to work after being laid off, so money is a bit of an issue as well.

gcburdic · 10-04-2011, 09:53 AM

I think these are opposite from what you are looking but thought they could help??

http://67-72chevytrucks.com/vboard/s...d.php?t=454839

http://67-72chevytrucks.com/vboard/s...d.php?t=399960

Danny Bost · 03-31-2012, 11:07 PM

Quote:

Originally Posted by gcburdic

I think these are opposite from what you are looking but thought they could help??

http://67-72chevytrucks.com/vboard/s...d.php?t=454839

http://67-72chevytrucks.com/vboard/s...d.php?t=399960

The second one is exactly what I needed. I don't know how I missed your reply, but thanks a bunch.
Danny

gysgtc · 04-01-2012, 06:15 AM

I am doing the same mod to mine right now.

Danny Bost · 04-01-2012, 09:30 AM

I wouldn't bother except the rad support I have is totally rust free and I am on a tight budget. Labor is cheap when it is for myself. The second link the earlier post is pretty good. It shows a lot on what needs to be done.
Danny

Dano69c10 · 04-01-2012, 12:23 PM

Yes you can, I've done a few. Just remove the '71 headlight buckets. The '68 buckets are underneath. If I remember corectly you just have to drill a tiny hole for the headlight holder spring.

gysgtc · 04-01-2012, 03:19 PM

Same here. I already have a clean 69 rad. sup. My 67 rad. sup is rusted under the battery tray pretty bad. It is not real easy for sure.

09-29-2011, 10:53 PM	#1
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Can a 71 rad supt be made to work on a 68? I had some scrap metal haulers come and take some stuff from my house the other day while I wasn't there. BIG mistake. They hauled off the rad supt to my 68 front end that I am putting on my 71. Is there a way to make the 71 rad supt work. I know I will need to remove the headlamp mounts that protrude and make the holes for the adjusters. Is there anything else, or is this just not going to work? __________________ Danny 71 SWB

10-01-2011, 11:37 AM	#2
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: Can a 71 rad supt be made to work on a 68? Any suggestions?? __________________ Danny 71 SWB

10-04-2011, 01:57 AM	#3
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Re: Can a 71 rad supt be made to work on a 68? I had one on my 67. Fit like any other. The headlights are the only problem. I could not get the lights to sit right. I tried a couple different things, but couldn’t get away from the lights bugging out or being out of alignment of the bezel. Long story short I found a 67/68 core and replaced it. If anyone else has had good results they might chime in, but I got tired of messing around with it. __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project

10-04-2011, 08:41 AM	#4
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: Can a 71 rad supt be made to work on a 68? Thanks for the reply. I am going to be looking for the correct support, but I am just getting back to work after being laid off, so money is a bit of an issue as well. __________________ Danny 71 SWB

10-04-2011, 09:53 AM	#5
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Can a 71 rad supt be made to work on a 68? I think these are opposite from what you are looking but thought they could help?? http://67-72chevytrucks.com/vboard/s...d.php?t=454839 http://67-72chevytrucks.com/vboard/s...d.php?t=399960 __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

04-01-2012, 06:15 AM	#7
gysgtc Registered User Join Date: Apr 2010 Location: Sutton, WV Posts: 340	Re: Can a 71 rad supt be made to work on a 68? I am doing the same mod to mine right now.

04-01-2012, 09:30 AM	#8
Danny Bost Registered User Join Date: Dec 2009 Location: Aztec NM Posts: 229	Re: Can a 71 rad supt be made to work on a 68? I wouldn't bother except the rad support I have is totally rust free and I am on a tight budget. Labor is cheap when it is for myself. The second link the earlier post is pretty good. It shows a lot on what needs to be done. Danny __________________ Danny 71 SWB

04-01-2012, 12:23 PM	#9
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: Can a 71 rad supt be made to work on a 68? Yes you can, I've done a few. Just remove the '71 headlight buckets. The '68 buckets are underneath. If I remember corectly you just have to drill a tiny hole for the headlight holder spring. __________________ '69 Fleet It ain't yours, if you didn't build it!

04-01-2012, 03:19 PM	#10
gysgtc Registered User Join Date: Apr 2010 Location: Sutton, WV Posts: 340	Re: Can a 71 rad supt be made to work on a 68? Same here. I already have a clean 69 rad. sup. My 67 rad. sup is rusted under the battery tray pretty bad. It is not real easy for sure.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.