Inner Fenders on a Budget - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lotik · 04-04-2012, 09:45 PM

About 4 Hours and 2 $30 trailer fenders later...

I didn't realize how much clearance the tires would need, but the inner fenders had to be placed almost even with the tops of the fenders, allowing about a 1/4" gap when the truck is laid out. Some massaging the bottom side of the hood will need to be done, but shouldn't be too big of a deal.

Next up is a set up Porterbuilt hood hinges, and all the welding and cutting should finally be complete.

VA72C10 · 04-04-2012, 10:21 PM

Looking good!

trkfrk · 04-04-2012, 10:52 PM

Wow!!! I like it.. Simple and clean....

tubbedII · 04-05-2012, 02:06 PM

Looks good! Did you get them locally or online? If online, mind shooting out a link?

JRANGER · 04-05-2012, 02:15 PM

So I take it your gonna modify the hood to fit since they look in the way of it laying flat?

lotik · 04-05-2012, 02:29 PM

Quote:

Originally Posted by tubbedII

Looks good! Did you get them locally or online? If online, mind shooting out a link?

I picked the fenders up locally. Any trailer supply should have them in stock. These are 9" wide.

lotik · 04-05-2012, 02:31 PM

Quote:

Originally Posted by JRANGER

So I take it your gonna modify the hood to fit since they look in the way of it laying flat?

Yes. I looked at the hood and it looks like I can just cut the pinch weld section that extends below the top of the fender. I only have to cut the distance that the inner fender is exposed. I can the weld the hood back up. Shouldn't be too difficult. I'll post some more pics after I get that done.

04-04-2012, 09:45 PM	#1
lotik drag it like you stole it Join Date: Feb 2002 Location: Louisiana Posts: 542	Inner Fenders on a Budget About 4 Hours and 2 $30 trailer fenders later... I didn't realize how much clearance the tires would need, but the inner fenders had to be placed almost even with the tops of the fenders, allowing about a 1/4" gap when the truck is laid out. Some massaging the bottom side of the hood will need to be done, but shouldn't be too big of a deal. Next up is a set up Porterbuilt hood hinges, and all the welding and cutting should finally be complete. Attached Images __________________ negative camber //LA\\

04-04-2012, 10:21 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Inner Fenders on a Budget Looking good! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-04-2012, 10:52 PM	#3
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Inner Fenders on a Budget Wow!!! I like it.. Simple and clean.... __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

04-05-2012, 02:06 PM	#4
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Inner Fenders on a Budget Looks good! Did you get them locally or online? If online, mind shooting out a link? __________________ 1970 2wd Blazer

04-05-2012, 02:15 PM	#5
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Inner Fenders on a Budget So I take it your gonna modify the hood to fit since they look in the way of it laying flat? __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.